[Sun Jul 21 02:27:58 2013] Detection parameters:
  Position = (271.6, 262.0) = 18 52 42.39 0 39 5.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 244.6 +/- 27.1
  Background counts = 165.1
  Rate = 0.01 +/- 0.001

[Sun Jul 21 02:27:58 2013] Off-axis axis estimate = 3.28'
[Sun Jul 21 04:39:33 2013] Using EEF radius (= 8.07 ")to estimate initial spatial extent for simple fitting
[Sun Jul 21 04:39:33 2013] Initial guess for spatial extent in simple fitting = 8.07"
[Sun Jul 21 04:39:33 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.902
[Sun Jul 21 04:39:33 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 8.07"
[Sun Jul 21 06:37:11 2013] fullrun_mos2_xmm0550671201_pi300-10000_cl_pass0_src19.ximg exists
[Sun Jul 21 06:37:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671201_pi300-10000_cl_pass0_src19.csv
[Sun Jul 21 06:37:11 2013] fullrun_mos2_xmm0550671201_pi300-10000_cl_pass0_src19_1.ximg exists
[Sun Jul 21 06:37:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671201_pi300-10000_cl_pass0_src19.csv
[Sun Jul 21 06:37:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671201_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671201_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 21 06:37:12 2013] fullrun_mos2_xmm0550671201_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sun Jul 21 06:37:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671201_pi300-10000_cl_pass0_tfrozen_src19.csv
[Sun Jul 21 06:37:12 2013] fullrun_mos2_xmm0550671201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sun Jul 21 06:37:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671201_pi300-10000_cl_pass0_tfrozen_src19.csv
[Sun Jul 21 06:37:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671201_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 21 06:37:31 2013] Warning, spatial fit 19 centroid is now closest to src. 48
[Sun Jul 21 06:37:31 2013] Vigneting correction estimate = 1.000000
[Sun Jul 21 06:37:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 21 06:37:31 2013] Assessing source extent using major
[Sun Jul 21 06:37:31 2013] Source does appear to be extended
[Sun Jul 21 06:37:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 21 06:37:31 2013] Source is confused with source 3
[Sun Jul 21 08:57:44 2013] Using EEF radius (= 8.07 ")to estimate initial spatial extent for simple fitting
[Sun Jul 21 08:57:44 2013] Initial guess for spatial extent in simple fitting = 8.07"
[Sun Jul 21 08:57:44 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.902
[Sun Jul 21 08:57:44 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 8.07"
[Sun Jul 21 11:05:00 2013] fullrun_mos2_xmm0550671201_pi300-10000_cl_pass1_src19.ximg exists
[Sun Jul 21 11:05:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671201_pi300-10000_cl_pass1_src19.csv
[Sun Jul 21 11:05:00 2013] fullrun_mos2_xmm0550671201_pi300-10000_cl_pass1_src19_1.ximg exists
[Sun Jul 21 11:05:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671201_pi300-10000_cl_pass1_src19.csv
[Sun Jul 21 11:05:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671201_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671201_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 21 11:05:01 2013] fullrun_mos2_xmm0550671201_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sun Jul 21 11:05:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671201_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sun Jul 21 11:05:01 2013] fullrun_mos2_xmm0550671201_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sun Jul 21 11:05:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671201_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sun Jul 21 11:05:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671201_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671201_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 21 11:05:19 2013] Warning, spatial fit 19 centroid is now closest to src. 3
[Sun Jul 21 11:05:19 2013] Vigneting correction estimate = 1.000000
[Sun Jul 21 11:05:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 21 11:05:19 2013] Assessing source extent using major
[Sun Jul 21 11:05:19 2013] Source does appear to be extended
[Sun Jul 21 11:05:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 21 14:02:04 2013] XMMSAS src. selection expression = ellipse(23585.030884, 22745.072540, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jul 21 14:02:04 2013] Writing source region out to fullrun_mos2_xmm0550671201_pi300-10000_pass1_cl_src46_src.reg
[Sun Jul 21 14:02:04 2013] Extracting stamp from image fullrun_mos2_xmm0550671201_pi300-10000_cl_sm2.00.img.gz, (234, 224) - (309, 299)
[Sun Jul 21 14:02:04 2013] XMMSAS bgd. selection expression = annulus(23585.030884, 22745.072540, 1087.500000, 2175.000000, X, Y) && !ellipse(24864.018000, 24230.713400, 915.720026, 314.222409, 352.407030, X, Y) && !ellipse(24929.910600, 21335.656000, 2150.152062, 1009.440029, 147.311000, X, Y) && !ellipse(26006.858800, 22253.947400, 1274.736037, 815.880023, 331.706500, X, Y) && !ellipse(22544.175600, 21950.157760, 1374.336040, 624.551218, 47.047900, X, Y) && !ellipse(22827.262400, 22173.926000, 1329.912038, 1329.912038, 0.000000, X, Y) && !ellipse(22058.244000, 22522.552000, 1194.576034, 1194.576034, 0.000000, X, Y) && !ellipse(23739.455353, 20931.443268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26204.940000, 22299.128000, 1251.488036, 858.680025, 329.761300, X, Y) && !ellipse(23021.470000, 21575.818000, 2659.824077, 974.208028, 38.364900, X, Y) && !ellipse(25841.942000, 23650.218000, 1148.560033, 524.961615, 34.166400, X, Y) && !ellipse(22113.262000, 22625.768000, 2748.256079, 1784.512051, 13.787500, X, Y) && !ellipse(21592.744000, 23064.306000, 1975.648057, 920.944026, 65.767800, X, Y) && !ellipse(25442.237152, 24048.681305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26866.114000, 22818.890000, 2110.168061, 2110.168061, 0.000000, X, Y) && !ellipse(26095.999600, 24748.842600, 755.040822, 349.977610, 10.204600, X, Y) && !ellipse(21343.408200, 23369.312000, 1378.960040, 586.002417, 69.945600, X, Y) && !ellipse(22433.895800, 23342.530200, 1135.224033, 1135.224033, 0.000000, X, Y) && !ellipse(21653.398200, 24798.426000, 1321.480038, 745.314421, 96.276820, X, Y) && !ellipse(19968.809200, 23346.562000, 1473.888042, 448.971213, 98.122640, X, Y) && !ellipse(21634.259200, 26427.326800, 2105.960061, 794.599223, 101.667000, X, Y) && !ellipse(26225.107056, 24142.454285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24714.072000, 26712.092000, 1908.632055, 874.016025, 0.000000, X, Y) && !ellipse(26205.032600, 24882.770800, 1105.016032, 1105.016032, 0.000000, X, Y) && !ellipse(22073.252000, 20692.083600, 1880.520054, 945.768027, 344.278100, X, Y)
[Sun Jul 21 14:02:04 2013] Writing fullrun_mos2_xmm0550671201_pi300-10000_pass1_cl_src46.gif
[Sun Jul 21 14:17:22 2013] Mean detx,y = (-1135.50, 1619.04) 
[Sun Jul 21 14:17:23 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 21 14:17:29 2013] Binned source spectrum to 10 counts/bin
[Sun Jul 21 14:17:29 2013] Setting source spectrum file to fullrun_mos2_xmm0550671201_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Sun Jul 21 14:17:29 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0550671201_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Sun Jul 21 15:16:47 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 21 15:16:47 2013] rmf not generated due to insufficient counts
[Sun Jul 21 17:14:46 2013] Updating aperture counts using extracted products
[Sun Jul 21 17:14:46 2013] Total counts from fullrun_mos2_xmm0550671201_pi300-10000_pass1_cl_src46_src_b10.pi.gz = 1832.00
[Sun Jul 21 17:14:46 2013] Total counts from fullrun_mos2_xmm0550671201_pi300-10000_pass1_cl_src46_bgd.pi.gz = 567.00
[Sun Jul 21 17:14:46 2013] Got source and background scale factors 1197536.000000, 828172.000000
[Sun Jul 21 17:14:46 2013] User source parameters:
  Position = (271.6, 262.0) = 18 52 42.39 0 39 5.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1012.1 +/- 43.8
  Background aperture counts = 819.9
  Rate = 0.04 +/- 0.002

[Sun Jul 21 17:14:46 2013] Updating counts from extracted products
[Sun Jul 21 17:14:46 2013] Set source signif. to 1012.12/28.63 = 35.35
[Sun Jul 21 17:14:50 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jul 21 17:14:50 2013] Using photon index=1.80, rate=0.0372, arf fullrun_mos2_xmm0550671201_pi300-10000_pass1_cl_src46.arf
[Sun Jul 21 17:14:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 21 17:14:50 2013] Updating source flux to 7.1e-13
[Sun Jul 21 17:15:06 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jul 21 17:15:20 2013] xmm0550671201/analysis//spectral/fullrun_mos2_xmm0550671201_pi300-10000_pass1_cl_src46_pl.csv not found, spectral fit skipped or did not complete