[Sun Apr 29 10:13:21 2012] Detection parameters:
  Position = (264.3, 257.9) = 18 52 44.84 0 38 50.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 397.9 +/- 30.8
  Background counts = 106.3
  Rate = 0.02 +/- 0.001

[Sun Apr 29 10:13:26 2012] Off-axis axis estimate = 3.84'
[Sun Apr 29 14:39:31 2012] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 14:39:31 2012] Initial guess for spatial extent in simple fitting = 8.35"
[Sun Apr 29 14:39:31 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.854
[Sun Apr 29 14:39:31 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 8.35"
[Sun Apr 29 17:38:39 2012] fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_src9.ximg exists
[Sun Apr 29 17:38:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_src9.csv
[Sun Apr 29 17:38:39 2012] fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Apr 29 17:38:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_src9.csv
[Sun Apr 29 17:38:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 17:38:40 2012] fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Apr 29 17:38:40 2012] fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Apr 29 17:38:40 2012] Fit fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sun Apr 29 17:39:06 2012] Spatial fit model total counts = 3481.240000, observed total counts = 3481.000000
[Sun Apr 29 17:39:06 2012] Offset between fit and detection position for source 5 = 4.551015 pixels
[Sun Apr 29 17:39:06 2012] 3395.111000 total counts/ 2708.360000 bgd. counts: snr = 13.196115
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 4.551015 pixels
  Position = (264.3, 253.4) = 18 52 44.83 0 38 29.8
  Extent = 16.7 (16.7-33.4)", rotation angle = 0
  Source counts = 686.8 +/- 58.3
  Background counts = 2708.4
  Rate = 0.03 +/- 0.002
[Sun Apr 29 17:39:06 2012] Spatial fit model total counts = 2583.170000, observed total counts = 2360.000000
[Sun Apr 29 17:39:06 2012] Offset between fit and detection position for source 5 = 3.271436 pixels
[Sun Apr 29 17:39:06 2012] Warning, changing simple spatial fit ID from 9 to 32
[Sun Apr 29 17:39:06 2012] 2400.741000 total counts/ 2025.130000 bgd. counts: snr = 8.346643
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 3.271436 pixels
  Position = (266.6, 255.8) = 18 52 44.19 0 38 40.2
  Extent = 16.6 (16.3-16.8)", rotation angle = 0
  Source counts = 375.6 +/- 49.0
  Background counts = 2025.1
  Rate = 0.01 +/- 0.002
[Sun Apr 29 17:39:06 2012] Vigneting correction estimate = 1.000000
[Sun Apr 29 17:39:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr 29 17:39:06 2012] Assessing source extent using major axis lower bound
[Sun Apr 29 17:39:06 2012] Source does appear to be extended
[Sun Apr 29 17:39:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr 29 17:39:06 2012] Source is confused with source 10
[Sun Apr 29 22:33:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Apr 29 22:33:29 2012] Initial guess for spatial extent in simple fitting = 16.61"
[Sun Apr 29 22:33:29 2012] source mask rpix=3.8, npix_max = 74, mask sum = 81, frac = 1.086
[Sun Apr 29 22:33:29 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 16.61"
[Mon Apr 30 02:42:11 2012] fullrun_mos2_xmm0550670901_pi300-10000_cl_pass1_src9.ximg exists
[Mon Apr 30 02:42:11 2012] fullrun_mos2_xmm0550670901_pi300-10000_cl_pass1_src9_1.ximg exists
[Mon Apr 30 02:42:11 2012] Fit fullrun_mos2_xmm0550670901_pi300-10000_cl_pass1_src9 appears to have run properly
[Mon Apr 30 02:42:12 2012] fullrun_mos2_xmm0550670901_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Mon Apr 30 02:42:12 2012] fullrun_mos2_xmm0550670901_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Mon Apr 30 02:42:12 2012] Fit fullrun_mos2_xmm0550670901_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Mon Apr 30 02:42:38 2012] Warning, spatial fit 9 centroid is now closest to src. 45
[Mon Apr 30 02:42:38 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 02:42:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 02:42:38 2012] Assessing source extent using major axis lower bound
[Mon Apr 30 02:42:38 2012] Source does appear to be extended
[Mon Apr 30 02:42:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 09:15:56 2012] XMMSAS src. selection expression = ellipse(23141.676000, 22203.792000, 996.348029, 996.348029, 0.000000, X, Y)
[Mon Apr 30 09:15:56 2012] Writing source region out to fullrun_mos2_xmm0550670901_pi300-10000_pass1_cl_src5_src.reg
[Mon Apr 30 09:15:56 2012] Extracting stamp from image fullrun_mos2_xmm0550670901_pi300-10000_cl_sm2.00.img.gz, (209, 199) - (324, 313)
[Mon Apr 30 09:15:56 2012] XMMSAS bgd. selection expression = annulus(23141.676000, 22203.792000, 1660.580048, 3321.160096, X, Y) && !ellipse(24851.097140, 24200.101800, 345.335210, 345.335210, 0.000000, X, Y) && !ellipse(24666.184000, 21046.014000, 2389.608069, 2389.608069, 0.000000, X, Y) && !ellipse(26138.441000, 22226.420200, 967.640028, 967.640028, 0.000000, X, Y) && !ellipse(22662.691360, 21906.437800, 742.798421, 742.798421, 0.000000, X, Y) && !ellipse(25469.820000, 21547.272000, 1935.280056, 1935.280056, 0.000000, X, Y) && !ellipse(22095.748000, 22611.530800, 1360.648039, 1360.648039, 0.000000, X, Y) && !ellipse(23732.450400, 20831.300200, 1183.728034, 1183.728034, 0.000000, X, Y) && !ellipse(25950.080000, 22035.000000, 1316.680038, 1316.680038, 0.000000, X, Y) && !ellipse(26080.946400, 23618.033200, 1081.384031, 1081.384031, 0.000000, X, Y) && !ellipse(25300.546000, 24266.480000, 594.254417, 594.254417, 0.000000, X, Y) && !ellipse(22564.299600, 23593.548000, 1292.840037, 1292.840037, 0.000000, X, Y) && !ellipse(27107.462200, 23541.554000, 1491.000043, 1491.000043, 0.000000, X, Y) && !ellipse(23807.063019, 22828.780304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20069.701000, 23584.460000, 439.373613, 439.373613, 0.000000, X, Y) && !ellipse(26526.491400, 24782.264000, 1167.384034, 1167.384034, 350.814000, X, Y) && !ellipse(21926.057000, 22999.972000, 2501.880072, 2501.880072, 0.000000, X, Y) && !ellipse(21822.152400, 24729.121600, 927.656027, 927.656027, 0.000000, X, Y) && !ellipse(22471.426636, 23952.853333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26568.314000, 24981.053000, 1105.496032, 1105.496032, 0.000000, X, Y) && !ellipse(24355.000000, 22870.055389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21814.103200, 26415.747400, 2102.112060, 829.632024, 97.266880, X, Y) && !ellipse(21564.629257, 22249.479462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25073.735016, 24734.557678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19542.591140, 25330.593400, 762.628022, 762.628022, 0.000000, X, Y) && !ellipse(23833.010620, 21694.984558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25429.851440, 22629.281403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25857.406738, 25873.862610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20015.655960, 24038.002777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19403.310400, 24348.546000, 640.772018, 640.772018, 0.000000, X, Y) && !ellipse(21734.561752, 25878.591217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21784.738000, 26336.146000, 978.344028, 978.344028, 0.000000, X, Y) && !ellipse(24889.756000, 23233.172000, 1250.032036, 1250.032036, 0.000000, X, Y) && !ellipse(21642.382000, 20603.062400, 1456.744042, 1456.744042, 0.000000, X, Y) && !ellipse(26440.360901, 26226.131897, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Apr 30 09:15:56 2012] Writing fullrun_mos2_xmm0550670901_pi300-10000_pass1_cl_src5.gif
[Mon Apr 30 09:38:28 2012] Mean detx,y = (-1694.01, 2023.88) 
[Mon Apr 30 09:38:29 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Apr 30 09:38:41 2012] Binned source spectrum to 10 counts/bin
[Mon Apr 30 09:38:41 2012] Setting source spectrum file to fullrun_mos2_xmm0550670901_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Apr 30 09:38:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550670901_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon Apr 30 14:17:26 2012] Updating aperture counts using extracted products
[Mon Apr 30 14:17:26 2012] Error reading totcts from fullrun_mos2_xmm0550670901_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Apr 30 14:17:29 2012] Calculating source flux in energy range 0.30-8.00
[Mon Apr 30 14:17:29 2012] Using photon index=1.80, rate=0.0144, arf fullrun_mos2_xmm0550670901_pi300-10000_pass1_cl_src5.arf
[Mon Apr 30 14:17:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Apr 30 14:17:29 2012] Updating source flux to 1.4e-13
[Mon Apr 30 14:27:43 2012] Flag c found in src. 5 procflags, skipping spectral fitting