[Sun Jul 21 02:27:57 2013] Detection parameters:
  Position = (273.4, 241.1) = 18 52 41.87 0 37 34.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 339.0 +/- 26.0
  Background counts = 98.9
  Rate = 0.02 +/- 0.001

[Sun Jul 21 02:27:58 2013] Off-axis axis estimate = 4.53'
[Sun Jul 21 04:39:33 2013] Using EEF radius (= 8.69 ")to estimate initial spatial extent for simple fitting
[Sun Jul 21 04:39:33 2013] Initial guess for spatial extent in simple fitting = 8.69"
[Sun Jul 21 04:39:33 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.801
[Sun Jul 21 04:39:33 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 8.69"
[Sun Jul 21 06:37:11 2013] fullrun_mos2_xmm0550671201_pi300-10000_cl_pass0_src8.ximg exists
[Sun Jul 21 06:37:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671201_pi300-10000_cl_pass0_src8.csv
[Sun Jul 21 06:37:11 2013] fullrun_mos2_xmm0550671201_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun Jul 21 06:37:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671201_pi300-10000_cl_pass0_src8.csv
[Sun Jul 21 06:37:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671201_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671201_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 21 06:37:11 2013] fullrun_mos2_xmm0550671201_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun Jul 21 06:37:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun Jul 21 06:37:11 2013] fullrun_mos2_xmm0550671201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun Jul 21 06:37:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun Jul 21 06:37:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671201_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 21 06:37:31 2013] Spatial fit model total counts = 2556.810000, observed total counts = 2145.000000
[Sun Jul 21 06:37:31 2013] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jul 21 06:37:31 2013] Vigneting correction estimate = 1.000000
[Sun Jul 21 06:37:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 21 06:37:31 2013] Assessing source extent using major
[Sun Jul 21 06:37:31 2013] Source does appear to be extended
[Sun Jul 21 06:37:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 21 08:57:44 2013] Using EEF radius (= 8.69 ")to estimate initial spatial extent for simple fitting
[Sun Jul 21 08:57:44 2013] Initial guess for spatial extent in simple fitting = 8.69"
[Sun Jul 21 08:57:44 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.801
[Sun Jul 21 08:57:44 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 8.69"
[Sun Jul 21 11:05:00 2013] fullrun_mos2_xmm0550671201_pi300-10000_cl_pass1_src8.ximg exists
[Sun Jul 21 11:05:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671201_pi300-10000_cl_pass1_src8.csv
[Sun Jul 21 11:05:00 2013] fullrun_mos2_xmm0550671201_pi300-10000_cl_pass1_src8_1.ximg exists
[Sun Jul 21 11:05:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671201_pi300-10000_cl_pass1_src8.csv
[Sun Jul 21 11:05:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671201_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671201_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 21 11:05:00 2013] fullrun_mos2_xmm0550671201_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sun Jul 21 11:05:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671201_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sun Jul 21 11:05:00 2013] fullrun_mos2_xmm0550671201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sun Jul 21 11:05:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671201_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sun Jul 21 11:05:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671201_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 21 11:05:19 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 56.614115 pixels away
[Sun Jul 21 11:05:19 2013] Spatial fit model total counts = 2550.540000, observed total counts = 2145.000000
[Sun Jul 21 11:05:19 2013] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jul 21 11:05:19 2013] Vigneting correction estimate = 1.000000
[Sun Jul 21 11:05:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 21 11:05:19 2013] Assessing source extent using major
[Sun Jul 21 11:05:19 2013] Source does appear to be extended
[Sun Jul 21 11:05:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 21 11:05:19 2013] Source is confused with source 7
[Sun Jul 21 14:02:03 2013] XMMSAS src. selection expression = ellipse(23739.455353, 20931.443268, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jul 21 14:02:03 2013] Writing source region out to fullrun_mos2_xmm0550671201_pi300-10000_pass1_cl_src6_src.reg
[Sun Jul 21 14:02:03 2013] Extracting stamp from image fullrun_mos2_xmm0550671201_pi300-10000_cl_sm2.00.img.gz, (236, 204) - (311, 279)
[Sun Jul 21 14:02:03 2013] XMMSAS bgd. selection expression = annulus(23739.455353, 20931.443268, 1087.500000, 2175.000000, X, Y) && !ellipse(24929.910600, 21335.656000, 2150.152062, 1009.440029, 147.311000, X, Y) && !ellipse(26006.858800, 22253.947400, 1274.736037, 815.880023, 331.706500, X, Y) && !ellipse(22544.175600, 21950.157760, 1374.336040, 624.551218, 47.047900, X, Y) && !ellipse(22827.262400, 22173.926000, 1329.912038, 1329.912038, 0.000000, X, Y) && !ellipse(22058.244000, 22522.552000, 1194.576034, 1194.576034, 0.000000, X, Y) && !ellipse(26204.940000, 22299.128000, 1251.488036, 858.680025, 329.761300, X, Y) && !ellipse(23021.470000, 21575.818000, 2659.824077, 974.208028, 38.364900, X, Y) && !ellipse(25841.942000, 23650.218000, 1148.560033, 524.961615, 34.166400, X, Y) && !ellipse(22113.262000, 22625.768000, 2748.256079, 1784.512051, 13.787500, X, Y) && !ellipse(21592.744000, 23064.306000, 1975.648057, 920.944026, 65.767800, X, Y) && !ellipse(23585.030884, 22745.072540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26866.114000, 22818.890000, 2110.168061, 2110.168061, 0.000000, X, Y) && !ellipse(21343.408200, 23369.312000, 1378.960040, 586.002417, 69.945600, X, Y) && !ellipse(22433.895800, 23342.530200, 1135.224033, 1135.224033, 0.000000, X, Y) && !ellipse(27034.520000, 23727.734000, 1174.992034, 1174.992034, 0.000000, X, Y) && !ellipse(22073.252000, 20692.083600, 1880.520054, 945.768027, 344.278100, X, Y)
[Sun Jul 21 14:02:03 2013] Writing fullrun_mos2_xmm0550671201_pi300-10000_pass1_cl_src6.gif
[Sun Jul 21 14:08:59 2013] Mean detx,y = (-895.20, 3381.94) 
[Sun Jul 21 14:08:59 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 21 14:09:06 2013] Binned source spectrum to 10 counts/bin
[Sun Jul 21 14:09:06 2013] Setting source spectrum file to fullrun_mos2_xmm0550671201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jul 21 14:09:06 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0550671201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun Jul 21 14:52:18 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 21 14:52:18 2013] rmf not generated due to insufficient counts
[Sun Jul 21 17:14:45 2013] Updating aperture counts using extracted products
[Sun Jul 21 17:14:45 2013] Total counts from fullrun_mos2_xmm0550671201_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 1512.00
[Sun Jul 21 17:14:45 2013] Total counts from fullrun_mos2_xmm0550671201_pi300-10000_pass1_cl_src6_bgd.pi.gz = 574.00
[Sun Jul 21 17:14:45 2013] Got source and background scale factors 1128404.000000, 2790324.000000
[Sun Jul 21 17:14:45 2013] User source parameters:
  Position = (273.4, 241.1) = 18 52 41.87 0 37 34.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1279.9 +/- 39.9
  Background aperture counts = 232.1
  Rate = 0.05 +/- 0.001

[Sun Jul 21 17:14:45 2013] Updating counts from extracted products
[Sun Jul 21 17:14:45 2013] Set source signif. to 1279.88/15.24 = 84.01
[Sun Jul 21 17:14:50 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jul 21 17:14:50 2013] Using photon index=1.80, rate=0.0471, arf fullrun_mos2_xmm0550671201_pi300-10000_pass1_cl_src6.arf
[Sun Jul 21 17:14:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 21 17:14:50 2013] Updating source flux to 1.1e-12
[Sun Jul 21 17:15:06 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jul 21 17:15:20 2013] xmm0550671201/analysis//spectral/fullrun_mos2_xmm0550671201_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete