[Sat Aug  4 03:51:26 2012] Detection parameters:
  Position = (287.9, 248.0) = 18 52 37.16 0 38 1.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 636.8 +/- 34.5
  Background counts = 68.4
  Rate = 0.03 +/- 0.001

[Sat Aug  4 03:51:27 2012] Off-axis axis estimate = 3.74'
[Sat Aug  4 06:38:48 2012] Using EEF radius (= 8.30 ")to estimate initial spatial extent for simple fitting
[Sat Aug  4 06:38:48 2012] Initial guess for spatial extent in simple fitting = 8.30"
[Sat Aug  4 06:38:48 2012] source mask rpix=1.9, npix_max = 23, mask sum = 16, frac = 0.690
[Sat Aug  4 06:38:48 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.30"
[Sat Aug  4 09:00:36 2012] fullrun_mos2_xmm0550671301_pi300-10000_cl_pass0_src3.ximg exists
[Sat Aug  4 09:00:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671301_pi300-10000_cl_pass0_src3.csv
[Sat Aug  4 09:00:36 2012] fullrun_mos2_xmm0550671301_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Aug  4 09:00:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671301_pi300-10000_cl_pass0_src3.csv
[Sat Aug  4 09:00:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 09:00:37 2012] fullrun_mos2_xmm0550671301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Aug  4 09:00:37 2012] fullrun_mos2_xmm0550671301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Aug  4 09:00:37 2012] Fit fullrun_mos2_xmm0550671301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Aug  4 09:00:57 2012] Spatial fit model total counts = 3066.460000, observed total counts = 3064.000000
[Sat Aug  4 09:00:57 2012] Offset between fit and detection position for source 10 = 4.872730 pixels
[Sat Aug  4 09:00:57 2012] 3215.320000 total counts/ 1923.150000 bgd. counts: snr = 29.465450
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 4.872730 pixels
  Position = (283.7, 245.5) = 18 52 38.37 0 37 50.0
  Extent = 16.6 (16.6-33.2)", rotation angle = 0
  Source counts = 1292.2 +/- 56.7
  Background counts = 1923.2
  Rate = 0.05 +/- 0.002
[Sat Aug  4 09:00:57 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 09:00:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 09:00:57 2012] Assessing source extent using major axis lower bound
[Sat Aug  4 09:00:57 2012] Source does appear to be extended
[Sat Aug  4 09:00:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 09:00:57 2012] Source is confused with source 7
[Sat Aug  4 13:16:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug  4 13:16:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug  4 13:16:15 2012] Initial guess for spatial extent in simple fitting = 16.59"
[Sat Aug  4 13:16:15 2012] source mask rpix=3.8, npix_max = 74, mask sum = 81, frac = 1.088
[Sat Aug  4 13:16:15 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 16.59"
[Sat Aug  4 17:00:18 2012] fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_src3.ximg exists
[Sat Aug  4 17:00:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_src3.csv
[Sat Aug  4 17:00:18 2012] fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Aug  4 17:00:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_src3.csv
[Sat Aug  4 17:00:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 17:00:20 2012] fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Aug  4 17:00:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat Aug  4 17:00:20 2012] fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Aug  4 17:00:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat Aug  4 17:00:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671301_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 17:00:48 2012] Warning, spatial fit 3 centroid is now closest to src. 7
[Sat Aug  4 17:00:49 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 17:00:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 17:00:49 2012] Assessing source extent using major axis lower bound
[Sat Aug  4 17:00:49 2012] Source does appear to be extended
[Sat Aug  4 17:00:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 02:50:05 2012] Counts = 1292.170000, rescaling region sizes by 2.000000
[Sun Aug  5 02:50:05 2012] XMMSAS src. selection expression = ellipse(24637.026000, 21308.154000, 1991.172057, 1991.172057, 0.000000, X, Y)
[Sun Aug  5 02:50:05 2012] Writing source region out to fullrun_mos2_xmm0550671301_pi300-10000_pass1_cl_src10_src.reg
[Sun Aug  5 02:50:05 2012] Extracting stamp from image fullrun_mos2_xmm0550671301_pi300-10000_cl_sm2.00.img.gz, (169, 131) - (398, 360)
[Sun Aug  5 02:50:05 2012] XMMSAS bgd. selection expression = annulus(24637.026000, 21308.154000, 6637.240191, 13274.480382, X, Y) && !ellipse(22142.860140, 15878.489800, 557.084016, 557.084016, 0.000000, X, Y) && !ellipse(24593.382000, 24307.573400, 315.592809, 315.592809, 0.000000, X, Y) && !ellipse(25711.418000, 22042.212000, 2599.752075, 2599.752075, 0.000000, X, Y) && !ellipse(22588.860000, 22064.728000, 1373.408040, 1373.408040, 0.000000, X, Y) && !ellipse(22201.478800, 23197.502000, 1322.400038, 1322.400038, 0.000000, X, Y) && !ellipse(22575.384000, 21442.478000, 2888.896083, 2888.896083, 0.000000, X, Y) && !ellipse(25275.952000, 21808.826000, 2010.528058, 1154.208033, 138.457000, X, Y) && !ellipse(21896.098000, 22808.920000, 2745.336079, 2745.336079, 0.000000, X, Y) && !ellipse(26010.416000, 23644.982000, 1165.872034, 1165.872034, 0.000000, X, Y) && !ellipse(26593.567000, 22745.756000, 2249.728065, 551.711216, 118.588000, X, Y) && !ellipse(25376.910000, 23922.140600, 1368.096039, 800.824023, 38.143000, X, Y) && !ellipse(24641.993200, 26825.986000, 803.648023, 803.648023, 0.000000, X, Y) && !ellipse(26065.011880, 24895.302200, 1053.912030, 1053.912030, 0.000000, X, Y) && !ellipse(27281.281400, 26524.330400, 1016.968029, 1016.968029, 0.000000, X, Y) && !ellipse(23261.369537, 22749.556885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27340.575200, 25816.180600, 1119.232032, 1119.232032, 0.000000, X, Y) && !ellipse(22512.600200, 23221.440000, 2598.536075, 2598.536075, 0.000000, X, Y) && !ellipse(25123.931000, 24388.424164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26385.485800, 22517.412000, 1339.904039, 1339.904039, 0.000000, X, Y) && !ellipse(21539.367040, 25071.788600, 1323.688038, 705.117620, 87.825280, X, Y) && !ellipse(24028.603973, 23450.715607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22457.916000, 24030.880000, 734.470421, 734.470421, 0.000000, X, Y) && !ellipse(26860.832000, 23621.266000, 1171.832034, 1171.832034, 0.000000, X, Y) && !ellipse(25023.478000, 26665.266000, 1053.528030, 1053.528030, 0.000000, X, Y) && !ellipse(27200.476000, 24249.526000, 1004.048029, 1004.048029, 0.000000, X, Y) && !ellipse(28221.738000, 25582.530000, 2388.304069, 2388.304069, 0.000000, X, Y) && !ellipse(19823.180400, 23370.007800, 705.992820, 705.992820, 0.000000, X, Y) && !ellipse(27310.217800, 25556.532000, 1049.376030, 1049.376030, 0.000000, X, Y) && !ellipse(19260.124400, 25375.433200, 694.520820, 694.520820, 0.000000, X, Y) && !ellipse(21463.785800, 26454.933000, 1328.632038, 1328.632038, 0.000000, X, Y) && !ellipse(27298.626000, 26675.172000, 997.680029, 997.680029, 0.000000, X, Y) && !ellipse(19832.946447, 24032.290748, 1447.960042, 358.512345, 90.575765, X, Y) && !ellipse(23974.624573, 22482.614929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22591.410000, 21194.874000, 2927.584084, 2927.584084, 0.000000, X, Y) && !ellipse(25490.236600, 26062.423800, 1053.528030, 432.056812, 241.082000, X, Y) && !ellipse(19163.494600, 27471.569600, 429.877612, 429.877612, 0.000000, X, Y) && !ellipse(21388.991104, 25970.287964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21049.945600, 21068.899200, 532.524015, 532.524015, 0.000000, X, Y) && !ellipse(26087.632000, 28103.368000, 1145.736033, 1145.736033, 0.000000, X, Y) && !ellipse(23103.018280, 23606.422455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21699.276000, 20477.380000, 2303.104066, 2002.032058, 66.185000, X, Y) && !ellipse(28125.696503, 26473.615143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19753.149200, 22715.951400, 941.520027, 941.520027, 0.000000, X, Y) && !ellipse(18677.502200, 11088.328600, 596.731217, 596.731217, 0.000000, X, Y) && !ellipse(21555.497000, 26724.292200, 1041.320030, 1041.320030, 0.000000, X, Y) && !ellipse(26200.072784, 26307.131531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19757.380020, 21892.271820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26657.114000, 27804.928000, 1479.208043, 1479.208043, 0.000000, X, Y) && !ellipse(22126.472000, 19998.182000, 1444.448042, 1444.448042, 0.000000, X, Y)
[Sun Aug  5 02:50:05 2012] Writing fullrun_mos2_xmm0550671301_pi300-10000_pass1_cl_src10.gif
[Sun Aug  5 02:50:36 2012] Mean detx,y = (279.21, 2678.09) 
[Sun Aug  5 02:50:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug  5 02:53:28 2012] Binned source spectrum to 10 counts/bin
[Sun Aug  5 02:53:28 2012] Setting source spectrum file to fullrun_mos2_xmm0550671301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Aug  5 02:53:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550671301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun Aug  5 10:27:03 2012] Updating aperture counts using extracted products
[Sun Aug  5 10:27:03 2012] Error reading totcts from fullrun_mos2_xmm0550671301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Aug  5 10:27:06 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug  5 10:27:06 2012] Using photon index=1.80, rate=0.0486, arf fullrun_mos2_xmm0550671301_pi300-10000_pass1_cl_src10.arf
[Sun Aug  5 10:27:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug  5 10:27:06 2012] Updating source flux to 4.8e-13
[Sun Aug  5 10:37:32 2012] Flag c found in src. 10 procflags, skipping spectral fitting