[Sat Jul  7 14:41:03 2012] Detection parameters:
  Position = (285.6, 308.2) = 18 52 38.10 0 42 24.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 210.9 +/- 22.7
  Background counts = 75.3
  Rate = 0.01 +/- 0.001

[Sat Jul  7 14:41:04 2012] Off-axis axis estimate = 1.17'
[Sat Jul  7 18:01:01 2012] Using EEF radius (= 7.01 ")to estimate initial spatial extent for simple fitting
[Sat Jul  7 18:01:01 2012] Initial guess for spatial extent in simple fitting = 7.01"
[Sat Jul  7 18:01:01 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.897
[Sat Jul  7 18:01:01 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 7.01"
[Sat Jul  7 20:07:19 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src14.ximg exists
[Sat Jul  7 20:07:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src14.csv
[Sat Jul  7 20:07:19 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src14_1.ximg exists
[Sat Jul  7 20:07:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src14.csv
[Sat Jul  7 20:07:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul  7 20:07:20 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sat Jul  7 20:07:20 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sat Jul  7 20:07:20 2012] Fit fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Sat Jul  7 20:07:42 2012] Spatial fit model total counts = 1040.770000, observed total counts = 1039.000000
[Sat Jul  7 20:07:42 2012] Offset between fit and detection position for source 16 = 1.646521 pixels
[Sat Jul  7 20:07:42 2012] 1015.269000 total counts/ 723.209000 bgd. counts: snr = 10.860259
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 1.646521 pixels
  Position = (284.0, 308.6) = 18 52 38.57 0 42 25.2
  Extent = 10.4 (8.5-12.6)", rotation angle = 0
  Source counts = 292.1 +/- 31.9
  Background counts = 723.2
  Rate = 0.02 +/- 0.002
[Sat Jul  7 20:07:42 2012] Spatial fit model total counts = 899.381000, observed total counts = 922.000000
[Sat Jul  7 20:07:42 2012] Offset between fit and detection position for source 16 = 1.039691 pixels
[Sat Jul  7 20:07:42 2012] Warning, changing simple spatial fit ID from 14 to 30
[Sat Jul  7 20:07:42 2012] 873.632000 total counts/ 717.375000 bgd. counts: snr = 5.833999
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 1.039691 pixels
  Position = (285.1, 308.4) = 18 52 38.27 0 42 24.4
  Extent = 9.4 (6.7-13.7)", rotation angle = 0
  Source counts = 156.3 +/- 29.6
  Background counts = 717.4
  Rate = 0.008 +/- 0.002
[Sat Jul  7 20:07:42 2012] Vigneting correction estimate = 1.000000
[Sat Jul  7 20:07:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul  7 20:07:42 2012] Assessing source extent using major axis lower bound
[Sat Jul  7 20:07:42 2012] Source does appear to be extended
[Sat Jul  7 20:07:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul  7 23:28:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul  7 23:28:03 2012] Initial guess for spatial extent in simple fitting = 9.36"
[Sat Jul  7 23:28:03 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.066
[Sat Jul  7 23:28:03 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 9.36"
[Sun Jul  8 01:55:33 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src14.ximg exists
[Sun Jul  8 01:55:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src14.csv
[Sun Jul  8 01:55:33 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src14_1.ximg exists
[Sun Jul  8 01:55:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src14.csv
[Sun Jul  8 01:55:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul  8 01:55:35 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sun Jul  8 01:55:35 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sun Jul  8 01:55:35 2012] Fit fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Sun Jul  8 01:55:55 2012] Spatial fit model total counts = 1061.160000, observed total counts = 1039.000000
[Sun Jul  8 01:55:55 2012] Offset between fit and detection position for source 16 = 1.341543 pixels
[Sun Jul  8 01:55:55 2012] 994.076000 total counts/ 336.843000 bgd. counts: snr = 35.810105
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 1.341543 pixels
  Position = (283.7, 308.4) = 18 52 38.66 0 42 24.4
  Extent = 18.6 (18.5-18.7)", rotation angle = 0
  Source counts = 657.2 +/- 31.5
  Background counts = 336.8
  Rate = 0.04 +/- 0.002
[Sun Jul  8 01:55:55 2012] Vigneting correction estimate = 1.000000
[Sun Jul  8 01:55:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul  8 01:55:55 2012] Assessing source extent using major axis lower bound
[Sun Jul  8 01:55:55 2012] Source does appear to be extended
[Sun Jul  8 01:55:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul  8 01:55:55 2012] Source is confused with source 13
[Sun Jul  8 09:19:28 2012] XMMSAS src. selection expression = ellipse(24634.232000, 26783.588000, 1118.388032, 1118.388032, 0.000000, X, Y)
[Sun Jul  8 09:19:28 2012] Writing source region out to fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src16_src.reg
[Sun Jul  8 09:19:28 2012] Extracting stamp from image fullrun_mos2_xmm0550671101_pi300-10000_cl_sm2.00.img.gz, (219, 244) - (348, 373)
[Sun Jul  8 09:19:28 2012] XMMSAS bgd. selection expression = annulus(24634.232000, 26783.588000, 1863.980054, 3727.960107, X, Y) && !ellipse(24678.442000, 24267.241800, 303.646409, 303.646409, 0.000000, X, Y) && !ellipse(25753.386000, 22052.692600, 1280.504037, 1280.504037, 0.000000, X, Y) && !ellipse(26041.598000, 22254.338000, 915.000026, 915.000026, 0.000000, X, Y) && !ellipse(21697.202000, 22886.388000, 1393.304040, 1393.304040, 0.000000, X, Y) && !ellipse(25196.678000, 24045.318000, 2353.312068, 1052.576030, 28.121100, X, Y) && !ellipse(23746.615967, 22920.086761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22343.191400, 23856.168000, 1206.512035, 1206.512035, 0.000000, X, Y) && !ellipse(26538.586000, 22638.160000, 1627.896047, 1627.896047, 0.000000, X, Y) && !ellipse(27279.138000, 26620.216000, 1063.848031, 1063.848031, 0.000000, X, Y) && !ellipse(26145.638000, 23393.708000, 1176.656034, 1176.656034, 0.000000, X, Y) && !ellipse(26827.684600, 23592.794600, 907.232026, 907.232026, 0.000000, X, Y) && !ellipse(27761.189600, 25370.112000, 1151.976033, 1151.976033, 0.000000, X, Y) && !ellipse(25238.139740, 24898.970367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21614.677732, 24816.018200, 878.224025, 878.224025, 0.000000, X, Y) && !ellipse(26254.110000, 24743.668000, 1148.680033, 1148.680033, 0.000000, X, Y) && !ellipse(21387.634384, 22832.842499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21343.499832, 23266.740662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27161.284400, 26055.558000, 1124.560032, 1124.560032, 0.000000, X, Y) && !ellipse(27362.789764, 27084.003723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27306.592000, 24328.604400, 1148.680033, 1148.680033, 0.000000, X, Y) && !ellipse(25019.260000, 26682.914000, 2096.784060, 621.151218, 46.082000, X, Y) && !ellipse(25702.678000, 26035.398540, 1048.392030, 1048.392030, 0.000000, X, Y) && !ellipse(24192.946000, 22869.574000, 1292.280037, 1292.280037, 0.000000, X, Y) && !ellipse(26556.976000, 25149.257400, 2194.816063, 2194.816063, 0.000000, X, Y) && !ellipse(23639.671387, 23700.267120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21593.825000, 26361.562000, 1320.152038, 1320.152038, 0.000000, X, Y) && !ellipse(23108.054871, 23736.271973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26207.982117, 25968.554230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28411.122772, 25962.455627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28974.158000, 27121.036000, 1215.992035, 1215.992035, 0.000000, X, Y) && !ellipse(28235.928009, 24934.008789, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul  8 09:19:28 2012] Writing fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src16.gif
[Sun Jul  8 09:21:47 2012] Mean detx,y = (-28.90, -2413.71) 
[Sun Jul  8 09:21:48 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul  8 09:21:54 2012] Binned source spectrum to 10 counts/bin
[Sun Jul  8 09:21:54 2012] Setting source spectrum file to fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sun Jul  8 09:21:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sun Jul  8 11:37:48 2012] Updating aperture counts using extracted products
[Sun Jul  8 11:37:48 2012] Error reading totcts from fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sun Jul  8 11:37:49 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul  8 11:37:49 2012] Using photon index=1.80, rate=0.0352, arf fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src16.arf
[Sun Jul  8 11:37:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul  8 11:37:49 2012] Updating source flux to 3.6e-13
[Sun Jul  8 11:45:10 2012] Flag c found in src. 16 procflags, skipping spectral fitting