[Sun Jul 21 02:27:18 2013] Detection parameters:
  Position = (257.9, 274.2) = 18 52 46.38 0 39 57.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 458.4 +/- 38.7
  Background counts = 381.1
  Rate = 0.03 +/- 0.002

[Sun Jul 21 02:27:18 2013] Off-axis axis estimate = 3.43'
[Sun Jul 21 02:32:49 2013] Using EEF radius (= 8.14 ")to estimate initial spatial extent for simple fitting
[Sun Jul 21 02:32:49 2013] Initial guess for spatial extent in simple fitting = 8.14"
[Sun Jul 21 02:32:49 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.889
[Sun Jul 21 02:32:49 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 8.14"
[Sun Jul 21 02:54:05 2013] fullrun_pn_xmm0550671201_pi300-10000_cl_pass0_src10.ximg exists
[Sun Jul 21 02:54:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550671201_pi300-10000_cl_pass0_src10.csv
[Sun Jul 21 02:54:05 2013] fullrun_pn_xmm0550671201_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun Jul 21 02:54:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550671201_pi300-10000_cl_pass0_src10.csv
[Sun Jul 21 02:54:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550671201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550671201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 21 02:54:05 2013] fullrun_pn_xmm0550671201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun Jul 21 02:54:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550671201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun Jul 21 02:54:05 2013] fullrun_pn_xmm0550671201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Jul 21 02:54:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550671201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun Jul 21 02:54:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550671201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550671201_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 21 06:37:15 2013] Warning, spatial fit 10 centroid is now closest to src. 9
[Sun Jul 21 06:37:15 2013] Vigneting correction estimate = 1.000000
[Sun Jul 21 06:37:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 21 06:37:15 2013] Assessing source extent using major
[Sun Jul 21 06:37:15 2013] Source does appear to be extended
[Sun Jul 21 06:37:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 21 06:37:40 2013] Using EEF radius (= 8.14 ")to estimate initial spatial extent for simple fitting
[Sun Jul 21 06:37:40 2013] Initial guess for spatial extent in simple fitting = 8.14"
[Sun Jul 21 06:37:40 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.889
[Sun Jul 21 06:37:40 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 8.14"
[Sun Jul 21 07:00:55 2013] fullrun_pn_xmm0550671201_pi300-10000_cl_pass1_src10.ximg exists
[Sun Jul 21 07:00:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550671201_pi300-10000_cl_pass1_src10.csv
[Sun Jul 21 07:00:55 2013] fullrun_pn_xmm0550671201_pi300-10000_cl_pass1_src10_1.ximg exists
[Sun Jul 21 07:00:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550671201_pi300-10000_cl_pass1_src10.csv
[Sun Jul 21 07:00:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550671201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550671201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 21 07:00:55 2013] fullrun_pn_xmm0550671201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sun Jul 21 07:00:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550671201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sun Jul 21 07:00:55 2013] fullrun_pn_xmm0550671201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Jul 21 07:00:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550671201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sun Jul 21 07:00:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550671201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550671201_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 21 11:05:04 2013] Source 10 is offset by 0.136535 and -6.549246 pixels which is larger than
2 X fitted extent = 2.536901 x 0.935457, not incorporating fit results
[Sun Jul 21 11:05:04 2013] Source 10 is offset by 7.359041 and 6.688478 pixels which is larger than
2 X fitted extent = 0.935802 x 0.935802, not incorporating fit results
[Sun Jul 21 11:05:04 2013] Vigneting correction estimate = 1.000000
[Sun Jul 21 11:05:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 21 11:05:04 2013] Assessing source extent using major
[Sun Jul 21 11:05:04 2013] Source does appear to be extended
[Sun Jul 21 11:05:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 21 11:05:28 2013] XMMSAS src. selection expression = ellipse(22386.420563, 23807.081604, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jul 21 11:05:28 2013] Writing source region out to fullrun_pn_xmm0550671201_pi300-10000_pass1_cl_src10_src.reg
[Sun Jul 21 11:05:28 2013] Extracting stamp from image fullrun_pn_xmm0550671201_pi300-10000_cl_sm2.00.img.gz, (220, 237) - (295, 312)
[Sun Jul 21 11:05:28 2013] XMMSAS bgd. selection expression = annulus(22386.420563, 23807.081604, 1087.500000, 2175.000000, X, Y) && !ellipse(24715.427600, 24198.005000, 415.626412, 415.626412, 0.000000, X, Y) && !ellipse(24942.614000, 26688.128000, 1783.448051, 669.216819, 42.577100, X, Y) && !ellipse(25542.380400, 26081.524000, 1068.520031, 714.931221, 57.506900, X, Y) && !ellipse(25133.852000, 25082.240000, 1068.520031, 1068.520031, 0.000000, X, Y) && !ellipse(22112.599426, 25329.419647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21934.190750, 24920.417694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23608.339386, 23749.637390, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 21 11:05:28 2013] Writing fullrun_pn_xmm0550671201_pi300-10000_pass1_cl_src10.gif
[Sun Jul 21 11:34:59 2013] Mean detx,y = (2428.43, -581.35) 
[Sun Jul 21 11:35:05 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 21 11:35:12 2013] Binned source spectrum to 10 counts/bin
[Sun Jul 21 11:35:13 2013] Setting source spectrum file to fullrun_pn_xmm0550671201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Jul 21 11:35:13 2013] Setting bgd. spectrum file to fullrun_pn_xmm0550671201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun Jul 21 11:54:19 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 21 11:54:19 2013] rmf not generated due to insufficient counts
[Sun Jul 21 17:14:37 2013] Updating aperture counts using extracted products
[Sun Jul 21 17:14:37 2013] Total counts from fullrun_pn_xmm0550671201_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 3338.00
[Sun Jul 21 17:14:37 2013] Total counts from fullrun_pn_xmm0550671201_pi300-10000_pass1_cl_src10_bgd.pi.gz = 2142.00
[Sun Jul 21 17:14:37 2013] Got source and background scale factors 1005236.000000, 1267259.000000
[Sun Jul 21 17:14:37 2013] User source parameters:
  Position = (257.9, 274.2) = 18 52 46.38 0 39 57.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1638.9 +/- 58.8
  Background aperture counts = 1699.1
  Rate = 0.06 +/- 0.002

[Sun Jul 21 17:14:37 2013] Updating counts from extracted products
[Sun Jul 21 17:14:37 2013] Set source signif. to 1638.89/41.22 = 39.76
[Sun Jul 21 17:14:38 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jul 21 17:14:38 2013] Using photon index=1.80, rate=0.06, arf fullrun_pn_xmm0550671201_pi300-10000_pass1_cl_src10.arf
[Sun Jul 21 17:14:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 21 17:14:38 2013] Updating source flux to 4.1e-13
[Sun Jul 21 17:15:20 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jul 21 17:15:22 2013] xmm0550671201/analysis//spectral/fullrun_pn_xmm0550671201_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete