[Fri Jul 27 18:16:33 2012] Detection parameters:
  Position = (285.9, 278.0) = 18 52 38.51 0 40 19.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1590.0 +/- 56.2
  Background counts = 315.7
  Rate = 0.08 +/- 0.003

[Fri Jul 27 18:16:33 2012] Off-axis axis estimate = 1.74'
[Fri Jul 27 18:26:04 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 18:26:04 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Fri Jul 27 18:26:04 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Fri Jul 27 18:26:04 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Fri Jul 27 19:11:20 2012] fullrun_pn_xmm0550671001_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 27 19:11:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550671001_pi300-10000_cl_pass0_src1.csv
[Fri Jul 27 19:11:20 2012] fullrun_pn_xmm0550671001_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 27 19:11:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550671001_pi300-10000_cl_pass0_src1.csv
[Fri Jul 27 19:11:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550671001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550671001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 19:11:21 2012] fullrun_pn_xmm0550671001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 27 19:11:21 2012] fullrun_pn_xmm0550671001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 27 19:11:21 2012] Fit fullrun_pn_xmm0550671001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jul 28 02:04:42 2012] Spatial fit model total counts = 6405.480000, observed total counts = 6406.000000
[Sat Jul 28 02:04:42 2012] Offset between fit and detection position for source 1 = 0.151356 pixels
[Sat Jul 28 02:04:42 2012] 6494.539000 total counts/ 5761.990000 bgd. counts: snr = 9.650514
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.151356 pixels
  Position = (285.8, 278.1) = 18 52 38.54 0 40 19.4
  Extent = 4.8 (4.4-5.2)", rotation angle = 0
  Source counts = 732.5 +/- 80.6
  Background counts = 5762.0
  Rate = 0.03 +/- 0.003
[Sat Jul 28 02:04:42 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 02:04:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 02:04:42 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 02:04:42 2012] Source does appear to be extended
[Sat Jul 28 02:04:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 02:04:42 2012] Source is confused with source 2
[Sat Jul 28 02:05:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 28 02:05:34 2012] Initial guess for spatial extent in simple fitting = 4.81"
[Sat Jul 28 02:05:34 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.163
[Sat Jul 28 02:05:34 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.81"
[Sat Jul 28 03:01:38 2012] fullrun_pn_xmm0550671001_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jul 28 03:01:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550671001_pi300-10000_cl_pass1_src1.csv
[Sat Jul 28 03:01:38 2012] fullrun_pn_xmm0550671001_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jul 28 03:01:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550671001_pi300-10000_cl_pass1_src1.csv
[Sat Jul 28 03:01:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550671001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550671001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 03:01:38 2012] fullrun_pn_xmm0550671001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jul 28 03:01:38 2012] fullrun_pn_xmm0550671001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jul 28 03:01:38 2012] Fit fullrun_pn_xmm0550671001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jul 28 10:50:52 2012] Warning, spatial fit 1 centroid is now closest to src. 14
[Sat Jul 28 10:50:53 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 10:50:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 10:50:53 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 10:50:53 2012] Source does appear to be extended
[Sat Jul 28 10:50:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 10:51:43 2012] XMMSAS src. selection expression = ellipse(24816.347920, 24141.877400, 288.778208, 288.778208, 0.000000, X, Y)
[Sat Jul 28 10:51:43 2012] Writing source region out to fullrun_pn_xmm0550671001_pi300-10000_pass1_cl_src1_src.reg
[Sat Jul 28 10:51:43 2012] Extracting stamp from image fullrun_pn_xmm0550671001_pi300-10000_cl_sm2.00.img.gz, (269, 261) - (302, 295)
[Sat Jul 28 10:51:43 2012] XMMSAS bgd. selection expression = annulus(24816.347920, 24141.877400, 481.297014, 962.594028, X, Y) && !ellipse(25579.134000, 24325.086000, 1118.736032, 1118.736032, 0.000000, X, Y) && !ellipse(25848.160000, 25790.260000, 1062.264031, 1062.264031, 0.000000, X, Y) && !ellipse(26355.142000, 24781.541800, 1118.560032, 1118.560032, 0.000000, X, Y) && !ellipse(26220.566956, 24141.827698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23672.729156, 23634.868439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25564.224000, 23674.624000, 1148.552033, 1148.552033, 0.000000, X, Y)
[Sat Jul 28 10:51:43 2012] Writing fullrun_pn_xmm0550671001_pi300-10000_pass1_cl_src1.gif
[Sat Jul 28 10:55:53 2012] Mean detx,y = (103.20, -267.77) 
[Sat Jul 28 10:56:06 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 10:56:19 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 10:56:19 2012] Setting source spectrum file to fullrun_pn_xmm0550671001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 28 10:56:19 2012] Setting bgd. spectrum file to fullrun_pn_xmm0550671001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jul 29 03:34:38 2012] Updating aperture counts using extracted products
[Sun Jul 29 03:34:38 2012] Error reading totcts from fullrun_pn_xmm0550671001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul 29 03:34:39 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 29 03:34:39 2012] Using photon index=1.80, rate=0.0267, arf fullrun_pn_xmm0550671001_pi300-10000_pass1_cl_src1.arf
[Sun Jul 29 03:34:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 29 03:34:39 2012] Updating source flux to 8.7e-14
[Sun Jul 29 03:47:53 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Sun Jul 29 03:49:03 2012] Reading fit data from xmm0550671001/analysis//spectral/fullrun_pn_xmm0550671001_pi300-10000_pass1_cl_src1_pl.csv
[Sun Jul 29 03:49:03 2012] Spectral fit parameter nH value = 2.79493e+22
[Sun Jul 29 03:49:03 2012] Spectral fit parameter PhoIndex value = 5.02755
[Sun Jul 29 03:49:03 2012] Failed to get F(0.3-8.0) from xmm0550671001/analysis//spectral/fullrun_pn_xmm0550671001_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Jul 29 03:49:03 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 29 03:49:03 2012] Using Nh = 2.8e+22, photon index=5.03, rate=0.0267, arf fullrun_pn_xmm0550671001_pi300-10000_pass1_cl_src1.arf
[Sun Jul 29 03:49:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 29 03:49:03 2012] Updating source flux to 1.2e-13