[Sat Jul  7 14:41:03 2012] Detection parameters:
  Position = (290.9, 249.0) = 18 52 36.57 0 38 6.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 360.1 +/- 27.8
  Background counts = 74.3
  Rate = 0.02 +/- 0.002

[Sat Jul  7 14:41:04 2012] Off-axis axis estimate = 3.63'
[Sat Jul  7 18:01:01 2012] Using EEF radius (= 8.24 ")to estimate initial spatial extent for simple fitting
[Sat Jul  7 18:01:01 2012] Initial guess for spatial extent in simple fitting = 8.24"
[Sat Jul  7 18:01:01 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.698
[Sat Jul  7 18:01:01 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 8.24"
[Sat Jul  7 20:07:19 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src6.ximg exists
[Sat Jul  7 20:07:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src6.csv
[Sat Jul  7 20:07:19 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Jul  7 20:07:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src6.csv
[Sat Jul  7 20:07:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul  7 20:07:20 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Jul  7 20:07:20 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Jul  7 20:07:20 2012] Fit fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sat Jul  7 20:07:42 2012] Spatial fit model total counts = 1974.970000, observed total counts = 1789.000000
[Sat Jul  7 20:07:42 2012] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jul  7 20:07:42 2012] Warning, spatial fit 6 centroid is now closest to src. 7
[Sat Jul  7 20:07:42 2012] Vigneting correction estimate = 1.000000
[Sat Jul  7 20:07:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul  7 20:07:42 2012] Assessing source extent using major
[Sat Jul  7 20:07:42 2012] Source does appear to be extended
[Sat Jul  7 20:07:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul  7 20:07:42 2012] Source is confused with source 5
[Sat Jul  7 23:28:03 2012] Using EEF radius (= 8.24 ")to estimate initial spatial extent for simple fitting
[Sat Jul  7 23:28:03 2012] Initial guess for spatial extent in simple fitting = 8.24"
[Sat Jul  7 23:28:03 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.698
[Sat Jul  7 23:28:03 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 8.24"
[Sun Jul  8 01:55:33 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src6.ximg exists
[Sun Jul  8 01:55:33 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun Jul  8 01:55:33 2012] Fit fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src6 appears to have run properly
[Sun Jul  8 01:55:34 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun Jul  8 01:55:34 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Jul  8 01:55:34 2012] Fit fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sun Jul  8 01:55:55 2012] Spatial fit model total counts = 3399.390000, observed total counts = 3161.000000
[Sun Jul  8 01:55:55 2012] Offset between fit and detection position for source 8 = 2.181332 pixels
[Sun Jul  8 01:55:55 2012] Warning, changing simple spatial fit ID from 6 to 4
[Sun Jul  8 01:55:55 2012] 3444.730000 total counts/ 2259.430000 bgd. counts: snr = 24.936118
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 2.181332 pixels
  Position = (289.0, 248.0) = 18 52 37.14 0 38 1.6
  Extent = 33.0 (31.9-65.9)" x 14.6 (12.7-16.1)", rotation angle = 152 (147-157) degrees
  Source counts = 1185.3 +/- 58.7
  Background counts = 2259.4
  Rate = 0.06 +/- 0.003
[Sun Jul  8 01:55:55 2012] Spatial fit model total counts = 2271.880000, observed total counts = 2273.000000
[Sun Jul  8 01:55:55 2012] Offset between fit and detection position for source 8 = 1.209362 pixels
[Sun Jul  8 01:55:55 2012] Warning, changing simple spatial fit ID from 4 to 6
[Sun Jul  8 01:55:55 2012] 2278.817000 total counts/ 1534.940000 bgd. counts: snr = 18.986960
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 1.209362 pixels
  Position = (288.5, 246.9) = 18 52 37.28 0 37 56.7
  Extent = 16.5 (16.4-33.0)", rotation angle = 0
  Source counts = 743.9 +/- 47.7
  Background counts = 1534.9
  Rate = 0.04 +/- 0.003
[Sun Jul  8 01:55:55 2012] Vigneting correction estimate = 1.000000
[Sun Jul  8 01:55:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul  8 01:55:55 2012] Assessing source extent using major axis lower bound
[Sun Jul  8 01:55:55 2012] Source does appear to be extended
[Sun Jul  8 01:55:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul  8 09:19:27 2012] XMMSAS src. selection expression = ellipse(25049.692000, 21429.978000, 989.010028, 989.010028, 0.000000, X, Y)
[Sun Jul  8 09:19:27 2012] Writing source region out to fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src8_src.reg
[Sun Jul  8 09:19:27 2012] Extracting stamp from image fullrun_mos2_xmm0550671101_pi300-10000_cl_sm2.00.img.gz, (232, 190) - (345, 304)
[Sun Jul  8 09:19:27 2012] XMMSAS bgd. selection expression = annulus(25049.692000, 21429.978000, 1648.350047, 3296.700095, X, Y) && !ellipse(24678.442000, 24267.241800, 303.646409, 303.646409, 0.000000, X, Y) && !ellipse(25753.386000, 22052.692600, 1280.504037, 1280.504037, 0.000000, X, Y) && !ellipse(24826.604000, 21283.794000, 1318.680038, 1318.680038, 0.000000, X, Y) && !ellipse(26041.598000, 22254.338000, 915.000026, 915.000026, 0.000000, X, Y) && !ellipse(22994.021362, 22043.044296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21697.202000, 22886.388000, 1393.304040, 1393.304040, 0.000000, X, Y) && !ellipse(25196.678000, 24045.318000, 2353.312068, 1052.576030, 28.121100, X, Y) && !ellipse(23492.200439, 21011.967651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23746.615967, 22920.086761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22343.191400, 23856.168000, 1206.512035, 1206.512035, 0.000000, X, Y) && !ellipse(24858.871460, 22103.576309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26538.586000, 22638.160000, 1627.896047, 1627.896047, 0.000000, X, Y) && !ellipse(26145.638000, 23393.708000, 1176.656034, 1176.656034, 0.000000, X, Y) && !ellipse(26827.684600, 23592.794600, 907.232026, 907.232026, 0.000000, X, Y) && !ellipse(27761.189600, 25370.112000, 1151.976033, 1151.976033, 0.000000, X, Y) && !ellipse(25238.139740, 24898.970367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21614.677732, 24816.018200, 878.224025, 878.224025, 0.000000, X, Y) && !ellipse(26254.110000, 24743.668000, 1148.680033, 1148.680033, 0.000000, X, Y) && !ellipse(21387.634384, 22832.842499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21343.499832, 23266.740662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27306.592000, 24328.604400, 1148.680033, 1148.680033, 0.000000, X, Y) && !ellipse(25019.260000, 26682.914000, 2096.784060, 621.151218, 46.082000, X, Y) && !ellipse(24192.946000, 22869.574000, 1292.280037, 1292.280037, 0.000000, X, Y) && !ellipse(26556.976000, 25149.257400, 2194.816063, 2194.816063, 0.000000, X, Y) && !ellipse(23639.671387, 23700.267120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23108.054871, 23736.271973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21198.337380, 20884.401400, 632.898418, 632.898418, 0.000000, X, Y) && !ellipse(28235.928009, 24934.008789, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul  8 09:19:27 2012] Writing fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src8.gif
[Sun Jul  8 09:20:19 2012] Mean detx,y = (490.21, 2775.95) 
[Sun Jul  8 09:20:20 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul  8 09:20:27 2012] Binned source spectrum to 10 counts/bin
[Sun Jul  8 09:20:27 2012] Setting source spectrum file to fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Jul  8 09:20:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sun Jul  8 11:37:48 2012] Updating aperture counts using extracted products
[Sun Jul  8 11:37:48 2012] Error reading totcts from fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Jul  8 11:37:49 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul  8 11:37:49 2012] Using photon index=1.80, rate=0.0398, arf fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src8.arf
[Sun Jul  8 11:37:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul  8 11:37:49 2012] Updating source flux to 4.7e-13
[Sun Jul  8 11:45:10 2012] Flag p found in src. 8 procflags, skipping spectral fitting
[Sun Jul  8 11:45:10 2012] Flag c found in src. 8 procflags, skipping spectral fitting