[Sat Aug  4 03:50:53 2012] Detection parameters:
  Position = (254.9, 183.1) = 18 52 46.74 0 33 19.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 699.3 +/- 32.4
  Background counts = 18.5
  Rate = 0.04 +/- 0.002

[Sat Aug  4 03:50:54 2012] Off-axis axis estimate = 8.94'
[Sat Aug  4 04:36:09 2012] Using EEF radius (= 10.90 ")to estimate initial spatial extent for simple fitting
[Sat Aug  4 04:36:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug  4 04:36:09 2012] Initial guess for spatial extent in simple fitting = 10.90"
[Sat Aug  4 04:36:09 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.997
[Sat Aug  4 04:36:09 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.90"
[Sat Aug  4 06:38:46 2012] fullrun_mos1_xmm0550671301_pi300-10000_cl_pass0_src1.ximg exists
[Sat Aug  4 06:38:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671301_pi300-10000_cl_pass0_src1.csv
[Sat Aug  4 06:38:46 2012] fullrun_mos1_xmm0550671301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Aug  4 06:38:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671301_pi300-10000_cl_pass0_src1.csv
[Sat Aug  4 06:38:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550671301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550671301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 06:38:47 2012] fullrun_mos1_xmm0550671301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Aug  4 06:38:47 2012] fullrun_mos1_xmm0550671301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Aug  4 06:38:47 2012] Fit fullrun_mos1_xmm0550671301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Aug  4 09:00:49 2012] Spatial fit model total counts = 999.693000, observed total counts = 1000.000000
[Sat Aug  4 09:00:49 2012] Offset between fit and detection position for source 1 = 0.217743 pixels
[Sat Aug  4 09:00:49 2012] 999.434000 total counts/ 445.118000 bgd. counts: snr = 26.273615
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.217743 pixels
  Position = (254.7, 183.3) = 18 52 46.78 0 33 19.6
  Extent = 6.7 (6.1-7.1)", rotation angle = 0
  Source counts = 554.3 +/- 31.6
  Background counts = 445.1
  Rate = 0.02 +/- 0.001
[Sat Aug  4 09:00:49 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 09:00:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 09:00:49 2012] Assessing source extent using major axis lower bound
[Sat Aug  4 09:00:49 2012] Source does appear to be extended
[Sat Aug  4 09:00:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 09:31:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug  4 09:31:29 2012] Initial guess for spatial extent in simple fitting = 6.69"
[Sat Aug  4 09:31:29 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.964
[Sat Aug  4 09:31:29 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.69"
[Sat Aug  4 13:16:11 2012] fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_src1.ximg exists
[Sat Aug  4 13:16:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_src1.csv
[Sat Aug  4 13:16:11 2012] fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Aug  4 13:16:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_src1.csv
[Sat Aug  4 13:16:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 13:16:13 2012] fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Aug  4 13:16:13 2012] fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Aug  4 13:16:13 2012] Fit fullrun_mos1_xmm0550671301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Aug  4 17:00:37 2012] Warning, spatial fit 1 centroid is now closest to src. 9
[Sat Aug  4 17:00:37 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 17:00:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 17:00:37 2012] Assessing source extent using major axis lower bound
[Sat Aug  4 17:00:37 2012] Source does appear to be extended
[Sat Aug  4 17:00:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 18:35:53 2012] XMMSAS src. selection expression = ellipse(22114.316600, 15898.693000, 401.265612, 401.265612, 0.000000, X, Y)
[Sat Aug  4 18:35:53 2012] Writing source region out to fullrun_mos1_xmm0550671301_pi300-10000_pass1_cl_src1_src.reg
[Sat Aug  4 18:35:53 2012] Extracting stamp from image fullrun_mos1_xmm0550671301_pi300-10000_cl_sm2.00.img.gz, (232, 160) - (278, 206)
[Sat Aug  4 18:35:53 2012] XMMSAS bgd. selection expression = annulus(22114.316600, 15898.693000, 668.776019, 1337.552038, X, Y)
[Sat Aug  4 18:35:53 2012] Writing fullrun_mos1_xmm0550671301_pi300-10000_pass1_cl_src1.gif
[Sat Aug  4 18:35:58 2012] Mean detx,y = (8959.03, 1344.88) 
[Sat Aug  4 18:35:58 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug  4 18:36:06 2012] Binned source spectrum to 10 counts/bin
[Sat Aug  4 18:36:06 2012] Setting source spectrum file to fullrun_mos1_xmm0550671301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Aug  4 18:36:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550671301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Aug  5 10:26:57 2012] Updating aperture counts using extracted products
[Sun Aug  5 10:26:57 2012] Error reading totcts from fullrun_mos1_xmm0550671301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug  5 10:27:00 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug  5 10:27:00 2012] Using photon index=1.80, rate=0.0208, arf fullrun_mos1_xmm0550671301_pi300-10000_pass1_cl_src1.arf
[Sun Aug  5 10:27:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug  5 10:27:00 2012] Updating source flux to 3.5e-13
[Sun Aug  5 10:37:31 2012] Reading fit data from xmm0550671301/analysis//spectral/fullrun_mos1_xmm0550671301_pi300-10000_pass1_cl_src1_pl.csv
[Sun Aug  5 10:37:31 2012] Spectral fit parameter nH value = 2.77915e+22
[Sun Aug  5 10:37:31 2012] Spectral fit parameter PhoIndex value = 3.37679
[Sun Aug  5 10:37:31 2012] Failed to get F(0.3-8.0) from xmm0550671301/analysis//spectral/fullrun_mos1_xmm0550671301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Aug  5 10:37:31 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug  5 10:37:31 2012] Using Nh = 2.8e+22, photon index=3.38, rate=0.0208, arf fullrun_mos1_xmm0550671301_pi300-10000_pass1_cl_src1.arf
[Sun Aug  5 10:37:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug  5 10:37:32 2012] Updating source flux to 5.1e-13