[Sat Jul 7 14:40:36 2012] Detection parameters: Position = (307.7, 285.0) = 18 52 31.70 0 40 42.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 68.8 +/- 16.8 Background counts = 82.8 Rate = 0.004 +/- 0.0009 [Sat Jul 7 14:40:36 2012] Off-axis axis estimate = 1.18' [Sat Jul 7 15:11:30 2012] Using EEF radius (= 7.02 ")to estimate initial spatial extent for simple fitting [Sat Jul 7 15:11:30 2012] Initial guess for spatial extent in simple fitting = 7.02" [Sat Jul 7 15:11:30 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.895 [Sat Jul 7 15:11:30 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 7.02" [Sat Jul 7 18:01:00 2012] fullrun_mos1_xmm0550671101_pi300-10000_cl_pass0_src49.ximg exists [Sat Jul 7 18:01:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671101_pi300-10000_cl_pass0_src49.csv [Sat Jul 7 18:01:00 2012] fullrun_mos1_xmm0550671101_pi300-10000_cl_pass0_src49_1.ximg exists [Sat Jul 7 18:01:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671101_pi300-10000_cl_pass0_src49.csv [Sat Jul 7 18:01:00 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0550671101_pi300-10000_cl_pass0_src49_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0550671101_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jul 7 18:01:01 2012] fullrun_mos1_xmm0550671101_pi300-10000_cl_pass0_tfrozen_src49.ximg exists [Sat Jul 7 18:01:01 2012] fullrun_mos1_xmm0550671101_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists [Sat Jul 7 18:01:01 2012] Fit fullrun_mos1_xmm0550671101_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly [Sat Jul 7 20:07:35 2012] Spatial fit model total counts = 1377.380000, observed total counts = 1375.000000 [Sat Jul 7 20:07:35 2012] Offset between fit and detection position for source 29 = 6.135855 pixels [Sat Jul 7 20:07:35 2012] Warning, changing simple spatial fit ID from 49 to 38 [Sat Jul 7 20:07:35 2012] 1389.745000 total counts/ 1162.390000 bgd. counts: snr = 6.668506 Spatial fit parameters: Offset between fit and detection position for source 29 = 6.135855 pixels Position = (301.8, 286.7) = 18 52 33.41 0 40 50.1 Extent = 13.6 (13.6-27.2)", rotation angle = 0 Source counts = 227.4 +/- 37.3 Background counts = 1162.4 Rate = 0.01 +/- 0.002 [Sat Jul 7 20:07:35 2012] Vigneting correction estimate = 1.000000 [Sat Jul 7 20:07:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jul 7 20:07:35 2012] Assessing source extent using major axis lower bound [Sat Jul 7 20:07:35 2012] Source does appear to be extended [Sat Jul 7 20:07:35 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jul 7 20:07:35 2012] Source is confused with source 32 [Sat Jul 7 20:35:21 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Sat Jul 7 20:35:21 2012] Initial guess for spatial extent in simple fitting = 13.61" [Sat Jul 7 20:35:21 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.930 [Sat Jul 7 20:35:21 2012] Giving source the simple spatial ID 43 for pass 1, mean size = 13.61" [Sat Jul 7 23:28:02 2012] fullrun_mos1_xmm0550671101_pi300-10000_cl_pass1_src43.ximg exists [Sat Jul 7 23:28:02 2012] fullrun_mos1_xmm0550671101_pi300-10000_cl_pass1_src43_1.ximg exists [Sat Jul 7 23:28:02 2012] Fit fullrun_mos1_xmm0550671101_pi300-10000_cl_pass1_src43 appears to have run properly [Sat Jul 7 23:28:03 2012] fullrun_mos1_xmm0550671101_pi300-10000_cl_pass1_tfrozen_src43.ximg exists [Sat Jul 7 23:28:03 2012] fullrun_mos1_xmm0550671101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists [Sat Jul 7 23:28:03 2012] Fit fullrun_mos1_xmm0550671101_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly [Sun Jul 8 01:55:48 2012] Source 29 is offset by 5.311632 and 1.252529 pixels which is larger than 2 X fitted extent = 1.686014 x 1.686014, not incorporating fit results [Sun Jul 8 01:55:48 2012] Spatial fit model total counts = 1680.900000, observed total counts = 1676.000000 [Sun Jul 8 01:55:48 2012] Offset between fit and detection position for source 29 = 0.317732 pixels [Sun Jul 8 01:55:48 2012] Warning, changing simple spatial fit ID from 43 to 22 [Sun Jul 8 01:55:48 2012] 1609.019000 total counts/ 1355.790000 bgd. counts: snr = 6.877288 Spatial fit parameters: Offset between fit and detection position for source 29 = 0.317732 pixels Position = (302.0, 287.0) = 18 52 33.35 0 40 51.2 Extent = 21.6 (21.5-43.2)" x 9.7 (5.9-14.0)", rotation angle = 143 (130-163) degrees Source counts = 253.2 +/- 40.1 Background counts = 1355.8 Rate = 0.01 +/- 0.002 [Sun Jul 8 01:55:48 2012] Vigneting correction estimate = 1.000000 [Sun Jul 8 01:55:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jul 8 01:55:48 2012] Assessing source extent using major axis lower bound [Sun Jul 8 01:55:48 2012] Source does appear to be extended [Sun Jul 8 01:55:48 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.54 [Sun Jul 8 01:55:48 2012] Source is asymmetric [Sun Jul 8 02:54:32 2012] XMMSAS src. selection expression = ellipse(26227.556000, 24919.406778, 1295.232037, 582.232817, 143.282000, X, Y) [Sun Jul 8 02:54:32 2012] Writing source region out to fullrun_mos1_xmm0550671101_pi300-10000_pass1_cl_src29_src.reg [Sun Jul 8 02:54:32 2012] Extracting stamp from image fullrun_mos1_xmm0550671101_pi300-10000_cl_sm2.00.img.gz, (228, 213) - (376, 361) [Sun Jul 8 02:54:32 2012] XMMSAS bgd. selection expression = annulus(26227.556000, 24919.406778, 2158.720062, 4317.440124, X, Y) && !ellipse(24822.909088, 22356.968323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24671.864600, 24283.679400, 315.662409, 315.662409, 0.000000, X, Y) && !ellipse(25432.254000, 21722.592000, 2172.224063, 1090.592031, 136.035000, X, Y) && !ellipse(24940.800000, 21440.762000, 1318.832038, 914.504026, 334.041000, X, Y) && !ellipse(25667.152000, 21923.548000, 2492.688072, 1130.504033, 319.310000, X, Y) && !ellipse(22808.674800, 22437.556000, 585.356817, 585.356817, 0.000000, X, Y) && !ellipse(22495.103600, 22010.704000, 886.896026, 886.896026, 0.000000, X, Y) && !ellipse(23620.248800, 21055.932600, 603.212017, 603.212017, 0.000000, X, Y) && !ellipse(23763.940000, 23131.788000, 1294.576037, 1294.576037, 0.000000, X, Y) && !ellipse(22306.298200, 22808.680000, 1773.792051, 1773.792051, 0.000000, X, Y) && !ellipse(25968.114560, 23711.852600, 612.437618, 612.437618, 0.000000, X, Y) && !ellipse(22066.051481, 22853.428318, 2130.120061, 2085.890944, 90.000000, X, Y) && !ellipse(23868.528000, 20879.642000, 1977.400057, 1977.400057, 0.000000, X, Y) && !ellipse(25587.408000, 24437.422000, 2177.472063, 2177.472063, 0.000000, X, Y) && !ellipse(26264.552000, 22323.898000, 1246.344036, 1246.344036, 0.000000, X, Y) && !ellipse(23367.936000, 22994.282000, 2551.456073, 2551.456073, 0.000000, X, Y) && !ellipse(24720.688800, 26811.365000, 1120.880032, 1120.880032, 0.000000, X, Y) && !ellipse(24013.158000, 21072.039600, 1206.424035, 1206.424035, 0.000000, X, Y) && !ellipse(22424.006000, 23393.795000, 1321.896038, 1321.896038, 0.000000, X, Y) && !ellipse(26984.734000, 23594.906000, 1173.464034, 1173.464034, 354.386000, X, Y) && !ellipse(26151.260320, 24833.645400, 863.488025, 863.488025, 0.000000, X, Y) && !ellipse(27184.462136, 23615.835600, 582.909617, 582.909617, 0.000000, X, Y) && !ellipse(27736.580400, 25620.022200, 762.346422, 762.346422, 0.000000, X, Y) && !ellipse(21377.885200, 23258.802360, 656.209619, 656.209619, 0.000000, X, Y) && !ellipse(21667.536600, 24925.920800, 799.929623, 799.929623, 0.000000, X, Y) && !ellipse(23969.826000, 23375.832000, 1275.728037, 1275.728037, 0.000000, X, Y) && !ellipse(27465.850037, 24751.831299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24024.021393, 22402.236572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22444.960800, 24127.785660, 965.904028, 965.904028, 0.000000, X, Y) && !ellipse(27619.840000, 26184.214000, 1150.880033, 1150.880033, 0.000000, X, Y) && !ellipse(26687.650330, 24046.366119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26204.234000, 24897.934000, 1002.808029, 1002.808029, 0.000000, X, Y) && !ellipse(28831.308000, 24796.394000, 1138.184033, 1138.184033, 0.000000, X, Y) && !ellipse(28359.126678, 26194.768036, 870.000000, 870.000000, 0.000000, X, Y) [Sun Jul 8 02:54:32 2012] Writing fullrun_mos1_xmm0550671101_pi300-10000_pass1_cl_src29.gif [Sun Jul 8 03:27:59 2012] Mean detx,y = (-362.45, -1724.30) [Sun Jul 8 03:28:00 2012] Setting backscal keywords in source and bgd. spectrum [Sun Jul 8 03:28:13 2012] Binned source spectrum to 10 counts/bin [Sun Jul 8 03:28:13 2012] Setting source spectrum file to fullrun_mos1_xmm0550671101_pi300-10000_pass1_cl_src29_src_b10.pi.gz [Sun Jul 8 03:28:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550671101_pi300-10000_pass1_cl_src29_bgd.pi.gz [Sun Jul 8 11:37:47 2012] Updating aperture counts using extracted products [Sun Jul 8 11:37:47 2012] Error reading totcts from fullrun_mos1_xmm0550671101_pi300-10000_pass1_cl_src29_src_b10.pi.gz [Sun Jul 8 11:37:48 2012] Calculating source flux in energy range 0.30-8.00 [Sun Jul 8 11:37:48 2012] Using photon index=1.80, rate=0.0131, arf fullrun_mos1_xmm0550671101_pi300-10000_pass1_cl_src29.arf [Sun Jul 8 11:37:48 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jul 8 11:37:48 2012] Updating source flux to 1.3e-13 [Sun Jul 8 11:37:50 2012] Flag b found in src. 29 procflags, skipping spectral fitting [Sun Jul 8 11:37:50 2012] Flag c found in src. 29 procflags, skipping spectral fitting