[Fri Jul 27 18:17:45 2012] Detection parameters:
  Position = (260.8, 274.9) = 18 52 45.79 0 40 6.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 206.8 +/- 25.1
  Background counts = 133.5
  Rate = 0.008 +/- 0.001

[Fri Jul 27 18:17:46 2012] Off-axis axis estimate = 3.22'
[Fri Jul 27 22:26:30 2012] Using EEF radius (= 8.04 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 22:26:30 2012] Initial guess for spatial extent in simple fitting = 8.04"
[Fri Jul 27 22:26:30 2012] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.907
[Fri Jul 27 22:26:30 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 8.04"
[Sat Jul 28 02:04:35 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_src27.ximg exists
[Sat Jul 28 02:04:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_src27.csv
[Sat Jul 28 02:04:35 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_src27_1.ximg exists
[Sat Jul 28 02:04:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_src27.csv
[Sat Jul 28 02:04:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 02:04:36 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sat Jul 28 02:04:36 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sat Jul 28 02:04:37 2012] Fit fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Sat Jul 28 02:05:13 2012] Spatial fit model total counts = 3036.170000, observed total counts = 3028.000000
[Sat Jul 28 02:05:13 2012] Offset between fit and detection position for source 45 = 4.353240 pixels
[Sat Jul 28 02:05:13 2012] Warning, changing simple spatial fit ID from 27 to 13
[Sat Jul 28 02:05:13 2012] 2847.025000 total counts/ 2417.410000 bgd. counts: snr = 8.737844
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 4.353240 pixels
  Position = (258.9, 271.0) = 18 52 46.33 0 39 48.6
  Extent = 16.5 (16.5-33.0)", rotation angle = 0
  Source counts = 429.6 +/- 53.4
  Background counts = 2417.4
  Rate = 0.02 +/- 0.002
[Sat Jul 28 02:05:13 2012] Spatial fit model total counts = 2180.750000, observed total counts = 2179.000000
[Sat Jul 28 02:05:13 2012] Offset between fit and detection position for source 45 = 2.907019 pixels
[Sat Jul 28 02:05:13 2012] Warning, changing simple spatial fit ID from 13 to 27
[Sat Jul 28 02:05:13 2012] 2098.119000 total counts/ 1681.240000 bgd. counts: snr = 10.167055
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 2.907019 pixels
  Position = (259.9, 273.7) = 18 52 46.07 0 40 0.6
  Extent = 16.1 (14.8-32.2)", rotation angle = 0
  Source counts = 416.9 +/- 45.8
  Background counts = 1681.2
  Rate = 0.02 +/- 0.002
[Sat Jul 28 02:05:13 2012] Spatial fit model total counts = 1441.090000, observed total counts = 2212.000000
[Sat Jul 28 02:05:13 2012] Poor agreement between spatial fit and data for source 45
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jul 28 02:05:13 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 02:05:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 02:05:13 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 02:05:13 2012] Source does appear to be extended
[Sat Jul 28 02:05:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 02:05:13 2012] Source is confused with source 6
[Sat Jul 28 06:45:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 28 06:45:08 2012] Initial guess for spatial extent in simple fitting = 16.08"
[Sat Jul 28 06:45:08 2012] source mask rpix=3.7, npix_max = 70, mask sum = 64, frac = 0.909
[Sat Jul 28 06:45:08 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 16.08"
[Sat Jul 28 10:50:42 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_src27.ximg exists
[Sat Jul 28 10:50:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_src27.csv
[Sat Jul 28 10:50:42 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_src27_1.ximg exists
[Sat Jul 28 10:50:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_src27.csv
[Sat Jul 28 10:50:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 10:50:43 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sat Jul 28 10:50:43 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sat Jul 28 10:50:43 2012] Fit fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Sat Jul 28 10:51:26 2012] Warning, spatial fit 27 centroid is now closest to src. 51
[Sat Jul 28 10:51:26 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 10:51:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 10:51:26 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 10:51:26 2012] Source does appear to be extended
[Sat Jul 28 10:51:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 17:52:58 2012] XMMSAS src. selection expression = ellipse(22559.091800, 23764.710200, 964.548028, 964.548028, 0.000000, X, Y)
[Sat Jul 28 17:52:58 2012] Writing source region out to fullrun_mos2_xmm0550671001_pi300-10000_pass1_cl_src45_src.reg
[Sat Jul 28 17:52:58 2012] Extracting stamp from image fullrun_mos2_xmm0550671001_pi300-10000_cl_sm2.00.img.gz, (204, 218) - (315, 329)
[Sat Jul 28 17:52:58 2012] XMMSAS bgd. selection expression = annulus(22559.091800, 23764.710200, 1607.580046, 3215.160093, X, Y) && !ellipse(24821.714960, 24136.172000, 317.196009, 267.106408, 255.189000, X, Y) && !ellipse(25379.490000, 21542.282000, 2552.336073, 2552.336073, 0.000000, X, Y) && !ellipse(25174.730000, 21415.370000, 1316.816038, 1316.816038, 0.000000, X, Y) && !ellipse(26332.312000, 22261.218000, 623.355218, 623.355218, 0.000000, X, Y) && !ellipse(22607.719000, 21842.771200, 687.508820, 687.508820, 0.000000, X, Y) && !ellipse(22069.362000, 22614.836600, 1360.256039, 1360.256039, 0.000000, X, Y) && !ellipse(23903.715400, 20797.448600, 1394.256040, 1019.056029, 355.556000, X, Y) && !ellipse(23000.346640, 22240.860000, 1248.800036, 1248.800036, 0.000000, X, Y) && !ellipse(23442.068000, 21142.468000, 1373.024040, 1373.024040, 0.000000, X, Y) && !ellipse(25977.858000, 23595.523600, 866.056025, 866.056025, 0.000000, X, Y) && !ellipse(22595.637400, 23317.862600, 1264.920036, 1264.920036, 0.000000, X, Y) && !ellipse(26239.556000, 24743.510000, 1096.568032, 1096.568032, 0.000000, X, Y) && !ellipse(25090.384000, 24275.802000, 1277.120037, 1277.120037, 0.000000, X, Y) && !ellipse(26277.564000, 23368.488000, 1503.880043, 1503.880043, 0.000000, X, Y) && !ellipse(21678.517200, 22896.530000, 1244.176036, 1244.176036, 0.000000, X, Y) && !ellipse(27296.870000, 25938.744000, 1927.280055, 1927.280055, 0.000000, X, Y) && !ellipse(24777.371200, 26721.670200, 1330.728038, 621.600818, 352.230890, X, Y) && !ellipse(20057.985840, 23477.506000, 478.580814, 478.580814, 0.000000, X, Y) && !ellipse(24860.390000, 26721.838600, 1106.632032, 1106.632032, 0.000000, X, Y) && !ellipse(21845.045447, 24872.141791, 1309.880038, 733.001935, 87.883849, X, Y) && !ellipse(25083.871918, 22116.104065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19510.559860, 25168.270800, 718.116021, 718.116021, 0.000000, X, Y) && !ellipse(21711.514000, 24451.526000, 1313.120038, 1313.120038, 0.000000, X, Y) && !ellipse(21458.347400, 23213.236000, 886.312026, 886.312026, 0.000000, X, Y) && !ellipse(24594.962000, 22772.536000, 1282.408037, 1282.408037, 0.000000, X, Y) && !ellipse(21717.406000, 26277.062000, 1784.264051, 860.792025, 104.927000, X, Y) && !ellipse(19411.940800, 24062.904000, 682.670420, 682.670420, 0.000000, X, Y) && !ellipse(25030.232361, 24866.233856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25712.594000, 26027.572000, 1073.096031, 671.280819, 45.318000, X, Y) && !ellipse(21635.578000, 20457.032000, 1457.240042, 1457.240042, 0.000000, X, Y) && !ellipse(19334.492400, 24392.738000, 555.189616, 555.189616, 0.000000, X, Y) && !ellipse(19904.487228, 22516.668335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26355.487579, 25876.130005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20030.151200, 21724.468800, 777.086422, 777.086422, 0.000000, X, Y) && !ellipse(21960.726800, 26872.878000, 1296.464037, 1296.464037, 0.000000, X, Y) && !ellipse(20065.193600, 23846.574000, 1435.200041, 349.067210, 87.729000, X, Y)
[Sat Jul 28 17:52:58 2012] Writing fullrun_mos2_xmm0550671001_pi300-10000_pass1_cl_src45.gif
[Sat Jul 28 18:11:12 2012] Mean detx,y = (-2258.02, 535.44) 
[Sat Jul 28 18:11:13 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 18:11:25 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 18:11:25 2012] Setting source spectrum file to fullrun_mos2_xmm0550671001_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Sat Jul 28 18:11:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550671001_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Sun Jul 29 03:34:41 2012] Updating aperture counts using extracted products
[Sun Jul 29 03:34:41 2012] Error reading totcts from fullrun_mos2_xmm0550671001_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Sun Jul 29 03:34:41 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 29 03:34:41 2012] Using photon index=1.80, rate=0.0151, arf fullrun_mos2_xmm0550671001_pi300-10000_pass1_cl_src45.arf
[Sun Jul 29 03:34:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 29 03:34:41 2012] Updating source flux to 1.4e-13
[Sun Jul 29 03:39:53 2012] Flag p found in src. 45 procflags, skipping spectral fitting
[Sun Jul 29 03:39:53 2012] Flag c found in src. 45 procflags, skipping spectral fitting