[Sat Jul  7 14:40:36 2012] Detection parameters:
  Position = (284.1, 279.7) = 18 52 38.53 0 40 19.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 615.5 +/- 34.6
  Background counts = 121.6
  Rate = 0.03 +/- 0.002

[Sat Jul  7 14:40:36 2012] Off-axis axis estimate = 1.71'
[Sat Jul  7 15:11:30 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat Jul  7 15:11:30 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Sat Jul  7 15:11:30 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Sat Jul  7 15:11:30 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.28"
[Sat Jul  7 18:00:59 2012] fullrun_mos1_xmm0550671101_pi300-10000_cl_pass0_src3.ximg exists
[Sat Jul  7 18:00:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671101_pi300-10000_cl_pass0_src3.csv
[Sat Jul  7 18:00:59 2012] fullrun_mos1_xmm0550671101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Jul  7 18:00:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671101_pi300-10000_cl_pass0_src3.csv
[Sat Jul  7 18:00:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550671101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550671101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul  7 18:01:00 2012] fullrun_mos1_xmm0550671101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Jul  7 18:01:00 2012] fullrun_mos1_xmm0550671101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Jul  7 18:01:00 2012] Fit fullrun_mos1_xmm0550671101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Jul  7 20:07:35 2012] Spatial fit model total counts = 2111.150000, observed total counts = 2112.000000
[Sat Jul  7 20:07:35 2012] Offset between fit and detection position for source 1 = 0.073246 pixels
[Sat Jul  7 20:07:35 2012] 2145.478000 total counts/ 1866.070000 bgd. counts: snr = 6.468072
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.073246 pixels
  Position = (284.1, 279.7) = 18 52 38.54 0 40 19.4
  Extent = 4.0 (3.4-4.5)", rotation angle = 0
  Source counts = 279.4 +/- 46.3
  Background counts = 1866.1
  Rate = 0.01 +/- 0.002
[Sat Jul  7 20:07:35 2012] Vigneting correction estimate = 1.000000
[Sat Jul  7 20:07:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul  7 20:07:35 2012] Assessing source extent using major axis lower bound
[Sat Jul  7 20:07:35 2012] Source does appear to be extended
[Sat Jul  7 20:07:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul  7 20:35:21 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul  7 20:35:21 2012] Initial guess for spatial extent in simple fitting = 4.02"
[Sat Jul  7 20:35:21 2012] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.109
[Sat Jul  7 20:35:21 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.02"
[Sat Jul  7 23:28:01 2012] fullrun_mos1_xmm0550671101_pi300-10000_cl_pass1_src3.ximg exists
[Sat Jul  7 23:28:01 2012] fullrun_mos1_xmm0550671101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Jul  7 23:28:01 2012] Fit fullrun_mos1_xmm0550671101_pi300-10000_cl_pass1_src3 appears to have run properly
[Sat Jul  7 23:28:02 2012] fullrun_mos1_xmm0550671101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Jul  7 23:28:02 2012] fullrun_mos1_xmm0550671101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Jul  7 23:28:02 2012] Fit fullrun_mos1_xmm0550671101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Jul  8 01:55:48 2012] Spatial fit model total counts = 2112.990000, observed total counts = 2112.000000
[Sun Jul  8 01:55:48 2012] Offset between fit and detection position for source 1 = 0.005676 pixels
[Sun Jul  8 01:55:48 2012] 2146.995000 total counts/ 1868.500000 bgd. counts: snr = 6.442744
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.005676 pixels
  Position = (284.1, 279.7) = 18 52 38.54 0 40 19.4
  Extent = 3.9 (3.5-4.4)", rotation angle = 0
  Source counts = 278.5 +/- 46.3
  Background counts = 1868.5
  Rate = 0.01 +/- 0.002
[Sun Jul  8 01:55:48 2012] Vigneting correction estimate = 1.000000
[Sun Jul  8 01:55:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul  8 01:55:48 2012] Assessing source extent using major axis lower bound
[Sun Jul  8 01:55:48 2012] Source does appear to be extended
[Sun Jul  8 01:55:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul  8 01:55:48 2012] Source is confused with source 2
[Sun Jul  8 01:55:48 2012] Source is confused with source 5
[Sun Jul  8 02:54:30 2012] XMMSAS src. selection expression = ellipse(24671.864600, 24283.679400, 236.746807, 236.746807, 0.000000, X, Y)
[Sun Jul  8 02:54:30 2012] Writing source region out to fullrun_mos1_xmm0550671101_pi300-10000_pass1_cl_src1_src.reg
[Sun Jul  8 02:54:30 2012] Extracting stamp from image fullrun_mos1_xmm0550671101_pi300-10000_cl_sm2.00.img.gz, (271, 266) - (298, 293)
[Sun Jul  8 02:54:30 2012] XMMSAS bgd. selection expression = annulus(24671.864600, 24283.679400, 394.578011, 789.156023, X, Y) && !ellipse(25432.254000, 21722.592000, 2172.224063, 1090.592031, 136.035000, X, Y) && !ellipse(25667.152000, 21923.548000, 2492.688072, 1130.504033, 319.310000, X, Y) && !ellipse(23763.940000, 23131.788000, 1294.576037, 1294.576037, 0.000000, X, Y) && !ellipse(22306.298200, 22808.680000, 1773.792051, 1773.792051, 0.000000, X, Y) && !ellipse(25968.114560, 23711.852600, 612.437618, 612.437618, 0.000000, X, Y) && !ellipse(22066.051481, 22853.428318, 2130.120061, 2085.890944, 90.000000, X, Y) && !ellipse(25587.408000, 24437.422000, 2177.472063, 2177.472063, 0.000000, X, Y) && !ellipse(26264.552000, 22323.898000, 1246.344036, 1246.344036, 0.000000, X, Y) && !ellipse(23367.936000, 22994.282000, 2551.456073, 2551.456073, 0.000000, X, Y) && !ellipse(26151.260320, 24833.645400, 863.488025, 863.488025, 0.000000, X, Y) && !ellipse(23969.826000, 23375.832000, 1275.728037, 1275.728037, 0.000000, X, Y) && !ellipse(26204.234000, 24897.934000, 1002.808029, 1002.808029, 0.000000, X, Y) && !ellipse(26227.556000, 24919.406778, 1726.976050, 776.310422, 143.282000, X, Y)
[Sun Jul  8 02:54:30 2012] Writing fullrun_mos1_xmm0550671101_pi300-10000_pass1_cl_src1.gif
[Sun Jul  8 02:54:48 2012] Mean detx,y = (280.30, -188.07) 
[Sun Jul  8 02:54:49 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul  8 02:54:53 2012] Binned source spectrum to 10 counts/bin
[Sun Jul  8 02:54:53 2012] Setting source spectrum file to fullrun_mos1_xmm0550671101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul  8 02:54:53 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550671101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jul  8 11:37:46 2012] Updating aperture counts using extracted products
[Sun Jul  8 11:37:46 2012] Error reading totcts from fullrun_mos1_xmm0550671101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul  8 11:37:47 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul  8 11:37:47 2012] Using photon index=1.80, rate=0.0144, arf fullrun_mos1_xmm0550671101_pi300-10000_pass1_cl_src1.arf
[Sun Jul  8 11:37:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul  8 11:37:47 2012] Updating source flux to 2e-13
[Sun Jul  8 11:37:50 2012] Flag c found in src. 1 procflags, skipping spectral fitting