[Sat Jul  7 14:41:03 2012] Detection parameters:
  Position = (255.9, 182.8) = 18 52 46.73 0 33 17.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 508.7 +/- 28.4
  Background counts = 24.1
  Rate = 0.05 +/- 0.003

[Sat Jul  7 14:41:04 2012] Off-axis axis estimate = 8.94'
[Sat Jul  7 18:01:01 2012] Using EEF radius (= 10.90 ")to estimate initial spatial extent for simple fitting
[Sat Jul  7 18:01:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul  7 18:01:01 2012] Initial guess for spatial extent in simple fitting = 10.90"
[Sat Jul  7 18:01:01 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.997
[Sat Jul  7 18:01:01 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.90"
[Sat Jul  7 20:07:19 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul  7 20:07:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src1.csv
[Sat Jul  7 20:07:19 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul  7 20:07:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src1.csv
[Sat Jul  7 20:07:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul  7 20:07:20 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul  7 20:07:20 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul  7 20:07:20 2012] Fit fullrun_mos2_xmm0550671101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jul  7 20:07:42 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 13.740069 pixels away
[Sat Jul  7 20:07:42 2012] Vigneting correction estimate = 1.000000
[Sat Jul  7 20:07:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul  7 20:07:42 2012] Assessing source extent using major
[Sat Jul  7 20:07:42 2012] Source does appear to be extended
[Sat Jul  7 20:07:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul  7 23:28:03 2012] Using EEF radius (= 10.90 ")to estimate initial spatial extent for simple fitting
[Sat Jul  7 23:28:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul  7 23:28:03 2012] Initial guess for spatial extent in simple fitting = 10.90"
[Sat Jul  7 23:28:03 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.997
[Sat Jul  7 23:28:03 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.90"
[Sun Jul  8 01:55:33 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jul  8 01:55:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src1.csv
[Sun Jul  8 01:55:33 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jul  8 01:55:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src1.csv
[Sun Jul  8 01:55:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul  8 01:55:34 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jul  8 01:55:34 2012] fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jul  8 01:55:34 2012] Fit fullrun_mos2_xmm0550671101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jul  8 01:55:55 2012] Spatial fit model total counts = 823.998000, observed total counts = 824.000000
[Sun Jul  8 01:55:55 2012] Offset between fit and detection position for source 11 = 0.261560 pixels
[Sun Jul  8 01:55:55 2012] 831.200000 total counts/ 426.868000 bgd. counts: snr = 19.570022
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.261560 pixels
  Position = (256.1, 182.6) = 18 52 46.67 0 33 17.1
  Extent = 7.1 (6.4-7.6)", rotation angle = 0
  Source counts = 404.3 +/- 28.8
  Background counts = 426.9
  Rate = 0.02 +/- 0.002
[Sun Jul  8 01:55:55 2012] Vigneting correction estimate = 1.000000
[Sun Jul  8 01:55:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul  8 01:55:55 2012] Assessing source extent using major axis lower bound
[Sun Jul  8 01:55:55 2012] Source does appear to be extended
[Sun Jul  8 01:55:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul  8 09:19:27 2012] XMMSAS src. selection expression = ellipse(22232.659000, 15838.296200, 424.108212, 424.108212, 0.000000, X, Y)
[Sun Jul  8 09:19:27 2012] Writing source region out to fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src11_src.reg
[Sun Jul  8 09:19:27 2012] Extracting stamp from image fullrun_mos2_xmm0550671101_pi300-10000_cl_sm2.00.img.gz, (232, 158) - (280, 207)
[Sun Jul  8 09:19:27 2012] XMMSAS bgd. selection expression = annulus(22232.659000, 15838.296200, 706.847020, 1413.694041, X, Y)
[Sun Jul  8 09:19:27 2012] Writing fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src11.gif
[Sun Jul  8 09:19:32 2012] Mean detx,y = (-2054.72, 8597.69) 
[Sun Jul  8 09:19:33 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul  8 09:19:39 2012] Binned source spectrum to 10 counts/bin
[Sun Jul  8 09:19:39 2012] Setting source spectrum file to fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Jul  8 09:19:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun Jul  8 11:37:48 2012] Updating aperture counts using extracted products
[Sun Jul  8 11:37:48 2012] Error reading totcts from fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Jul  8 11:37:49 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul  8 11:37:49 2012] Using photon index=1.80, rate=0.0216, arf fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src11.arf
[Sun Jul  8 11:37:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul  8 11:37:49 2012] Updating source flux to 4.1e-13
[Sun Jul  8 11:50:57 2012] Reading fit data from xmm0550671101/analysis//spectral/fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src11_pl.csv
[Sun Jul  8 11:50:57 2012] Spectral fit parameter nH value = 3.0441e+22
[Sun Jul  8 11:50:57 2012] Spectral fit parameter PhoIndex value = 3.43094
[Sun Jul  8 11:50:57 2012] Failed to get F(0.3-8.0) from xmm0550671101/analysis//spectral/fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src11_pl.csv, possibly due to different flux energy range selected
[Sun Jul  8 11:50:57 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul  8 11:50:57 2012] Using Nh = 3e+22, photon index=3.43, rate=0.0216, arf fullrun_mos2_xmm0550671101_pi300-10000_pass1_cl_src11.arf
[Sun Jul  8 11:50:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul  8 11:50:57 2012] Updating source flux to 6.1e-13