[Fri Jul 27 18:17:05 2012] Detection parameters:
  Position = (253.0, 261.6) = 18 52 48.06 0 39 6.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 278.5 +/- 25.9
  Background counts = 95.1
  Rate = 0.01 +/- 0.001

[Fri Jul 27 18:17:05 2012] Off-axis axis estimate = 4.24'
[Fri Jul 27 19:11:21 2012] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 19:11:21 2012] Initial guess for spatial extent in simple fitting = 8.55"
[Fri Jul 27 19:11:21 2012] source mask rpix=2.0, npix_max = 24, mask sum = 16, frac = 0.658
[Fri Jul 27 19:11:21 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 8.55"
[Fri Jul 27 22:26:28 2012] fullrun_mos1_xmm0550671001_pi300-10000_cl_pass0_src15.ximg exists
[Fri Jul 27 22:26:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671001_pi300-10000_cl_pass0_src15.csv
[Fri Jul 27 22:26:28 2012] fullrun_mos1_xmm0550671001_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri Jul 27 22:26:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671001_pi300-10000_cl_pass0_src15.csv
[Fri Jul 27 22:26:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550671001_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550671001_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 22:26:29 2012] fullrun_mos1_xmm0550671001_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri Jul 27 22:26:29 2012] fullrun_mos1_xmm0550671001_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Jul 27 22:26:29 2012] Fit fullrun_mos1_xmm0550671001_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sat Jul 28 02:04:57 2012] Warning, spatial fit 15 centroid is now closest to src. 44
[Sat Jul 28 02:04:57 2012] Spatial fit model total counts = 1827.720000, observed total counts = 1859.000000
[Sat Jul 28 02:04:57 2012] Offset between fit and detection position for source 47 = 4.259111 pixels
[Sat Jul 28 02:04:57 2012] Warning, changing simple spatial fit ID from 15 to 17
[Sat Jul 28 02:04:57 2012] 1861.544000 total counts/ 1100.280000 bgd. counts: snr = 22.950052
Spatial fit parameters:
  Offset between fit and detection position for source 47 = 4.259111 pixels
  Position = (250.1, 264.7) = 18 52 48.89 0 39 21.3
  Extent = 17.2 (17.1-34.4)", rotation angle = 0
  Source counts = 761.3 +/- 43.1
  Background counts = 1100.3
  Rate = 0.03 +/- 0.002
[Sat Jul 28 02:04:57 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 02:04:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 02:04:57 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 02:04:57 2012] Source does appear to be extended
[Sat Jul 28 02:04:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 02:04:57 2012] Source is confused with source 3
[Sat Jul 28 03:01:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 28 03:01:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 28 03:01:39 2012] Initial guess for spatial extent in simple fitting = 17.19"
[Sat Jul 28 03:01:39 2012] source mask rpix=4.0, npix_max = 79, mask sum = 72, frac = 0.908
[Sat Jul 28 03:01:39 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 17.19"
[Sat Jul 28 06:45:06 2012] fullrun_mos1_xmm0550671001_pi300-10000_cl_pass1_src15.ximg exists
[Sat Jul 28 06:45:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671001_pi300-10000_cl_pass1_src15.csv
[Sat Jul 28 06:45:06 2012] fullrun_mos1_xmm0550671001_pi300-10000_cl_pass1_src15_1.ximg exists
[Sat Jul 28 06:45:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671001_pi300-10000_cl_pass1_src15.csv
[Sat Jul 28 06:45:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550671001_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550671001_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 06:45:07 2012] fullrun_mos1_xmm0550671001_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sat Jul 28 06:45:07 2012] fullrun_mos1_xmm0550671001_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sat Jul 28 06:45:07 2012] Fit fullrun_mos1_xmm0550671001_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sat Jul 28 10:51:09 2012] Warning, spatial fit 15 centroid is now closest to src. 36
[Sat Jul 28 10:51:09 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 10:51:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 10:51:09 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 10:51:09 2012] Source does appear to be extended
[Sat Jul 28 10:51:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 13:07:38 2012] XMMSAS src. selection expression = ellipse(21711.467600, 22980.360000, 1031.418030, 1031.418030, 0.000000, X, Y)
[Sat Jul 28 13:07:38 2012] Writing source region out to fullrun_mos1_xmm0550671001_pi300-10000_pass1_cl_src47_src.reg
[Sat Jul 28 13:07:38 2012] Extracting stamp from image fullrun_mos1_xmm0550671001_pi300-10000_cl_sm2.00.img.gz, (191, 205) - (309, 324)
[Sat Jul 28 13:07:38 2012] XMMSAS bgd. selection expression = annulus(21711.467600, 22980.360000, 1719.030049, 3438.060099, X, Y) && !ellipse(24825.327080, 24170.375600, 304.967209, 304.967209, 0.000000, X, Y) && !ellipse(25338.008000, 21500.594000, 1344.384039, 1344.384039, 0.000000, X, Y) && !ellipse(22961.438000, 21785.914000, 1417.648041, 1417.648041, 0.000000, X, Y) && !ellipse(26326.447600, 22390.230000, 1232.536035, 369.239211, 0.568000, X, Y) && !ellipse(23855.227905, 20926.240738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22443.187600, 22905.831840, 737.025621, 737.025621, 0.000000, X, Y) && !ellipse(26110.075181, 23567.070272, 1172.952034, 657.077660, 0.000000, X, Y) && !ellipse(23143.352000, 21454.874000, 1388.432040, 1388.432040, 0.000000, X, Y) && !ellipse(22704.420000, 21921.596000, 1363.880039, 959.648028, 35.303000, X, Y) && !ellipse(23778.330000, 22955.826000, 1245.880036, 1245.880036, 0.000000, X, Y) && !ellipse(25137.290000, 24185.538000, 2465.072071, 2465.072071, 0.000000, X, Y) && !ellipse(24997.245400, 26730.523840, 1116.288032, 1116.288032, 0.000000, X, Y) && !ellipse(21502.478000, 23076.118000, 924.584027, 924.584027, 0.000000, X, Y) && !ellipse(26193.062200, 24633.482000, 1109.208032, 1109.208032, 0.000000, X, Y) && !ellipse(21828.175200, 24801.168800, 838.040024, 838.040024, 0.000000, X, Y) && !ellipse(22747.840000, 23597.984000, 1919.032055, 1919.032055, 0.000000, X, Y) && !ellipse(24170.268372, 23162.469696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21686.902000, 26420.414800, 1151.496033, 742.862421, 102.448000, X, Y) && !ellipse(25386.274445, 24809.384369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20011.484909, 23012.572052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19490.912200, 25157.357200, 674.832819, 674.832819, 0.000000, X, Y) && !ellipse(22152.582840, 20829.366684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19641.656000, 24541.717800, 1438.632041, 1438.632041, 0.000000, X, Y) && !ellipse(21420.554000, 26130.852000, 1304.568038, 1304.568038, 0.000000, X, Y) && !ellipse(21303.854200, 20816.759000, 1478.376043, 1478.376043, 0.000000, X, Y)
[Sat Jul 28 13:07:38 2012] Writing fullrun_mos1_xmm0550671001_pi300-10000_pass1_cl_src47.gif
[Sat Jul 28 13:26:34 2012] Mean detx,y = (1414.09, 2727.91) 
[Sat Jul 28 13:26:35 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 13:26:46 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 13:26:46 2012] Setting source spectrum file to fullrun_mos1_xmm0550671001_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Sat Jul 28 13:26:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550671001_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Sun Jul 29 03:34:39 2012] Updating aperture counts using extracted products
[Sun Jul 29 03:34:39 2012] Error reading totcts from fullrun_mos1_xmm0550671001_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Sun Jul 29 03:34:40 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 29 03:34:40 2012] Using photon index=1.80, rate=0.0278, arf fullrun_mos1_xmm0550671001_pi300-10000_pass1_cl_src47.arf
[Sun Jul 29 03:34:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 29 03:34:40 2012] Updating source flux to 2.7e-13
[Sun Jul 29 03:34:43 2012] Flag c found in src. 47 procflags, skipping spectral fitting