[Fri Jul 27 18:17:05 2012] Detection parameters:
  Position = (255.2, 240.0) = 18 52 47.42 0 37 27.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.7 +/- 19.2
  Background counts = 69.6
  Rate = 0.005 +/- 0.0008

[Fri Jul 27 18:17:05 2012] Off-axis axis estimate = 5.27'
[Fri Jul 27 19:11:21 2012] Using EEF radius (= 9.06 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 19:11:21 2012] Initial guess for spatial extent in simple fitting = 9.06"
[Fri Jul 27 19:11:21 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.936
[Fri Jul 27 19:11:21 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 9.06"
[Fri Jul 27 22:26:28 2012] fullrun_mos1_xmm0550671001_pi300-10000_cl_pass0_src37.ximg exists
[Fri Jul 27 22:26:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671001_pi300-10000_cl_pass0_src37.csv
[Fri Jul 27 22:26:28 2012] fullrun_mos1_xmm0550671001_pi300-10000_cl_pass0_src37_1.ximg exists
[Fri Jul 27 22:26:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671001_pi300-10000_cl_pass0_src37.csv
[Fri Jul 27 22:26:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550671001_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550671001_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 22:26:30 2012] fullrun_mos1_xmm0550671001_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Fri Jul 27 22:26:30 2012] fullrun_mos1_xmm0550671001_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Fri Jul 27 22:26:30 2012] Fit fullrun_mos1_xmm0550671001_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Sat Jul 28 02:04:57 2012] Warning, spatial fit 37 centroid is now closest to src. 4
[Sat Jul 28 02:04:57 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 02:04:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 02:04:57 2012] Assessing source extent using major
[Sat Jul 28 02:04:57 2012] Source does appear to be extended
[Sat Jul 28 02:04:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 03:01:39 2012] Using EEF radius (= 9.06 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 03:01:39 2012] Initial guess for spatial extent in simple fitting = 9.06"
[Sat Jul 28 03:01:39 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.936
[Sat Jul 28 03:01:39 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 9.06"
[Sat Jul 28 06:45:06 2012] fullrun_mos1_xmm0550671001_pi300-10000_cl_pass1_src35.ximg exists
[Sat Jul 28 06:45:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671001_pi300-10000_cl_pass1_src35.csv
[Sat Jul 28 06:45:06 2012] fullrun_mos1_xmm0550671001_pi300-10000_cl_pass1_src35_1.ximg exists
[Sat Jul 28 06:45:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671001_pi300-10000_cl_pass1_src35.csv
[Sat Jul 28 06:45:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550671001_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550671001_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 06:45:08 2012] fullrun_mos1_xmm0550671001_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Sat Jul 28 06:45:08 2012] fullrun_mos1_xmm0550671001_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Sat Jul 28 06:45:08 2012] Fit fullrun_mos1_xmm0550671001_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Sat Jul 28 10:51:09 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 49 at 64.784563 pixels away
[Sat Jul 28 10:51:09 2012] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 49 at 11.233662 pixels away
[Sat Jul 28 10:51:09 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 10:51:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 10:51:09 2012] Assessing source extent using major
[Sat Jul 28 10:51:09 2012] Source does appear to be extended
[Sat Jul 28 10:51:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 10:51:09 2012] Source is confused with source 50
[Sat Jul 28 13:07:39 2012] XMMSAS src. selection expression = ellipse(22152.582840, 20829.366684, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 28 13:07:39 2012] Writing source region out to fullrun_mos1_xmm0550671001_pi300-10000_pass1_cl_src49_src.reg
[Sat Jul 28 13:07:39 2012] Extracting stamp from image fullrun_mos1_xmm0550671001_pi300-10000_cl_sm2.00.img.gz, (218, 202) - (293, 277)
[Sat Jul 28 13:07:39 2012] XMMSAS bgd. selection expression = annulus(22152.582840, 20829.366684, 1087.500000, 2175.000000, X, Y) && !ellipse(25338.008000, 21500.594000, 1344.384039, 1344.384039, 0.000000, X, Y) && !ellipse(22961.438000, 21785.914000, 1417.648041, 1417.648041, 0.000000, X, Y) && !ellipse(23855.227905, 20926.240738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22443.187600, 22905.831840, 737.025621, 737.025621, 0.000000, X, Y) && !ellipse(23143.352000, 21454.874000, 1388.432040, 1388.432040, 0.000000, X, Y) && !ellipse(22704.420000, 21921.596000, 1363.880039, 959.648028, 35.303000, X, Y) && !ellipse(23778.330000, 22955.826000, 1245.880036, 1245.880036, 0.000000, X, Y) && !ellipse(25137.290000, 24185.538000, 2465.072071, 2465.072071, 0.000000, X, Y) && !ellipse(21711.467600, 22980.360000, 1375.224040, 1375.224040, 0.000000, X, Y) && !ellipse(21502.478000, 23076.118000, 924.584027, 924.584027, 0.000000, X, Y) && !ellipse(22747.840000, 23597.984000, 1919.032055, 1919.032055, 0.000000, X, Y) && !ellipse(24170.268372, 23162.469696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20011.484909, 23012.572052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21303.854200, 20816.759000, 1478.376043, 1478.376043, 0.000000, X, Y)
[Sat Jul 28 13:07:39 2012] Writing fullrun_mos1_xmm0550671001_pi300-10000_pass1_cl_src49.gif
[Sat Jul 28 13:32:28 2012] Mean detx,y = (3505.65, 2545.65) 
[Sat Jul 28 13:32:29 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 13:32:38 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 13:32:38 2012] Setting source spectrum file to fullrun_mos1_xmm0550671001_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Sat Jul 28 13:32:38 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550671001_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Sat Jul 28 17:42:11 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 28 17:42:11 2012] rmf not generated due to insufficient counts
[Sun Jul 29 03:34:39 2012] Updating aperture counts using extracted products
[Sun Jul 29 03:34:39 2012] Error reading totcts from fullrun_mos1_xmm0550671001_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Sun Jul 29 03:34:40 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 29 03:34:40 2012] Using photon index=1.80, rate=0.00465, arf fullrun_mos1_xmm0550671001_pi300-10000_pass1_cl_src49.arf
[Sun Jul 29 03:34:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 29 03:34:40 2012] Updating source flux to 5.3e-14
[Sun Jul 29 03:34:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting