[Sat Aug  4 03:50:53 2012] Detection parameters:
  Position = (245.9, 297.1) = 18 52 49.34 0 41 35.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.3 +/- 18.1
  Background counts = 90.5
  Rate = 0.004 +/- 0.0007

[Sat Aug  4 03:50:54 2012] Off-axis axis estimate = 3.81'
[Sat Aug  4 04:36:09 2012] Using EEF radius (= 8.33 ")to estimate initial spatial extent for simple fitting
[Sat Aug  4 04:36:09 2012] Initial guess for spatial extent in simple fitting = 8.33"
[Sat Aug  4 04:36:09 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.857
[Sat Aug  4 04:36:09 2012] Giving source the simple spatial ID 44 for pass 0, mean size = 8.33"
[Sat Aug  4 06:38:47 2012] fullrun_mos1_xmm0550671301_pi300-10000_cl_pass0_src44.ximg exists
[Sat Aug  4 06:38:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671301_pi300-10000_cl_pass0_src44.csv
[Sat Aug  4 06:38:47 2012] fullrun_mos1_xmm0550671301_pi300-10000_cl_pass0_src44_1.ximg exists
[Sat Aug  4 06:38:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671301_pi300-10000_cl_pass0_src44.csv
[Sat Aug  4 06:38:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550671301_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550671301_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 06:38:48 2012] fullrun_mos1_xmm0550671301_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Sat Aug  4 06:38:48 2012] fullrun_mos1_xmm0550671301_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Sat Aug  4 06:38:48 2012] Fit fullrun_mos1_xmm0550671301_pi300-10000_cl_pass0_tfrozen_src44 appears to have run properly
[Sat Aug  4 09:00:49 2012] Warning: source 44 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 10.237301 pixels away
[Sat Aug  4 09:00:49 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 09:00:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 09:00:49 2012] Assessing source extent using major
[Sat Aug  4 09:00:49 2012] Source does appear to be extended
[Sat Aug  4 09:00:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 09:00:49 2012] Source is confused with source 22
[Sat Aug  4 09:31:29 2012] Using EEF radius (= 8.33 ")to estimate initial spatial extent for simple fitting
[Sat Aug  4 09:31:29 2012] Initial guess for spatial extent in simple fitting = 8.33"
[Sat Aug  4 09:31:29 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.857
[Sat Aug  4 09:31:29 2012] Giving source the simple spatial ID 43 for pass 1, mean size = 8.33"
[Sat Aug  4 13:16:13 2012] fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_src43.ximg exists
[Sat Aug  4 13:16:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_src43.csv
[Sat Aug  4 13:16:13 2012] fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_src43_1.ximg exists
[Sat Aug  4 13:16:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_src43.csv
[Sat Aug  4 13:16:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 13:16:14 2012] fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Sat Aug  4 13:16:14 2012] fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Sat Aug  4 13:16:14 2012] Fit fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Sat Aug  4 17:00:37 2012] Spatial fit model total counts = 1066.480000, observed total counts = 1110.000000
[Sat Aug  4 17:00:37 2012] Offset between fit and detection position for source 25 = 1.137185 pixels
[Sat Aug  4 17:00:37 2012] 963.375000 total counts/ 754.832000 bgd. counts: snr = 7.590501
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 1.137185 pixels
  Position = (246.1, 298.2) = 18 52 49.30 0 41 39.5
  Extent = 12.1 (7.9-16.7)", rotation angle = 0
  Source counts = 208.5 +/- 31.0
  Background counts = 754.8
  Rate = 0.008 +/- 0.001
[Sat Aug  4 17:00:37 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 17:00:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 17:00:37 2012] Assessing source extent using major axis lower bound
[Sat Aug  4 17:00:37 2012] Source does appear to be extended
[Sat Aug  4 17:00:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 18:35:55 2012] XMMSAS src. selection expression = ellipse(21358.111420, 25897.181740, 727.434021, 727.434021, 0.000000, X, Y)
[Sat Aug  4 18:35:55 2012] Writing source region out to fullrun_mos1_xmm0550671301_pi300-10000_pass1_cl_src25_src.reg
[Sat Aug  4 18:35:55 2012] Extracting stamp from image fullrun_mos1_xmm0550671301_pi300-10000_cl_sm2.00.img.gz, (204, 256) - (288, 340)
[Sat Aug  4 18:35:55 2012] XMMSAS bgd. selection expression = annulus(21358.111420, 25897.181740, 1212.390035, 2424.780070, X, Y) && !ellipse(25148.220000, 21747.270000, 2536.928073, 1565.808045, 144.408000, X, Y) && !ellipse(24792.380000, 24227.002000, 2341.408067, 2341.408067, 0.000000, X, Y) && !ellipse(24751.502000, 26868.583000, 1125.560032, 1125.560032, 0.000000, X, Y) && !ellipse(24036.962000, 23496.016000, 1269.376037, 1269.376037, 0.000000, X, Y) && !ellipse(21573.554800, 24969.093000, 807.128023, 807.128023, 0.000000, X, Y) && !ellipse(22634.538000, 23718.553040, 1267.584036, 1267.584036, 0.000000, X, Y) && !ellipse(19830.112400, 23641.209600, 458.554413, 458.554413, 0.000000, X, Y) && !ellipse(21241.517000, 23414.180200, 1373.832040, 584.278417, 73.329700, X, Y) && !ellipse(22993.684174, 23090.669739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22177.610000, 22471.488000, 2201.960063, 2201.960063, 0.000000, X, Y) && !ellipse(22376.523800, 23733.218000, 1320.088038, 1320.088038, 0.000000, X, Y) && !ellipse(21498.582800, 26578.934000, 1408.816041, 1408.816041, 0.000000, X, Y) && !ellipse(19750.039400, 22976.487000, 606.613617, 606.613617, 0.000000, X, Y) && !ellipse(19144.798386, 27466.848328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19306.912000, 24107.366000, 948.232027, 948.232027, 0.000000, X, Y) && !ellipse(19287.514175, 25350.051880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19829.345400, 23742.998000, 1450.024042, 442.812813, 90.000000, X, Y) && !ellipse(21257.999924, 26189.341156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23151.708862, 23631.908081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21723.187600, 27157.144000, 1323.168038, 841.568024, 321.282000, X, Y)
[Sat Aug  4 18:35:55 2012] Writing fullrun_mos1_xmm0550671301_pi300-10000_pass1_cl_src25.gif
[Sat Aug  4 19:15:18 2012] Mean detx,y = (-898.57, 3061.80) 
[Sat Aug  4 19:15:19 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug  4 19:15:26 2012] Binned source spectrum to 10 counts/bin
[Sat Aug  4 19:15:26 2012] Setting source spectrum file to fullrun_mos1_xmm0550671301_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Aug  4 19:15:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550671301_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sun Aug  5 10:26:59 2012] Updating aperture counts using extracted products
[Sun Aug  5 10:26:59 2012] Error reading totcts from fullrun_mos1_xmm0550671301_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sun Aug  5 10:27:02 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug  5 10:27:02 2012] Using photon index=1.80, rate=0.00784, arf fullrun_mos1_xmm0550671301_pi300-10000_pass1_cl_src25.arf
[Sun Aug  5 10:27:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug  5 10:27:02 2012] Updating source flux to 8e-14
[Sun Aug  5 10:27:11 2012] Flag c found in src. 25 procflags, skipping spectral fitting