[Sat Jul 7 14:41:03 2012] Detection parameters: Position = (312.7, 281.1) = 18 52 30.26 0 40 27.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 103.7 +/- 18.0 Background counts = 64.7 Rate = 0.006 +/- 0.001 [Sat Jul 7 14:41:04 2012] Off-axis axis estimate = 1.63' [Sat Jul 7 18:01:01 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting [Sat Jul 7 18:01:01 2012] Initial guess for spatial extent in simple fitting = 7.24" [Sat Jul 7 18:01:01 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853 [Sat Jul 7 18:01:01 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 7.24" [Sat Jul 7 20:07:19 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src29.ximg exists [Sat Jul 7 20:07:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src29.csv [Sat Jul 7 20:07:19 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src29_1.ximg exists [Sat Jul 7 20:07:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src29.csv [Sat Jul 7 20:07:19 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src29_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jul 7 20:07:20 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists [Sat Jul 7 20:07:20 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists [Sat Jul 7 20:07:20 2012] Fit fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly [Sat Jul 7 20:07:42 2012] Source 33 is offset by -3.546113 and -7.589062 pixels which is larger than 2 X fitted extent = 0.864745 x 0.864745, not incorporating fit results [Sat Jul 7 20:07:42 2012] Vigneting correction estimate = 1.000000 [Sat Jul 7 20:07:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jul 7 20:07:42 2012] Assessing source extent using major [Sat Jul 7 20:07:42 2012] Source does appear to be extended [Sat Jul 7 20:07:42 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jul 7 20:07:42 2012] Source is confused with source 30 [Sat Jul 7 23:28:03 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting [Sat Jul 7 23:28:03 2012] Initial guess for spatial extent in simple fitting = 7.24" [Sat Jul 7 23:28:03 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853 [Sat Jul 7 23:28:03 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 7.24" [Sun Jul 8 01:55:34 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src29.ximg exists [Sun Jul 8 01:55:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src29.csv [Sun Jul 8 01:55:34 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src29_1.ximg exists [Sun Jul 8 01:55:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src29.csv [Sun Jul 8 01:55:34 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src29_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jul 8 01:55:35 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists [Sun Jul 8 01:55:35 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists [Sun Jul 8 01:55:35 2012] Fit fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly [Sun Jul 8 01:55:55 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 16.363530 pixels away [Sun Jul 8 01:55:55 2012] Source 33 is offset by 6.924300 and 1.312087 pixels which is larger than 2 X fitted extent = 1.655136 x 1.655136, not incorporating fit results [Sun Jul 8 01:55:55 2012] Warning, spatial fit 29 centroid is now closest to src. 24 [Sun Jul 8 01:55:55 2012] Spatial fit model total counts = 1487.830000, observed total counts = 1488.000000 [Sun Jul 8 01:55:55 2012] Offset between fit and detection position for source 33 = 1.950156 pixels [Sun Jul 8 01:55:55 2012] Warning, changing simple spatial fit ID from 29 to 34 [Sun Jul 8 01:55:55 2012] 1374.176000 total counts/ 1254.720000 bgd. counts: snr = 3.372365 Spatial fit parameters: Offset between fit and detection position for source 33 = 1.950156 pixels Position = (314.4, 280.2) = 18 52 29.75 0 40 21.7 Extent = 14.4 (14.3-28.7)", rotation angle = 0 Source counts = 119.5 +/- 37.1 Background counts = 1254.7 Rate = 0.006 +/- 0.002 [Sun Jul 8 01:55:55 2012] Vigneting correction estimate = 1.000000 [Sun Jul 8 01:55:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jul 8 01:55:55 2012] Assessing source extent using major axis lower bound [Sun Jul 8 01:55:55 2012] Source does appear to be extended [Sun Jul 8 01:55:55 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jul 8 09:19:29 2012] XMMSAS src. selection expression = ellipse(27306.592000, 24328.604400, 861.510025, 861.510025, 0.000000, X, Y) [Sun Jul 8 09:19:29 2012] Writing source region out to fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src33_src.reg [Sun Jul 8 09:19:29 2012] Extracting stamp from image fullrun_mos2_xmm0550671101_pi300-10000_cl_sm2.00.img.gz, (265, 231) - (364, 330) [Sun Jul 8 09:19:29 2012] XMMSAS bgd. selection expression = annulus(27306.592000, 24328.604400, 1435.850041, 2871.700083, X, Y) && !ellipse(24678.442000, 24267.241800, 303.646409, 303.646409, 0.000000, X, Y) && !ellipse(25753.386000, 22052.692600, 1280.504037, 1280.504037, 0.000000, X, Y) && !ellipse(24826.604000, 21283.794000, 1318.680038, 1318.680038, 0.000000, X, Y) && !ellipse(26041.598000, 22254.338000, 915.000026, 915.000026, 0.000000, X, Y) && !ellipse(25049.692000, 21429.978000, 1318.680038, 1318.680038, 0.000000, X, Y) && !ellipse(25196.678000, 24045.318000, 2353.312068, 1052.576030, 28.121100, X, Y) && !ellipse(23746.615967, 22920.086761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24858.871460, 22103.576309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24634.232000, 26783.588000, 1491.184043, 1491.184043, 0.000000, X, Y) && !ellipse(26538.586000, 22638.160000, 1627.896047, 1627.896047, 0.000000, X, Y) && !ellipse(27279.138000, 26620.216000, 1063.848031, 1063.848031, 0.000000, X, Y) && !ellipse(26145.638000, 23393.708000, 1176.656034, 1176.656034, 0.000000, X, Y) && !ellipse(26827.684600, 23592.794600, 907.232026, 907.232026, 0.000000, X, Y) && !ellipse(27761.189600, 25370.112000, 1151.976033, 1151.976033, 0.000000, X, Y) && !ellipse(25238.139740, 24898.970367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26254.110000, 24743.668000, 1148.680033, 1148.680033, 0.000000, X, Y) && !ellipse(27161.284400, 26055.558000, 1124.560032, 1124.560032, 0.000000, X, Y) && !ellipse(27362.789764, 27084.003723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25019.260000, 26682.914000, 2096.784060, 621.151218, 46.082000, X, Y) && !ellipse(25702.678000, 26035.398540, 1048.392030, 1048.392030, 0.000000, X, Y) && !ellipse(24192.946000, 22869.574000, 1292.280037, 1292.280037, 0.000000, X, Y) && !ellipse(26556.976000, 25149.257400, 2194.816063, 2194.816063, 0.000000, X, Y) && !ellipse(23639.671387, 23700.267120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26207.982117, 25968.554230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28411.122772, 25962.455627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28974.158000, 27121.036000, 1215.992035, 1215.992035, 0.000000, X, Y) && !ellipse(28235.928009, 24934.008789, 870.000000, 870.000000, 0.000000, X, Y) [Sun Jul 8 09:19:29 2012] Writing fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src33.gif [Sun Jul 8 09:24:04 2012] Mean detx,y = (2526.34, -72.44) [Sun Jul 8 09:24:05 2012] Setting backscal keywords in source and bgd. spectrum [Sun Jul 8 09:24:12 2012] Binned source spectrum to 10 counts/bin [Sun Jul 8 09:24:12 2012] Setting source spectrum file to fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src33_src_b10.pi.gz [Sun Jul 8 09:24:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src33_bgd.pi.gz [Sun Jul 8 11:37:48 2012] Updating aperture counts using extracted products [Sun Jul 8 11:37:48 2012] Error reading totcts from fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src33_src_b10.pi.gz [Sun Jul 8 11:37:49 2012] Calculating source flux in energy range 0.30-8.00 [Sun Jul 8 11:37:49 2012] Using photon index=1.80, rate=0.00639, arf fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src33.arf [Sun Jul 8 11:37:49 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jul 8 11:37:49 2012] Updating source flux to 6.3e-14 [Sun Jul 8 11:45:10 2012] Flag b found in src. 33 procflags, skipping spectral fitting [Sun Jul 8 11:45:10 2012] Flag c found in src. 33 procflags, skipping spectral fitting