[Fri Jul 27 18:17:45 2012] Detection parameters:
  Position = (229.3, 259.4) = 18 52 54.92 0 38 58.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.7 +/- 16.5
  Background counts = 56.9
  Rate = 0.004 +/- 0.0007

[Fri Jul 27 18:17:46 2012] Off-axis axis estimate = 5.75'
[Fri Jul 27 22:26:30 2012] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 22:26:30 2012] Initial guess for spatial extent in simple fitting = 9.31"
[Fri Jul 27 22:26:30 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.897
[Fri Jul 27 22:26:30 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 9.31"
[Sat Jul 28 02:04:35 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_src45.ximg exists
[Sat Jul 28 02:04:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_src45.csv
[Sat Jul 28 02:04:35 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_src45_1.ximg exists
[Sat Jul 28 02:04:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_src45.csv
[Sat Jul 28 02:04:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 02:04:37 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Sat Jul 28 02:04:37 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Sat Jul 28 02:04:37 2012] Fit fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Sat Jul 28 02:05:13 2012] Warning: source 45 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 53 at 12.322765 pixels away
[Sat Jul 28 02:05:13 2012] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 53 at 10.325830 pixels away
[Sat Jul 28 02:05:13 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 02:05:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 02:05:13 2012] Assessing source extent using major
[Sat Jul 28 02:05:13 2012] Source does appear to be extended
[Sat Jul 28 02:05:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 06:45:08 2012] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 06:45:08 2012] Initial guess for spatial extent in simple fitting = 9.31"
[Sat Jul 28 06:45:08 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.897
[Sat Jul 28 06:45:08 2012] Giving source the simple spatial ID 44 for pass 1, mean size = 9.31"
[Sat Jul 28 10:50:42 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_src44.ximg exists
[Sat Jul 28 10:50:42 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_src44_1.ximg exists
[Sat Jul 28 10:50:42 2012] Fit fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_src44 appears to have run properly
[Sat Jul 28 10:50:44 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Sat Jul 28 10:50:44 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Sat Jul 28 10:50:44 2012] Fit fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_tfrozen_src44 appears to have run properly
[Sat Jul 28 10:51:26 2012] Warning, spatial fit 44 centroid is now closest to src. 55
[Sat Jul 28 10:51:26 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 10:51:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 10:51:26 2012] Assessing source extent using major
[Sat Jul 28 10:51:26 2012] Source does appear to be extended
[Sat Jul 28 10:51:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 17:52:59 2012] XMMSAS src. selection expression = ellipse(19904.487228, 22516.668335, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 28 17:52:59 2012] Writing source region out to fullrun_mos2_xmm0550671001_pi300-10000_pass1_cl_src53_src.reg
[Sat Jul 28 17:52:59 2012] Extracting stamp from image fullrun_mos2_xmm0550671001_pi300-10000_cl_sm2.00.img.gz, (192, 222) - (267, 297)
[Sat Jul 28 17:52:59 2012] XMMSAS bgd. selection expression = annulus(19904.487228, 22516.668335, 1087.500000, 2175.000000, X, Y) && !ellipse(22607.719000, 21842.771200, 687.508820, 687.508820, 0.000000, X, Y) && !ellipse(22069.362000, 22614.836600, 1360.256039, 1360.256039, 0.000000, X, Y) && !ellipse(23000.346640, 22240.860000, 1248.800036, 1248.800036, 0.000000, X, Y) && !ellipse(23442.068000, 21142.468000, 1373.024040, 1373.024040, 0.000000, X, Y) && !ellipse(22595.637400, 23317.862600, 1264.920036, 1264.920036, 0.000000, X, Y) && !ellipse(21678.517200, 22896.530000, 1244.176036, 1244.176036, 0.000000, X, Y) && !ellipse(20057.985840, 23477.506000, 478.580814, 478.580814, 0.000000, X, Y) && !ellipse(21845.045447, 24872.141791, 1309.880038, 733.001935, 87.883849, X, Y) && !ellipse(22559.091800, 23764.710200, 1286.064037, 1286.064037, 0.000000, X, Y) && !ellipse(19510.559860, 25168.270800, 718.116021, 718.116021, 0.000000, X, Y) && !ellipse(21711.514000, 24451.526000, 1313.120038, 1313.120038, 0.000000, X, Y) && !ellipse(21458.347400, 23213.236000, 886.312026, 886.312026, 0.000000, X, Y) && !ellipse(21717.406000, 26277.062000, 1784.264051, 860.792025, 104.927000, X, Y) && !ellipse(19411.940800, 24062.904000, 682.670420, 682.670420, 0.000000, X, Y) && !ellipse(21635.578000, 20457.032000, 1457.240042, 1457.240042, 0.000000, X, Y) && !ellipse(19334.492400, 24392.738000, 555.189616, 555.189616, 0.000000, X, Y) && !ellipse(20030.151200, 21724.468800, 777.086422, 777.086422, 0.000000, X, Y) && !ellipse(20065.193600, 23846.574000, 1435.200041, 349.067210, 87.729000, X, Y)
[Sat Jul 28 17:52:59 2012] Writing fullrun_mos2_xmm0550671001_pi300-10000_pass1_cl_src53.gif
[Sat Jul 28 18:17:50 2012] Mean detx,y = (-4858.22, 1519.12) 
[Sat Jul 28 18:17:50 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 18:18:09 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 18:18:09 2012] Setting source spectrum file to fullrun_mos2_xmm0550671001_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Sat Jul 28 18:18:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550671001_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Sun Jul 29 03:23:23 2012] Not generating rmf since there are only 92 counts
[Sun Jul 29 03:23:23 2012] rmf not generated due to insufficient counts
[Sun Jul 29 03:34:41 2012] Updating aperture counts using extracted products
[Sun Jul 29 03:34:41 2012] Error reading totcts from fullrun_mos2_xmm0550671001_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Sun Jul 29 03:34:41 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 29 03:34:41 2012] Using photon index=1.80, rate=0.00405, arf fullrun_mos2_xmm0550671001_pi300-10000_pass1_cl_src53.arf
[Sun Jul 29 03:34:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 29 03:34:41 2012] Updating source flux to 5.2e-14
[Sun Jul 29 03:39:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting