[Fri Jul 27 18:17:45 2012] Detection parameters:
  Position = (302.5, 284.9) = 18 52 33.70 0 40 49.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 291.2 +/- 27.2
  Background counts = 100.1
  Rate = 0.01 +/- 0.001

[Fri Jul 27 18:17:46 2012] Off-axis axis estimate = 1.02'
[Fri Jul 27 22:26:30 2012] Using EEF radius (= 6.94 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 22:26:30 2012] Initial guess for spatial extent in simple fitting = 6.94"
[Fri Jul 27 22:26:30 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.139
[Fri Jul 27 22:26:30 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 6.94"
[Sat Jul 28 02:04:35 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_src15.ximg exists
[Sat Jul 28 02:04:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_src15.csv
[Sat Jul 28 02:04:35 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_src15_1.ximg exists
[Sat Jul 28 02:04:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_src15.csv
[Sat Jul 28 02:04:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 02:04:36 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sat Jul 28 02:04:36 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sat Jul 28 02:04:36 2012] Fit fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sat Jul 28 02:05:13 2012] Spatial fit model total counts = 2137.680000, observed total counts = 2122.000000
[Sat Jul 28 02:05:13 2012] Offset between fit and detection position for source 38 = 0.377687 pixels
[Sat Jul 28 02:05:13 2012] 2089.515000 total counts/ 1896.090000 bgd. counts: snr = 4.442047
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.377687 pixels
  Position = (302.2, 285.1) = 18 52 33.80 0 40 50.0
  Extent = 10.5 (6.4-13.9)", rotation angle = 0
  Source counts = 193.4 +/- 45.7
  Background counts = 1896.1
  Rate = 0.007 +/- 0.002
[Sat Jul 28 02:05:13 2012] Spatial fit model total counts = 1905.960000, observed total counts = 1905.000000
[Sat Jul 28 02:05:13 2012] Offset between fit and detection position for source 38 = 0.118425 pixels
[Sat Jul 28 02:05:13 2012] Warning, changing simple spatial fit ID from 15 to 28
[Sat Jul 28 02:05:13 2012] 1916.321000 total counts/ 1505.500000 bgd. counts: snr = 10.587959
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.118425 pixels
  Position = (302.2, 285.0) = 18 52 33.80 0 40 49.5
  Extent = 13.7 (13.7-27.4)", rotation angle = 0
  Source counts = 410.8 +/- 43.8
  Background counts = 1505.5
  Rate = 0.01 +/- 0.002
[Sat Jul 28 02:05:13 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 02:05:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 02:05:13 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 02:05:13 2012] Source does appear to be extended
[Sat Jul 28 02:05:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 06:45:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 28 06:45:08 2012] Initial guess for spatial extent in simple fitting = 13.71"
[Sat Jul 28 06:45:08 2012] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.050
[Sat Jul 28 06:45:08 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 13.71"
[Sat Jul 28 10:50:41 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_src15.ximg exists
[Sat Jul 28 10:50:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_src15.csv
[Sat Jul 28 10:50:41 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_src15_1.ximg exists
[Sat Jul 28 10:50:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_src15.csv
[Sat Jul 28 10:50:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 10:50:43 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sat Jul 28 10:50:43 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sat Jul 28 10:50:43 2012] Fit fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sat Jul 28 10:51:26 2012] Warning, spatial fit 15 centroid is now closest to src. 44
[Sat Jul 28 10:51:26 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 10:51:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 10:51:26 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 10:51:26 2012] Source does appear to be extended
[Sat Jul 28 10:51:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 17:52:58 2012] XMMSAS src. selection expression = ellipse(26239.556000, 24743.510000, 822.426024, 822.426024, 0.000000, X, Y)
[Sat Jul 28 17:52:58 2012] Writing source region out to fullrun_mos2_xmm0550671001_pi300-10000_pass1_cl_src38_src.reg
[Sat Jul 28 17:52:58 2012] Extracting stamp from image fullrun_mos2_xmm0550671001_pi300-10000_cl_sm2.00.img.gz, (255, 238) - (349, 332)
[Sat Jul 28 17:52:58 2012] XMMSAS bgd. selection expression = annulus(26239.556000, 24743.510000, 1370.710039, 2741.420079, X, Y) && !ellipse(24821.714960, 24136.172000, 317.196009, 267.106408, 255.189000, X, Y) && !ellipse(25379.490000, 21542.282000, 2552.336073, 2552.336073, 0.000000, X, Y) && !ellipse(25174.730000, 21415.370000, 1316.816038, 1316.816038, 0.000000, X, Y) && !ellipse(26332.312000, 22261.218000, 623.355218, 623.355218, 0.000000, X, Y) && !ellipse(23903.715400, 20797.448600, 1394.256040, 1019.056029, 355.556000, X, Y) && !ellipse(23000.346640, 22240.860000, 1248.800036, 1248.800036, 0.000000, X, Y) && !ellipse(23442.068000, 21142.468000, 1373.024040, 1373.024040, 0.000000, X, Y) && !ellipse(25977.858000, 23595.523600, 866.056025, 866.056025, 0.000000, X, Y) && !ellipse(26997.978600, 22818.316000, 627.134418, 627.134418, 0.000000, X, Y) && !ellipse(22595.637400, 23317.862600, 1264.920036, 1264.920036, 0.000000, X, Y) && !ellipse(27062.417200, 23524.338400, 1054.024030, 1054.024030, 0.000000, X, Y) && !ellipse(25090.384000, 24275.802000, 1277.120037, 1277.120037, 0.000000, X, Y) && !ellipse(26277.564000, 23368.488000, 1503.880043, 1503.880043, 0.000000, X, Y) && !ellipse(27296.870000, 25938.744000, 1927.280055, 1927.280055, 0.000000, X, Y) && !ellipse(24777.371200, 26721.670200, 1330.728038, 621.600818, 352.230890, X, Y) && !ellipse(27907.877000, 25491.870200, 1167.752034, 1167.752034, 0.000000, X, Y) && !ellipse(24860.390000, 26721.838600, 1106.632032, 1106.632032, 0.000000, X, Y) && !ellipse(27462.052200, 26677.274200, 1142.184033, 1142.184033, 0.000000, X, Y) && !ellipse(22559.091800, 23764.710200, 1286.064037, 1286.064037, 0.000000, X, Y) && !ellipse(26841.510000, 25435.490000, 1014.400029, 1014.400029, 0.000000, X, Y) && !ellipse(25083.871918, 22116.104065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24594.962000, 22772.536000, 1282.408037, 1282.408037, 0.000000, X, Y) && !ellipse(21717.406000, 26277.062000, 1784.264051, 860.792025, 104.927000, X, Y) && !ellipse(27070.325012, 24302.247223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28864.180000, 24860.218000, 1220.904035, 1220.904035, 0.000000, X, Y) && !ellipse(28379.882000, 26038.658000, 2193.344063, 1542.464044, 123.547000, X, Y) && !ellipse(25030.232361, 24866.233856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25712.594000, 26027.572000, 1073.096031, 671.280819, 45.318000, X, Y) && !ellipse(26355.487579, 25876.130005, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 28 17:52:58 2012] Writing fullrun_mos2_xmm0550671001_pi300-10000_pass1_cl_src38.gif
[Sat Jul 28 18:08:07 2012] Mean detx,y = (1446.95, -413.29) 
[Sat Jul 28 18:08:08 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 18:08:14 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 18:08:14 2012] Setting source spectrum file to fullrun_mos2_xmm0550671001_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Sat Jul 28 18:08:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550671001_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Sun Jul 29 03:34:40 2012] Updating aperture counts using extracted products
[Sun Jul 29 03:34:40 2012] Error reading totcts from fullrun_mos2_xmm0550671001_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Sun Jul 29 03:34:41 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 29 03:34:41 2012] Using photon index=1.80, rate=0.0149, arf fullrun_mos2_xmm0550671001_pi300-10000_pass1_cl_src38.arf
[Sun Jul 29 03:34:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 29 03:34:41 2012] Updating source flux to 1.6e-13