[Sat Aug 4 03:50:53 2012] Detection parameters: Position = (303.8, 303.0) = 18 52 32.54 0 41 59.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 79.1 +/- 16.5 Background counts = 71.7 Rate = 0.003 +/- 0.0007 [Sat Aug 4 03:50:54 2012] Off-axis axis estimate = 0.51' [Sat Aug 4 04:36:09 2012] Using EEF radius (= 6.69 ")to estimate initial spatial extent for simple fitting [Sat Aug 4 04:36:09 2012] Initial guess for spatial extent in simple fitting = 6.69" [Sat Aug 4 04:36:09 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.964 [Sat Aug 4 04:36:09 2012] Giving source the simple spatial ID 50 for pass 0, mean size = 6.69" [Sat Aug 4 06:38:47 2012] fullrun_mos1_xmm0550671301_pi300-10000_cl_pass0_src50.ximg exists [Sat Aug 4 06:38:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671301_pi300-10000_cl_pass0_src50.csv [Sat Aug 4 06:38:47 2012] fullrun_mos1_xmm0550671301_pi300-10000_cl_pass0_src50_1.ximg exists [Sat Aug 4 06:38:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671301_pi300-10000_cl_pass0_src50.csv [Sat Aug 4 06:38:47 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0550671301_pi300-10000_cl_pass0_src50_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0550671301_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Aug 4 06:38:48 2012] fullrun_mos1_xmm0550671301_pi300-10000_cl_pass0_tfrozen_src50.ximg exists [Sat Aug 4 06:38:48 2012] fullrun_mos1_xmm0550671301_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists [Sat Aug 4 06:38:48 2012] Fit fullrun_mos1_xmm0550671301_pi300-10000_cl_pass0_tfrozen_src50 appears to have run properly [Sat Aug 4 09:00:49 2012] Source 20 is offset by 1.806739 and 6.973539 pixels which is larger than 2 X fitted extent = 1.295563 x 1.295563, not incorporating fit results [Sat Aug 4 09:00:49 2012] Warning, spatial fit 50 centroid is now closest to src. 27 [Sat Aug 4 09:00:49 2012] Vigneting correction estimate = 1.000000 [Sat Aug 4 09:00:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Aug 4 09:00:49 2012] Assessing source extent using major [Sat Aug 4 09:00:49 2012] Source does appear to be extended [Sat Aug 4 09:00:49 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Aug 4 09:00:49 2012] Source is confused with source 27 [Sat Aug 4 09:31:29 2012] Using EEF radius (= 6.69 ")to estimate initial spatial extent for simple fitting [Sat Aug 4 09:31:29 2012] Initial guess for spatial extent in simple fitting = 6.69" [Sat Aug 4 09:31:29 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.964 [Sat Aug 4 09:31:29 2012] Giving source the simple spatial ID 47 for pass 1, mean size = 6.69" [Sat Aug 4 13:16:13 2012] fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_src47.ximg exists [Sat Aug 4 13:16:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_src47.csv [Sat Aug 4 13:16:13 2012] fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_src47_1.ximg exists [Sat Aug 4 13:16:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_src47.csv [Sat Aug 4 13:16:13 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_src47_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Aug 4 13:16:14 2012] fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_tfrozen_src47.ximg exists [Sat Aug 4 13:16:14 2012] fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists [Sat Aug 4 13:16:14 2012] Fit fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_tfrozen_src47 appears to have run properly [Sat Aug 4 17:00:37 2012] Source 20 is offset by 2.795337 and -5.946369 pixels which is larger than 2 X fitted extent = 1.619416 x 1.619416, not incorporating fit results [Sat Aug 4 17:00:37 2012] Spatial fit model total counts = 1314.270000, observed total counts = 1315.000000 [Sat Aug 4 17:00:37 2012] Offset between fit and detection position for source 20 = 6.057652 pixels [Sat Aug 4 17:00:37 2012] 1220.179000 total counts/ 1138.950000 bgd. counts: snr = 2.406904 Spatial fit parameters: Offset between fit and detection position for source 20 = 6.057652 pixels Position = (297.9, 302.1) = 18 52 34.28 0 41 56.3 Extent = 13.4 (13.3-26.7)", rotation angle = 0 Source counts = 81.2 +/- 34.9 Background counts = 1139.0 Rate = 0.003 +/- 0.001 [Sat Aug 4 17:00:37 2012] Vigneting correction estimate = 1.000000 [Sat Aug 4 17:00:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Aug 4 17:00:37 2012] Assessing source extent using major axis lower bound [Sat Aug 4 17:00:37 2012] Source does appear to be extended [Sat Aug 4 17:00:37 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Aug 4 18:35:55 2012] XMMSAS src. selection expression = ellipse(25864.688000, 26233.186600, 802.218023, 802.218023, 0.000000, X, Y) [Sat Aug 4 18:35:55 2012] Writing source region out to fullrun_mos1_xmm0550671301_pi300-10000_pass1_cl_src20_src.reg [Sat Aug 4 18:35:55 2012] Extracting stamp from image fullrun_mos1_xmm0550671301_pi300-10000_cl_sm2.00.img.gz, (252, 256) - (344, 348) [Sat Aug 4 18:35:55 2012] XMMSAS bgd. selection expression = annulus(25864.688000, 26233.186600, 1337.030038, 2674.060077, X, Y) && !ellipse(24585.614000, 24392.508000, 301.951209, 301.951209, 0.000000, X, Y) && !ellipse(25148.220000, 21747.270000, 2536.928073, 1565.808045, 144.408000, X, Y) && !ellipse(25746.058000, 23742.729800, 1184.176034, 1184.176034, 0.000000, X, Y) && !ellipse(26346.846000, 23257.746000, 2368.352068, 2368.352068, 0.000000, X, Y) && !ellipse(24792.380000, 24227.002000, 2341.408067, 2341.408067, 0.000000, X, Y) && !ellipse(24751.502000, 26868.583000, 1125.560032, 1125.560032, 0.000000, X, Y) && !ellipse(24036.962000, 23496.016000, 1269.376037, 1269.376037, 0.000000, X, Y) && !ellipse(25971.636000, 23593.138000, 1171.040034, 1171.040034, 0.000000, X, Y) && !ellipse(22634.538000, 23718.553040, 1267.584036, 1267.584036, 0.000000, X, Y) && !ellipse(27360.514600, 26636.068000, 1141.272033, 1141.272033, 0.000000, X, Y) && !ellipse(26002.070200, 24914.595000, 762.695222, 762.695222, 0.000000, X, Y) && !ellipse(27263.238400, 25643.075400, 1127.112032, 1127.112032, 0.000000, X, Y) && !ellipse(22993.684174, 23090.669739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26941.182400, 24293.722000, 1052.888030, 1052.888030, 0.000000, X, Y) && !ellipse(22177.610000, 22471.488000, 2201.960063, 2201.960063, 0.000000, X, Y) && !ellipse(27932.774000, 25458.576000, 1150.784033, 1150.784033, 0.000000, X, Y) && !ellipse(22376.523800, 23733.218000, 1320.088038, 1320.088038, 0.000000, X, Y) && !ellipse(26814.292600, 23621.692000, 1213.080035, 1213.080035, 0.000000, X, Y) && !ellipse(27209.554749, 27003.532440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28458.305800, 25101.300800, 756.891222, 756.891222, 0.000000, X, Y) && !ellipse(26881.332000, 25866.658000, 1075.472031, 1075.472031, 0.000000, X, Y) && !ellipse(28496.035600, 26154.925600, 1016.272029, 1016.272029, 0.000000, X, Y) && !ellipse(25404.829600, 25814.158000, 1091.312031, 1091.312031, 0.000000, X, Y) && !ellipse(27075.366913, 24536.057068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24776.000031, 24808.436523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23151.708862, 23631.908081, 870.000000, 870.000000, 0.000000, X, Y) [Sat Aug 4 18:35:55 2012] Writing fullrun_mos1_xmm0550671301_pi300-10000_pass1_cl_src20.gif [Sat Aug 4 19:16:31 2012] Mean detx,y = (-1671.86, -1265.61) [Sat Aug 4 19:16:32 2012] Setting backscal keywords in source and bgd. spectrum [Sat Aug 4 19:16:41 2012] Binned source spectrum to 10 counts/bin [Sat Aug 4 19:16:41 2012] Setting source spectrum file to fullrun_mos1_xmm0550671301_pi300-10000_pass1_cl_src20_src_b10.pi.gz [Sat Aug 4 19:16:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550671301_pi300-10000_pass1_cl_src20_bgd.pi.gz [Sun Aug 5 02:43:19 2012] Not generating rmf since there are only 81 counts [Sun Aug 5 02:43:19 2012] rmf not generated due to insufficient counts [Sun Aug 5 10:26:59 2012] Updating aperture counts using extracted products [Sun Aug 5 10:27:00 2012] Error reading totcts from fullrun_mos1_xmm0550671301_pi300-10000_pass1_cl_src20_src_b10.pi.gz [Sun Aug 5 10:27:03 2012] Calculating source flux in energy range 0.30-8.00 [Sun Aug 5 10:27:03 2012] Using photon index=1.80, rate=0.00305, arf fullrun_mos1_xmm0550671301_pi300-10000_pass1_cl_src20.arf [Sun Aug 5 10:27:03 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sun Aug 5 10:27:03 2012] Updating source flux to 3.1e-14 [Sun Aug 5 10:27:11 2012] Flag b found in src. 20 procflags, skipping spectral fitting [Sun Aug 5 10:27:11 2012] Flag c found in src. 20 procflags, skipping spectral fitting [Sun Aug 5 10:27:11 2012] Source 20 has fewer than 100.000000 counts, skipping spectral fitting