[Fri Jul 27 18:17:05 2012] Detection parameters:
  Position = (260.1, 273.8) = 18 52 45.99 0 40 1.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 206.5 +/- 25.1
  Background counts = 139.9
  Rate = 0.008 +/- 0.001

[Fri Jul 27 18:17:05 2012] Off-axis axis estimate = 3.30'
[Fri Jul 27 19:11:21 2012] Using EEF radius (= 8.08 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 19:11:21 2012] Initial guess for spatial extent in simple fitting = 8.08"
[Fri Jul 27 19:11:21 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.900
[Fri Jul 27 19:11:21 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 8.08"
[Fri Jul 27 22:26:28 2012] fullrun_mos1_xmm0550671001_pi300-10000_cl_pass0_src25.ximg exists
[Fri Jul 27 22:26:28 2012] fullrun_mos1_xmm0550671001_pi300-10000_cl_pass0_src25_1.ximg exists
[Fri Jul 27 22:26:28 2012] Fit fullrun_mos1_xmm0550671001_pi300-10000_cl_pass0_src25 appears to have run properly
[Fri Jul 27 22:26:29 2012] fullrun_mos1_xmm0550671001_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Fri Jul 27 22:26:29 2012] fullrun_mos1_xmm0550671001_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Fri Jul 27 22:26:29 2012] Fit fullrun_mos1_xmm0550671001_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Sat Jul 28 02:04:57 2012] Spatial fit model total counts = 2316.740000, observed total counts = 2305.000000
[Sat Jul 28 02:04:57 2012] Offset between fit and detection position for source 36 = 4.079170 pixels
[Sat Jul 28 02:04:57 2012] 2153.770000 total counts/ 1988.370000 bgd. counts: snr = 3.709257
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 4.079170 pixels
  Position = (259.7, 277.9) = 18 52 46.12 0 40 18.7
  Extent = 15.4" x 8.6", rotation angle = 83
  Source counts = 165.4 +/- 46.4
  Background counts = 1988.4
  Rate = 0.006 +/- 0.002
[Sat Jul 28 02:04:57 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 02:04:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 02:04:57 2012] Assessing source extent using major
[Sat Jul 28 02:04:57 2012] Source does appear to be extended
[Sat Jul 28 02:04:57 2012] Computing asymmetry using major and minor axis, asym = 1.78
[Sat Jul 28 02:04:57 2012] Source is asymmetric
[Sat Jul 28 03:01:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 28 03:01:39 2012] Initial guess for spatial extent in simple fitting = 11.99"
[Sat Jul 28 03:01:39 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.990
[Sat Jul 28 03:01:39 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 11.99"
[Sat Jul 28 06:45:06 2012] fullrun_mos1_xmm0550671001_pi300-10000_cl_pass1_src25.ximg exists
[Sat Jul 28 06:45:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671001_pi300-10000_cl_pass1_src25.csv
[Sat Jul 28 06:45:06 2012] fullrun_mos1_xmm0550671001_pi300-10000_cl_pass1_src25_1.ximg exists
[Sat Jul 28 06:45:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550671001_pi300-10000_cl_pass1_src25.csv
[Sat Jul 28 06:45:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550671001_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550671001_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 06:45:07 2012] fullrun_mos1_xmm0550671001_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sat Jul 28 06:45:07 2012] fullrun_mos1_xmm0550671001_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sat Jul 28 06:45:07 2012] Fit fullrun_mos1_xmm0550671001_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Sat Jul 28 10:51:09 2012] Source 36 is offset by -6.126202 and -2.927442 pixels which is larger than
2 X fitted extent = 1.975899 x 1.975899, not incorporating fit results
[Sat Jul 28 10:51:09 2012] Spatial fit model total counts = 2286.450000, observed total counts = 2281.000000
[Sat Jul 28 10:51:09 2012] Offset between fit and detection position for source 36 = 6.517876 pixels
[Sat Jul 28 10:51:09 2012] 2179.553000 total counts/ 1271.950000 bgd. counts: snr = 25.448425
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 6.517876 pixels
  Position = (262.0, 271.8) = 18 52 45.44 0 39 52.2
  Extent = 24.0 (23.5-48.0)", rotation angle = 0
  Source counts = 907.6 +/- 46.7
  Background counts = 1272.0
  Rate = 0.03 +/- 0.002
[Sat Jul 28 10:51:09 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 10:51:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 10:51:09 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 10:51:09 2012] Source does appear to be extended
[Sat Jul 28 10:51:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 10:51:09 2012] Source is confused with source 3
[Sat Jul 28 10:51:09 2012] Source is confused with source 46
[Sat Jul 28 10:51:09 2012] Source is confused with source 47
[Sat Jul 28 10:51:09 2012] Source is confused with source 44
[Sat Jul 28 13:07:38 2012] XMMSAS src. selection expression = ellipse(22747.840000, 23597.984000, 1439.274041, 1439.274041, 0.000000, X, Y)
[Sat Jul 28 13:07:38 2012] Writing source region out to fullrun_mos1_xmm0550671001_pi300-10000_pass1_cl_src36_src.reg
[Sat Jul 28 13:07:38 2012] Extracting stamp from image fullrun_mos1_xmm0550671001_pi300-10000_cl_sm2.00.img.gz, (179, 189) - (345, 355)
[Sat Jul 28 13:07:39 2012] XMMSAS bgd. selection expression = annulus(22747.840000, 23597.984000, 2398.790069, 4797.580138, X, Y) && !ellipse(24825.327080, 24170.375600, 304.967209, 304.967209, 0.000000, X, Y) && !ellipse(25338.008000, 21500.594000, 1344.384039, 1344.384039, 0.000000, X, Y) && !ellipse(22961.438000, 21785.914000, 1417.648041, 1417.648041, 0.000000, X, Y) && !ellipse(26326.447600, 22390.230000, 1232.536035, 369.239211, 0.568000, X, Y) && !ellipse(23855.227905, 20926.240738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22443.187600, 22905.831840, 737.025621, 737.025621, 0.000000, X, Y) && !ellipse(26110.075181, 23567.070272, 1172.952034, 657.077660, 0.000000, X, Y) && !ellipse(23143.352000, 21454.874000, 1388.432040, 1388.432040, 0.000000, X, Y) && !ellipse(22704.420000, 21921.596000, 1363.880039, 959.648028, 35.303000, X, Y) && !ellipse(26548.786000, 23428.998000, 346.050410, 346.050410, 0.000000, X, Y) && !ellipse(23778.330000, 22955.826000, 1245.880036, 1245.880036, 0.000000, X, Y) && !ellipse(25137.290000, 24185.538000, 2465.072071, 2465.072071, 0.000000, X, Y) && !ellipse(24997.245400, 26730.523840, 1116.288032, 1116.288032, 0.000000, X, Y) && !ellipse(21711.467600, 22980.360000, 1375.224040, 1375.224040, 0.000000, X, Y) && !ellipse(27458.364800, 26504.389000, 2304.176066, 1045.912030, 76.658000, X, Y) && !ellipse(21502.478000, 23076.118000, 924.584027, 924.584027, 0.000000, X, Y) && !ellipse(27080.930600, 22931.858000, 850.000024, 850.000024, 0.000000, X, Y) && !ellipse(26515.758423, 22915.459045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26193.062200, 24633.482000, 1109.208032, 1109.208032, 0.000000, X, Y) && !ellipse(27954.640000, 25517.458000, 1151.496033, 1151.496033, 0.000000, X, Y) && !ellipse(21828.175200, 24801.168800, 838.040024, 838.040024, 0.000000, X, Y) && !ellipse(26935.157471, 23780.725128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26093.507874, 22917.829987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24170.268372, 23162.469696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21686.902000, 26420.414800, 1151.496033, 742.862421, 102.448000, X, Y) && !ellipse(27453.374000, 26680.806000, 1151.592033, 1151.592033, 0.000000, X, Y) && !ellipse(27044.178284, 23358.001984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25386.274445, 24809.384369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20011.484909, 23012.572052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19490.912200, 25157.357200, 674.832819, 674.832819, 0.000000, X, Y) && !ellipse(22152.582840, 20829.366684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27529.897308, 25024.765656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19641.656000, 24541.717800, 1438.632041, 1438.632041, 0.000000, X, Y) && !ellipse(21420.554000, 26130.852000, 1304.568038, 1304.568038, 0.000000, X, Y) && !ellipse(28399.541534, 26468.671478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21303.854200, 20816.759000, 1478.376043, 1478.376043, 0.000000, X, Y) && !ellipse(26436.128784, 26209.591064, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 28 13:07:39 2012] Writing fullrun_mos1_xmm0550671001_pi300-10000_pass1_cl_src36.gif
[Sat Jul 28 13:29:39 2012] Mean detx,y = (1012.17, 1923.97) 
[Sat Jul 28 13:29:41 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 13:30:08 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 13:30:09 2012] Setting source spectrum file to fullrun_mos1_xmm0550671001_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Sat Jul 28 13:30:09 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550671001_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Sun Jul 29 03:34:39 2012] Updating aperture counts using extracted products
[Sun Jul 29 03:34:39 2012] Error reading totcts from fullrun_mos1_xmm0550671001_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Sun Jul 29 03:34:40 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 29 03:34:40 2012] Using photon index=1.80, rate=0.0331, arf fullrun_mos1_xmm0550671001_pi300-10000_pass1_cl_src36.arf
[Sun Jul 29 03:34:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 29 03:34:40 2012] Updating source flux to 3e-13
[Sun Jul 29 03:34:43 2012] Flag b found in src. 36 procflags, skipping spectral fitting
[Sun Jul 29 03:34:43 2012] Flag c found in src. 36 procflags, skipping spectral fitting