[Sat Jul  7 14:41:04 2012] Detection parameters:
  Position = (246.4, 263.0) = 18 52 49.48 0 39 7.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122.7 +/- 19.7
  Background counts = 84.4
  Rate = 0.007 +/- 0.001

[Sat Jul  7 14:41:04 2012] Off-axis axis estimate = 4.56'
[Sat Jul  7 18:01:01 2012] Using EEF radius (= 8.71 ")to estimate initial spatial extent for simple fitting
[Sat Jul  7 18:01:01 2012] Initial guess for spatial extent in simple fitting = 8.71"
[Sat Jul  7 18:01:01 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.998
[Sat Jul  7 18:01:01 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 8.71"
[Sat Jul  7 20:07:19 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src25.ximg exists
[Sat Jul  7 20:07:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src25.csv
[Sat Jul  7 20:07:19 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src25_1.ximg exists
[Sat Jul  7 20:07:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src25.csv
[Sat Jul  7 20:07:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul  7 20:07:20 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sat Jul  7 20:07:20 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sat Jul  7 20:07:20 2012] Fit fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Sat Jul  7 20:07:42 2012] Warning, spatial fit 25 centroid is now closest to src. 3
[Sat Jul  7 20:07:42 2012] Vigneting correction estimate = 1.000000
[Sat Jul  7 20:07:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul  7 20:07:42 2012] Assessing source extent using major
[Sat Jul  7 20:07:42 2012] Source does appear to be extended
[Sat Jul  7 20:07:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul  7 20:07:42 2012] Source is confused with source 3
[Sat Jul  7 23:28:03 2012] Using EEF radius (= 8.71 ")to estimate initial spatial extent for simple fitting
[Sat Jul  7 23:28:03 2012] Initial guess for spatial extent in simple fitting = 8.71"
[Sat Jul  7 23:28:03 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.998
[Sat Jul  7 23:28:03 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 8.71"
[Sun Jul  8 01:55:34 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src25.ximg exists
[Sun Jul  8 01:55:34 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src25_1.ximg exists
[Sun Jul  8 01:55:34 2012] Fit fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src25 appears to have run properly
[Sun Jul  8 01:55:35 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sun Jul  8 01:55:35 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sun Jul  8 01:55:35 2012] Fit fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Sun Jul  8 01:55:55 2012] Source 43 is offset by 2.320607 and 6.473638 pixels which is larger than
2 X fitted extent = 1.836814 x 1.836814, not incorporating fit results
[Sun Jul  8 01:55:55 2012] Vigneting correction estimate = 1.000000
[Sun Jul  8 01:55:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul  8 01:55:55 2012] Assessing source extent using major
[Sun Jul  8 01:55:55 2012] Source does appear to be extended
[Sun Jul  8 01:55:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul  8 09:19:28 2012] XMMSAS src. selection expression = ellipse(21387.634384, 22832.842499, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jul  8 09:19:28 2012] Writing source region out to fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src43_src.reg
[Sun Jul  8 09:19:28 2012] Extracting stamp from image fullrun_mos2_xmm0550671101_pi300-10000_cl_sm2.00.img.gz, (209, 226) - (284, 301)
[Sun Jul  8 09:19:28 2012] XMMSAS bgd. selection expression = annulus(21387.634384, 22832.842499, 1087.500000, 2175.000000, X, Y) && !ellipse(24826.604000, 21283.794000, 1318.680038, 1318.680038, 0.000000, X, Y) && !ellipse(22994.021362, 22043.044296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21697.202000, 22886.388000, 1393.304040, 1393.304040, 0.000000, X, Y) && !ellipse(25196.678000, 24045.318000, 2353.312068, 1052.576030, 28.121100, X, Y) && !ellipse(23492.200439, 21011.967651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23746.615967, 22920.086761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22343.191400, 23856.168000, 1206.512035, 1206.512035, 0.000000, X, Y) && !ellipse(19934.878000, 23686.086000, 507.501615, 507.501615, 0.000000, X, Y) && !ellipse(21614.677732, 24816.018200, 878.224025, 878.224025, 0.000000, X, Y) && !ellipse(21343.499832, 23266.740662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25019.260000, 26682.914000, 2096.784060, 621.151218, 46.082000, X, Y) && !ellipse(19861.747894, 23263.719238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24192.946000, 22869.574000, 1292.280037, 1292.280037, 0.000000, X, Y) && !ellipse(23639.671387, 23700.267120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19249.942887, 24284.694999, 1480.336043, 308.594357, 92.365931, X, Y) && !ellipse(23108.054871, 23736.271973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21198.337380, 20884.401400, 632.898418, 632.898418, 0.000000, X, Y)
[Sun Jul  8 09:19:28 2012] Writing fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src43.gif
[Sun Jul  8 09:23:16 2012] Mean detx,y = (-3080.26, 1634.40) 
[Sun Jul  8 09:23:17 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul  8 09:23:24 2012] Binned source spectrum to 10 counts/bin
[Sun Jul  8 09:23:24 2012] Setting source spectrum file to fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sun Jul  8 09:23:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Sun Jul  8 10:56:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul  8 10:56:47 2012] rmf not generated due to insufficient counts
[Sun Jul  8 11:37:48 2012] Updating aperture counts using extracted products
[Sun Jul  8 11:37:48 2012] Error reading totcts from fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sun Jul  8 11:37:49 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul  8 11:37:49 2012] Using photon index=1.80, rate=0.00729, arf fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src43.arf
[Sun Jul  8 11:37:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul  8 11:37:49 2012] Updating source flux to 8.7e-14
[Sun Jul  8 11:45:10 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting