[Sat Jul  7 14:41:04 2012] Detection parameters:
  Position = (215.6, 127.3) = 18 52 58.42 0 29 17.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.0 +/- 13.5
  Background counts = 19.9
  Rate = 0.005 +/- 0.0007

[Sat Jul  7 14:41:04 2012] Off-axis axis estimate = 13.79'
[Sat Jul  7 18:01:01 2012] Using EEF radius (= 13.32 ")to estimate initial spatial extent for simple fitting
[Sat Jul  7 18:01:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul  7 18:01:01 2012] Initial guess for spatial extent in simple fitting = 13.32"
[Sat Jul  7 18:01:01 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.965
[Sat Jul  7 18:01:01 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 13.32"
[Sat Jul  7 20:07:19 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src37.ximg exists
[Sat Jul  7 20:07:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src37.csv
[Sat Jul  7 20:07:19 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src37_1.ximg exists
[Sat Jul  7 20:07:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src37.csv
[Sat Jul  7 20:07:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul  7 20:07:21 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Sat Jul  7 20:07:21 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Sat Jul  7 20:07:21 2012] Fit fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Sat Jul  7 20:07:42 2012] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 50 at 14.957571 pixels away
[Sat Jul  7 20:07:42 2012] Vigneting correction estimate = 1.000000
[Sat Jul  7 20:07:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul  7 20:07:42 2012] Assessing source extent using major
[Sat Jul  7 20:07:42 2012] Source does appear to be extended
[Sat Jul  7 20:07:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul  7 23:28:03 2012] Using EEF radius (= 13.32 ")to estimate initial spatial extent for simple fitting
[Sat Jul  7 23:28:03 2012] Initial guess for spatial extent in simple fitting = 13.32"
[Sat Jul  7 23:28:03 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.965
[Sat Jul  7 23:28:03 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 13.32"
[Sun Jul  8 01:55:34 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src37.ximg exists
[Sun Jul  8 01:55:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src37.csv
[Sun Jul  8 01:55:34 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src37_1.ximg exists
[Sun Jul  8 01:55:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src37.csv
[Sun Jul  8 01:55:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul  8 01:55:35 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Sun Jul  8 01:55:35 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Sun Jul  8 01:55:35 2012] Fit fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Sun Jul  8 01:55:55 2012] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 50 at 16.415650 pixels away
[Sun Jul  8 01:55:55 2012] Vigneting correction estimate = 1.000000
[Sun Jul  8 01:55:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul  8 01:55:55 2012] Assessing source extent using major
[Sun Jul  8 01:55:55 2012] Source does appear to be extended
[Sun Jul  8 01:55:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul  8 09:19:29 2012] XMMSAS src. selection expression = ellipse(18707.047775, 11026.353348, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jul  8 09:19:29 2012] Writing source region out to fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src50_src.reg
[Sun Jul  8 09:19:29 2012] Extracting stamp from image fullrun_mos2_xmm0550671101_pi300-10000_cl_sm2.00.img.gz, (178, 90) - (253, 165)
[Sun Jul  8 09:19:29 2012] XMMSAS bgd. selection expression = annulus(18707.047775, 11026.353348, 1087.500000, 2175.000000, X, Y)
[Sun Jul  8 09:19:29 2012] Writing fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src50.gif
[Sun Jul  8 09:26:46 2012] Mean detx,y = (-5345.73, 13534.67) 
[Sun Jul  8 09:26:46 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul  8 09:26:51 2012] Binned source spectrum to 10 counts/bin
[Sun Jul  8 09:26:51 2012] Setting source spectrum file to fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Sun Jul  8 09:26:51 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Sun Jul  8 11:29:47 2012] Not generating rmf since there are only 91 counts
[Sun Jul  8 11:29:47 2012] rmf not generated due to insufficient counts
[Sun Jul  8 11:37:48 2012] Updating aperture counts using extracted products
[Sun Jul  8 11:37:48 2012] Error reading totcts from fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Sun Jul  8 11:37:49 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul  8 11:37:49 2012] Using photon index=1.80, rate=0.0048, arf fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src50.arf
[Sun Jul  8 11:37:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul  8 11:37:49 2012] Updating source flux to 1.3e-13
[Sun Jul  8 11:45:10 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting