[Sat Jul  7 14:41:04 2012] Detection parameters:
  Position = (307.2, 271.1) = 18 52 31.83 0 39 41.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 175.8 +/- 21.4
  Background counts = 69.7
  Rate = 0.01 +/- 0.001

[Sat Jul  7 14:41:04 2012] Off-axis axis estimate = 2.08'
[Sat Jul  7 18:01:01 2012] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting
[Sat Jul  7 18:01:01 2012] Initial guess for spatial extent in simple fitting = 7.47"
[Sat Jul  7 18:01:01 2012] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.763
[Sat Jul  7 18:01:01 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 7.47"
[Sat Jul  7 20:07:19 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src19.ximg exists
[Sat Jul  7 20:07:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src19.csv
[Sat Jul  7 20:07:19 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src19_1.ximg exists
[Sat Jul  7 20:07:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src19.csv
[Sat Jul  7 20:07:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul  7 20:07:20 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sat Jul  7 20:07:20 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sat Jul  7 20:07:20 2012] Fit fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sat Jul  7 20:07:42 2012] Spatial fit model total counts = 1578.790000, observed total counts = 1580.000000
[Sat Jul  7 20:07:42 2012] Offset between fit and detection position for source 39 = 1.792080 pixels
[Sat Jul  7 20:07:42 2012] 1493.548000 total counts/ 1360.370000 bgd. counts: snr = 3.610804
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 1.792080 pixels
  Position = (308.9, 271.7) = 18 52 31.35 0 39 44.9
  Extent = 11.3 (5.9-14.9)", rotation angle = 0
  Source counts = 133.2 +/- 38.6
  Background counts = 1360.4
  Rate = 0.007 +/- 0.002
[Sat Jul  7 20:07:42 2012] Vigneting correction estimate = 1.000000
[Sat Jul  7 20:07:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul  7 20:07:42 2012] Assessing source extent using major axis lower bound
[Sat Jul  7 20:07:42 2012] Source does appear to be extended
[Sat Jul  7 20:07:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul  7 20:07:42 2012] Source is confused with source 40
[Sat Jul  7 23:28:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul  7 23:28:03 2012] Initial guess for spatial extent in simple fitting = 11.34"
[Sat Jul  7 23:28:03 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.932
[Sat Jul  7 23:28:03 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 11.34"
[Sun Jul  8 01:55:33 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src19.ximg exists
[Sun Jul  8 01:55:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src19.csv
[Sun Jul  8 01:55:33 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src19_1.ximg exists
[Sun Jul  8 01:55:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src19.csv
[Sun Jul  8 01:55:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul  8 01:55:35 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sun Jul  8 01:55:35 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sun Jul  8 01:55:35 2012] Fit fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sun Jul  8 01:55:55 2012] Warning, spatial fit 19 centroid is now closest to src. 33
[Sun Jul  8 01:55:55 2012] Vigneting correction estimate = 1.000000
[Sun Jul  8 01:55:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul  8 01:55:55 2012] Assessing source extent using major axis lower bound
[Sun Jul  8 01:55:55 2012] Source does appear to be extended
[Sun Jul  8 01:55:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul  8 09:19:28 2012] XMMSAS src. selection expression = ellipse(26827.684600, 23592.794600, 680.424020, 680.424020, 0.000000, X, Y)
[Sun Jul  8 09:19:28 2012] Writing source region out to fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src39_src.reg
[Sun Jul  8 09:19:28 2012] Extracting stamp from image fullrun_mos2_xmm0550671101_pi300-10000_cl_sm2.00.img.gz, (270, 233) - (348, 311)
[Sun Jul  8 09:19:28 2012] XMMSAS bgd. selection expression = annulus(26827.684600, 23592.794600, 1134.040033, 2268.080065, X, Y) && !ellipse(24678.442000, 24267.241800, 303.646409, 303.646409, 0.000000, X, Y) && !ellipse(25753.386000, 22052.692600, 1280.504037, 1280.504037, 0.000000, X, Y) && !ellipse(24826.604000, 21283.794000, 1318.680038, 1318.680038, 0.000000, X, Y) && !ellipse(26041.598000, 22254.338000, 915.000026, 915.000026, 0.000000, X, Y) && !ellipse(25049.692000, 21429.978000, 1318.680038, 1318.680038, 0.000000, X, Y) && !ellipse(25196.678000, 24045.318000, 2353.312068, 1052.576030, 28.121100, X, Y) && !ellipse(23746.615967, 22920.086761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24858.871460, 22103.576309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24634.232000, 26783.588000, 1491.184043, 1491.184043, 0.000000, X, Y) && !ellipse(26538.586000, 22638.160000, 1627.896047, 1627.896047, 0.000000, X, Y) && !ellipse(27279.138000, 26620.216000, 1063.848031, 1063.848031, 0.000000, X, Y) && !ellipse(26145.638000, 23393.708000, 1176.656034, 1176.656034, 0.000000, X, Y) && !ellipse(27761.189600, 25370.112000, 1151.976033, 1151.976033, 0.000000, X, Y) && !ellipse(25238.139740, 24898.970367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26254.110000, 24743.668000, 1148.680033, 1148.680033, 0.000000, X, Y) && !ellipse(27161.284400, 26055.558000, 1124.560032, 1124.560032, 0.000000, X, Y) && !ellipse(27306.592000, 24328.604400, 1148.680033, 1148.680033, 0.000000, X, Y) && !ellipse(25019.260000, 26682.914000, 2096.784060, 621.151218, 46.082000, X, Y) && !ellipse(25702.678000, 26035.398540, 1048.392030, 1048.392030, 0.000000, X, Y) && !ellipse(24192.946000, 22869.574000, 1292.280037, 1292.280037, 0.000000, X, Y) && !ellipse(26556.976000, 25149.257400, 2194.816063, 2194.816063, 0.000000, X, Y) && !ellipse(26207.982117, 25968.554230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28411.122772, 25962.455627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28235.928009, 24934.008789, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul  8 09:19:28 2012] Writing fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src39.gif
[Sun Jul  8 09:22:26 2012] Mean detx,y = (2157.50, 671.28) 
[Sun Jul  8 09:22:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul  8 09:22:33 2012] Binned source spectrum to 10 counts/bin
[Sun Jul  8 09:22:33 2012] Setting source spectrum file to fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sun Jul  8 09:22:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Sun Jul  8 11:37:48 2012] Updating aperture counts using extracted products
[Sun Jul  8 11:37:48 2012] Error reading totcts from fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sun Jul  8 11:37:49 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul  8 11:37:49 2012] Using photon index=1.80, rate=0.00712, arf fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src39.arf
[Sun Jul  8 11:37:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul  8 11:37:49 2012] Updating source flux to 7.3e-14
[Sun Jul  8 11:45:10 2012] Flag c found in src. 39 procflags, skipping spectral fitting