[Fri Jul 27 18:17:45 2012] Detection parameters:
  Position = (288.9, 254.8) = 18 52 37.65 0 38 41.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 151.4 +/- 22.7
  Background counts = 88.7
  Rate = 0.007 +/- 0.001

[Fri Jul 27 18:17:46 2012] Off-axis axis estimate = 3.24'
[Fri Jul 27 22:26:30 2012] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 22:26:30 2012] Initial guess for spatial extent in simple fitting = 8.05"
[Fri Jul 27 22:26:30 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.905
[Fri Jul 27 22:26:30 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 8.05"
[Sat Jul 28 02:04:35 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_src29.ximg exists
[Sat Jul 28 02:04:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_src29.csv
[Sat Jul 28 02:04:35 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_src29_1.ximg exists
[Sat Jul 28 02:04:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_src29.csv
[Sat Jul 28 02:04:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 02:04:37 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Sat Jul 28 02:04:37 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Sat Jul 28 02:04:37 2012] Fit fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Sat Jul 28 02:05:13 2012] Warning, spatial fit 29 centroid is now closest to src. 49
[Sat Jul 28 02:05:13 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 02:05:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 02:05:13 2012] Assessing source extent using major
[Sat Jul 28 02:05:13 2012] Source does appear to be extended
[Sat Jul 28 02:05:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 02:05:13 2012] Source is confused with source 13
[Sat Jul 28 06:45:08 2012] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 06:45:08 2012] Initial guess for spatial extent in simple fitting = 8.05"
[Sat Jul 28 06:45:08 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.905
[Sat Jul 28 06:45:08 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 8.05"
[Sat Jul 28 10:50:42 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_src29.ximg exists
[Sat Jul 28 10:50:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_src29.csv
[Sat Jul 28 10:50:42 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_src29_1.ximg exists
[Sat Jul 28 10:50:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_src29.csv
[Sat Jul 28 10:50:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 10:50:43 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sat Jul 28 10:50:43 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sat Jul 28 10:50:43 2012] Fit fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Sat Jul 28 10:51:26 2012] Source 54 is offset by -4.911725 and 5.367127 pixels which is larger than
2 X fitted extent = 4.792690 x 4.792690, not incorporating fit results
[Sat Jul 28 10:51:26 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 54 at 10.360985 pixels away
[Sat Jul 28 10:51:26 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 10:51:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 10:51:26 2012] Assessing source extent using major
[Sat Jul 28 10:51:26 2012] Source does appear to be extended
[Sat Jul 28 10:51:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 17:52:58 2012] XMMSAS src. selection expression = ellipse(25083.871918, 22116.104065, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 28 17:52:58 2012] Writing source region out to fullrun_mos2_xmm0550671001_pi300-10000_pass1_cl_src54_src.reg
[Sat Jul 28 17:52:58 2012] Extracting stamp from image fullrun_mos2_xmm0550671001_pi300-10000_cl_sm2.00.img.gz, (251, 217) - (326, 292)
[Sat Jul 28 17:52:58 2012] XMMSAS bgd. selection expression = annulus(25083.871918, 22116.104065, 1087.500000, 2175.000000, X, Y) && !ellipse(24821.714960, 24136.172000, 317.196009, 267.106408, 255.189000, X, Y) && !ellipse(25379.490000, 21542.282000, 2552.336073, 2552.336073, 0.000000, X, Y) && !ellipse(25174.730000, 21415.370000, 1316.816038, 1316.816038, 0.000000, X, Y) && !ellipse(26332.312000, 22261.218000, 623.355218, 623.355218, 0.000000, X, Y) && !ellipse(22607.719000, 21842.771200, 687.508820, 687.508820, 0.000000, X, Y) && !ellipse(22069.362000, 22614.836600, 1360.256039, 1360.256039, 0.000000, X, Y) && !ellipse(23903.715400, 20797.448600, 1394.256040, 1019.056029, 355.556000, X, Y) && !ellipse(23000.346640, 22240.860000, 1248.800036, 1248.800036, 0.000000, X, Y) && !ellipse(23442.068000, 21142.468000, 1373.024040, 1373.024040, 0.000000, X, Y) && !ellipse(25977.858000, 23595.523600, 866.056025, 866.056025, 0.000000, X, Y) && !ellipse(26997.978600, 22818.316000, 627.134418, 627.134418, 0.000000, X, Y) && !ellipse(22595.637400, 23317.862600, 1264.920036, 1264.920036, 0.000000, X, Y) && !ellipse(27062.417200, 23524.338400, 1054.024030, 1054.024030, 0.000000, X, Y) && !ellipse(26239.556000, 24743.510000, 1096.568032, 1096.568032, 0.000000, X, Y) && !ellipse(25090.384000, 24275.802000, 1277.120037, 1277.120037, 0.000000, X, Y) && !ellipse(26277.564000, 23368.488000, 1503.880043, 1503.880043, 0.000000, X, Y) && !ellipse(21678.517200, 22896.530000, 1244.176036, 1244.176036, 0.000000, X, Y) && !ellipse(27296.870000, 25938.744000, 1927.280055, 1927.280055, 0.000000, X, Y) && !ellipse(21845.045447, 24872.141791, 1309.880038, 733.001935, 87.883849, X, Y) && !ellipse(22559.091800, 23764.710200, 1286.064037, 1286.064037, 0.000000, X, Y) && !ellipse(21711.514000, 24451.526000, 1313.120038, 1313.120038, 0.000000, X, Y) && !ellipse(24594.962000, 22772.536000, 1282.408037, 1282.408037, 0.000000, X, Y) && !ellipse(27070.325012, 24302.247223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28379.882000, 26038.658000, 2193.344063, 1542.464044, 123.547000, X, Y) && !ellipse(25030.232361, 24866.233856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21635.578000, 20457.032000, 1457.240042, 1457.240042, 0.000000, X, Y)
[Sat Jul 28 17:52:58 2012] Writing fullrun_mos2_xmm0550671001_pi300-10000_pass1_cl_src54.gif
[Sat Jul 28 18:11:41 2012] Mean detx,y = (303.26, 2238.48) 
[Sat Jul 28 18:11:42 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 18:11:51 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 18:11:51 2012] Setting source spectrum file to fullrun_mos2_xmm0550671001_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Sat Jul 28 18:11:51 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550671001_pi300-10000_pass1_cl_src54_bgd.pi.gz
[Sun Jul 29 02:35:57 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 29 02:35:57 2012] rmf not generated due to insufficient counts
[Sun Jul 29 03:34:41 2012] Updating aperture counts using extracted products
[Sun Jul 29 03:34:41 2012] Error reading totcts from fullrun_mos2_xmm0550671001_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Sun Jul 29 03:34:41 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 29 03:34:41 2012] Using photon index=1.80, rate=0.00732, arf fullrun_mos2_xmm0550671001_pi300-10000_pass1_cl_src54.arf
[Sun Jul 29 03:34:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 29 03:34:41 2012] Updating source flux to 8.7e-14
[Sun Jul 29 03:39:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting