[Fri Jul 27 18:17:44 2012] Detection parameters:
  Position = (288.3, 286.4) = 18 52 37.83 0 40 56.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106.9 +/- 21.4
  Background counts = 110.5
  Rate = 0.005 +/- 0.001

[Fri Jul 27 18:17:46 2012] Off-axis axis estimate = 1.14'
[Fri Jul 27 22:26:30 2012] Using EEF radius (= 7.00 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 22:26:30 2012] Initial guess for spatial extent in simple fitting = 7.00"
[Fri Jul 27 22:26:30 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.899
[Fri Jul 27 22:26:30 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 7.00"
[Sat Jul 28 02:04:35 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_src40.ximg exists
[Sat Jul 28 02:04:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_src40.csv
[Sat Jul 28 02:04:35 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_src40_1.ximg exists
[Sat Jul 28 02:04:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_src40.csv
[Sat Jul 28 02:04:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 02:04:37 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Sat Jul 28 02:04:37 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Sat Jul 28 02:04:37 2012] Fit fullrun_mos2_xmm0550671001_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly
[Sat Jul 28 02:05:13 2012] Source 34 is offset by 6.698602 and -4.157795 pixels which is larger than
2 X fitted extent = 5.826805 x 5.826805, not incorporating fit results
[Sat Jul 28 02:05:13 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 02:05:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 02:05:13 2012] Assessing source extent using major
[Sat Jul 28 02:05:13 2012] Source does appear to be extended
[Sat Jul 28 02:05:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 06:45:08 2012] Using EEF radius (= 7.00 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 06:45:08 2012] Initial guess for spatial extent in simple fitting = 7.00"
[Sat Jul 28 06:45:08 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.899
[Sat Jul 28 06:45:08 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 7.00"
[Sat Jul 28 10:50:42 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_src39.ximg exists
[Sat Jul 28 10:50:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_src39.csv
[Sat Jul 28 10:50:42 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_src39_1.ximg exists
[Sat Jul 28 10:50:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_src39.csv
[Sat Jul 28 10:50:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 10:50:44 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Sat Jul 28 10:50:44 2012] fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Sat Jul 28 10:50:44 2012] Fit fullrun_mos2_xmm0550671001_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Sat Jul 28 10:51:26 2012] Source 34 is offset by 2.186360 and 6.543306 pixels which is larger than
2 X fitted extent = 3.358060 x 3.358060, not incorporating fit results
[Sat Jul 28 10:51:26 2012] Source 34 is offset by 6.698602 and -4.173496 pixels which is larger than
2 X fitted extent = 5.688874 x 5.688874, not incorporating fit results
[Sat Jul 28 10:51:26 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 10:51:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 10:51:26 2012] Assessing source extent using major
[Sat Jul 28 10:51:26 2012] Source does appear to be extended
[Sat Jul 28 10:51:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 10:51:26 2012] Source is confused with source 44
[Sat Jul 28 17:52:59 2012] XMMSAS src. selection expression = ellipse(25030.232361, 24866.233856, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 28 17:52:59 2012] Writing source region out to fullrun_mos2_xmm0550671001_pi300-10000_pass1_cl_src34_src.reg
[Sat Jul 28 17:52:59 2012] Extracting stamp from image fullrun_mos2_xmm0550671001_pi300-10000_cl_sm2.00.img.gz, (251, 249) - (326, 324)
[Sat Jul 28 17:52:59 2012] XMMSAS bgd. selection expression = annulus(25030.232361, 24866.233856, 1087.500000, 2175.000000, X, Y) && !ellipse(24821.714960, 24136.172000, 317.196009, 267.106408, 255.189000, X, Y) && !ellipse(25379.490000, 21542.282000, 2552.336073, 2552.336073, 0.000000, X, Y) && !ellipse(25174.730000, 21415.370000, 1316.816038, 1316.816038, 0.000000, X, Y) && !ellipse(26332.312000, 22261.218000, 623.355218, 623.355218, 0.000000, X, Y) && !ellipse(22069.362000, 22614.836600, 1360.256039, 1360.256039, 0.000000, X, Y) && !ellipse(23000.346640, 22240.860000, 1248.800036, 1248.800036, 0.000000, X, Y) && !ellipse(25977.858000, 23595.523600, 866.056025, 866.056025, 0.000000, X, Y) && !ellipse(26997.978600, 22818.316000, 627.134418, 627.134418, 0.000000, X, Y) && !ellipse(22595.637400, 23317.862600, 1264.920036, 1264.920036, 0.000000, X, Y) && !ellipse(27062.417200, 23524.338400, 1054.024030, 1054.024030, 0.000000, X, Y) && !ellipse(26239.556000, 24743.510000, 1096.568032, 1096.568032, 0.000000, X, Y) && !ellipse(25090.384000, 24275.802000, 1277.120037, 1277.120037, 0.000000, X, Y) && !ellipse(26277.564000, 23368.488000, 1503.880043, 1503.880043, 0.000000, X, Y) && !ellipse(21678.517200, 22896.530000, 1244.176036, 1244.176036, 0.000000, X, Y) && !ellipse(27296.870000, 25938.744000, 1927.280055, 1927.280055, 0.000000, X, Y) && !ellipse(24777.371200, 26721.670200, 1330.728038, 621.600818, 352.230890, X, Y) && !ellipse(27907.877000, 25491.870200, 1167.752034, 1167.752034, 0.000000, X, Y) && !ellipse(24860.390000, 26721.838600, 1106.632032, 1106.632032, 0.000000, X, Y) && !ellipse(27462.052200, 26677.274200, 1142.184033, 1142.184033, 0.000000, X, Y) && !ellipse(21845.045447, 24872.141791, 1309.880038, 733.001935, 87.883849, X, Y) && !ellipse(22559.091800, 23764.710200, 1286.064037, 1286.064037, 0.000000, X, Y) && !ellipse(26841.510000, 25435.490000, 1014.400029, 1014.400029, 0.000000, X, Y) && !ellipse(25083.871918, 22116.104065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21711.514000, 24451.526000, 1313.120038, 1313.120038, 0.000000, X, Y) && !ellipse(24594.962000, 22772.536000, 1282.408037, 1282.408037, 0.000000, X, Y) && !ellipse(21717.406000, 26277.062000, 1784.264051, 860.792025, 104.927000, X, Y) && !ellipse(27070.325012, 24302.247223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28379.882000, 26038.658000, 2193.344063, 1542.464044, 123.547000, X, Y) && !ellipse(25712.594000, 26027.572000, 1073.096031, 671.280819, 45.318000, X, Y) && !ellipse(26355.487579, 25876.130005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21960.726800, 26872.878000, 1296.464037, 1296.464037, 0.000000, X, Y)
[Sat Jul 28 17:52:59 2012] Writing fullrun_mos2_xmm0550671001_pi300-10000_pass1_cl_src34.gif
[Sat Jul 28 18:16:03 2012] Mean detx,y = (297.24, -492.13) 
[Sat Jul 28 18:16:04 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 18:16:13 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 18:16:13 2012] Setting source spectrum file to fullrun_mos2_xmm0550671001_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Sat Jul 28 18:16:13 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550671001_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Sun Jul 29 03:16:08 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 29 03:16:08 2012] rmf not generated due to insufficient counts
[Sun Jul 29 03:34:41 2012] Updating aperture counts using extracted products
[Sun Jul 29 03:34:41 2012] Error reading totcts from fullrun_mos2_xmm0550671001_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Sun Jul 29 03:34:41 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 29 03:34:41 2012] Using photon index=1.80, rate=0.00483, arf fullrun_mos2_xmm0550671001_pi300-10000_pass1_cl_src34.arf
[Sun Jul 29 03:34:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 29 03:34:41 2012] Updating source flux to 6e-14
[Sun Jul 29 03:39:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting