[Sat Aug 4 03:50:54 2012] Detection parameters: Position = (308.0, 268.1) = 18 52 31.34 0 39 29.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 152.8 +/- 21.6 Background counts = 88.9 Rate = 0.006 +/- 0.0009 [Sat Aug 4 03:50:54 2012] Off-axis axis estimate = 2.31' [Sat Aug 4 04:36:09 2012] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting [Sat Aug 4 04:36:09 2012] Initial guess for spatial extent in simple fitting = 7.58" [Sat Aug 4 04:36:09 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.795 [Sat Aug 4 04:36:09 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 7.58" [Sat Aug 4 06:38:47 2012] fullrun_mos1_xmm0550671301_pi300-10000_cl_pass0_src29.ximg exists [Sat Aug 4 06:38:47 2012] fullrun_mos1_xmm0550671301_pi300-10000_cl_pass0_src29_1.ximg exists [Sat Aug 4 06:38:47 2012] Fit fullrun_mos1_xmm0550671301_pi300-10000_cl_pass0_src29 appears to have run properly [Sat Aug 4 06:38:47 2012] fullrun_mos1_xmm0550671301_pi300-10000_cl_pass0_tfrozen_src29.ximg exists [Sat Aug 4 06:38:47 2012] fullrun_mos1_xmm0550671301_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists [Sat Aug 4 06:38:47 2012] Fit fullrun_mos1_xmm0550671301_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly [Sat Aug 4 09:00:49 2012] Source 41 is offset by 0.854902 and -4.213820 pixels which is larger than 2 X fitted extent = 3.780612 x 3.780612, not incorporating fit results [Sat Aug 4 09:00:49 2012] Source 41 is offset by -7.001075 and 6.058295 pixels which is larger than 2 X fitted extent = 6.971724 x 6.971724, not incorporating fit results [Sat Aug 4 09:00:49 2012] Vigneting correction estimate = 1.000000 [Sat Aug 4 09:00:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Aug 4 09:00:49 2012] Assessing source extent using major [Sat Aug 4 09:00:49 2012] Source does appear to be extended [Sat Aug 4 09:00:49 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Aug 4 09:00:49 2012] Source is confused with source 4 [Sat Aug 4 09:31:29 2012] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting [Sat Aug 4 09:31:29 2012] Initial guess for spatial extent in simple fitting = 7.58" [Sat Aug 4 09:31:29 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.795 [Sat Aug 4 09:31:29 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 7.58" [Sat Aug 4 13:16:12 2012] fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_src29.ximg exists [Sat Aug 4 13:16:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_src29.csv [Sat Aug 4 13:16:12 2012] fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_src29_1.ximg exists [Sat Aug 4 13:16:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_src29.csv [Sat Aug 4 13:16:12 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_src29_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Aug 4 13:16:14 2012] fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_tfrozen_src29.ximg exists [Sat Aug 4 13:16:14 2012] fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists [Sat Aug 4 13:16:14 2012] Fit fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly [Sat Aug 4 17:00:37 2012] Source 41 is offset by 3.718411 and 4.829477 pixels which is larger than 2 X fitted extent = 3.024901 x 3.024901, not incorporating fit results [Sat Aug 4 17:00:37 2012] Spatial fit model total counts = 1675.530000, observed total counts = 1720.000000 [Sat Aug 4 17:00:37 2012] Offset between fit and detection position for source 41 = 4.289217 pixels [Sat Aug 4 17:00:37 2012] Warning, changing simple spatial fit ID from 29 to 24 [Sat Aug 4 17:00:37 2012] 1570.812000 total counts/ 1365.860000 bgd. counts: snr = 5.545607 Spatial fit parameters: Offset between fit and detection position for source 41 = 4.289217 pixels Position = (307.2, 272.3) = 18 52 31.57 0 39 46.7 Extent = 13.4 (10.9-14.6)" x 6.9 (4.8-8.9)", rotation angle = 161 (90-271) degrees Source counts = 205.0 +/- 39.6 Background counts = 1365.9 Rate = 0.008 +/- 0.001 [Sat Aug 4 17:00:37 2012] Spatial fit model total counts = 1976.090000, observed total counts = 1986.000000 [Sat Aug 4 17:00:37 2012] Offset between fit and detection position for source 41 = 1.595588 pixels [Sat Aug 4 17:00:37 2012] Warning, changing simple spatial fit ID from 24 to 29 [Sat Aug 4 17:00:37 2012] 1889.722000 total counts/ 1494.790000 bgd. counts: snr = 10.214856 Spatial fit parameters: Offset between fit and detection position for source 41 = 1.595588 pixels Position = (308.8, 272.1) = 18 52 31.11 0 39 45.7 Extent = 15.2 (15.1-30.3)", rotation angle = 0 Source counts = 394.9 +/- 43.5 Background counts = 1494.8 Rate = 0.01 +/- 0.002 [Sat Aug 4 17:00:37 2012] Vigneting correction estimate = 1.000000 [Sat Aug 4 17:00:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Aug 4 17:00:37 2012] Assessing source extent using major axis lower bound [Sat Aug 4 17:00:37 2012] Source does appear to be extended [Sat Aug 4 17:00:37 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Aug 4 18:35:55 2012] XMMSAS src. selection expression = ellipse(26814.292600, 23621.692000, 909.810026, 909.810026, 0.000000, X, Y) [Sat Aug 4 18:35:55 2012] Writing source region out to fullrun_mos1_xmm0550671301_pi300-10000_pass1_cl_src41_src.reg [Sat Aug 4 18:35:55 2012] Extracting stamp from image fullrun_mos1_xmm0550671301_pi300-10000_cl_sm2.00.img.gz, (256, 220) - (361, 324) [Sat Aug 4 18:35:55 2012] XMMSAS bgd. selection expression = annulus(26814.292600, 23621.692000, 1516.350044, 3032.700087, X, Y) && !ellipse(24585.614000, 24392.508000, 301.951209, 301.951209, 0.000000, X, Y) && !ellipse(25148.220000, 21747.270000, 2536.928073, 1565.808045, 144.408000, X, Y) && !ellipse(25613.092000, 22104.398000, 1268.464036, 1268.464036, 0.000000, X, Y) && !ellipse(23796.190000, 21032.440800, 1380.336040, 1380.336040, 0.000000, X, Y) && !ellipse(22521.028000, 22079.816000, 1381.064040, 1381.064040, 0.000000, X, Y) && !ellipse(25746.058000, 23742.729800, 1184.176034, 1184.176034, 0.000000, X, Y) && !ellipse(26346.846000, 23257.746000, 2368.352068, 2368.352068, 0.000000, X, Y) && !ellipse(24792.380000, 24227.002000, 2341.408067, 2341.408067, 0.000000, X, Y) && !ellipse(22959.216583, 21531.787872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24751.502000, 26868.583000, 1125.560032, 1125.560032, 0.000000, X, Y) && !ellipse(24036.962000, 23496.016000, 1269.376037, 1269.376037, 0.000000, X, Y) && !ellipse(25971.636000, 23593.138000, 1171.040034, 1171.040034, 0.000000, X, Y) && !ellipse(22634.538000, 23718.553040, 1267.584036, 1267.584036, 0.000000, X, Y) && !ellipse(27360.514600, 26636.068000, 1141.272033, 1141.272033, 0.000000, X, Y) && !ellipse(26002.070200, 24914.595000, 762.695222, 762.695222, 0.000000, X, Y) && !ellipse(27263.238400, 25643.075400, 1127.112032, 1127.112032, 0.000000, X, Y) && !ellipse(22993.684174, 23090.669739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26941.182400, 24293.722000, 1052.888030, 1052.888030, 0.000000, X, Y) && !ellipse(22177.610000, 22471.488000, 2201.960063, 2201.960063, 0.000000, X, Y) && !ellipse(27932.774000, 25458.576000, 1150.784033, 1150.784033, 0.000000, X, Y) && !ellipse(27209.554749, 27003.532440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28458.305800, 25101.300800, 756.891222, 756.891222, 0.000000, X, Y) && !ellipse(26881.332000, 25866.658000, 1075.472031, 1075.472031, 0.000000, X, Y) && !ellipse(28496.035600, 26154.925600, 1016.272029, 1016.272029, 0.000000, X, Y) && !ellipse(25404.829600, 25814.158000, 1091.312031, 1091.312031, 0.000000, X, Y) && !ellipse(27075.366913, 24536.057068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24776.000031, 24808.436523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23151.708862, 23631.908081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25864.688000, 26233.186600, 1069.624031, 1069.624031, 0.000000, X, Y) [Sat Aug 4 18:35:55 2012] Writing fullrun_mos1_xmm0550671301_pi300-10000_pass1_cl_src41.gif [Sat Aug 4 19:12:27 2012] Mean detx,y = (815.62, -2374.51) [Sat Aug 4 19:12:28 2012] Setting backscal keywords in source and bgd. spectrum [Sat Aug 4 19:12:36 2012] Binned source spectrum to 10 counts/bin [Sat Aug 4 19:12:36 2012] Setting source spectrum file to fullrun_mos1_xmm0550671301_pi300-10000_pass1_cl_src41_src_b10.pi.gz [Sat Aug 4 19:12:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550671301_pi300-10000_pass1_cl_src41_bgd.pi.gz [Sun Aug 5 10:26:59 2012] Updating aperture counts using extracted products [Sun Aug 5 10:26:59 2012] Error reading totcts from fullrun_mos1_xmm0550671301_pi300-10000_pass1_cl_src41_src_b10.pi.gz [Sun Aug 5 10:27:01 2012] Calculating source flux in energy range 0.30-8.00 [Sun Aug 5 10:27:01 2012] Using photon index=1.80, rate=0.0148, arf fullrun_mos1_xmm0550671301_pi300-10000_pass1_cl_src41.arf [Sun Aug 5 10:27:01 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sun Aug 5 10:27:01 2012] Updating source flux to 1.5e-13 [Sun Aug 5 10:27:11 2012] Flag b found in src. 41 procflags, skipping spectral fitting [Sun Aug 5 10:27:11 2012] Flag c found in src. 41 procflags, skipping spectral fitting