[Sun Apr 29 10:13:24 2012] Detection parameters:
  Position = (302.7, 285.9) = 18 52 33.71 0 40 51.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 253.3 +/- 25.8
  Background counts = 93.9
  Rate = 0.01 +/- 0.001

[Sun Apr 29 10:13:26 2012] Off-axis axis estimate = 0.96'
[Sun Apr 29 14:39:31 2012] Using EEF radius (= 6.91 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 14:39:31 2012] Initial guess for spatial extent in simple fitting = 6.91"
[Sun Apr 29 14:39:31 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.917
[Sun Apr 29 14:39:31 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 6.91"
[Sun Apr 29 17:38:40 2012] fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_src20.ximg exists
[Sun Apr 29 17:38:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_src20.csv
[Sun Apr 29 17:38:40 2012] fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_src20_1.ximg exists
[Sun Apr 29 17:38:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_src20.csv
[Sun Apr 29 17:38:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 17:38:41 2012] fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sun Apr 29 17:38:41 2012] fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sun Apr 29 17:38:41 2012] Fit fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Sun Apr 29 17:39:06 2012] Warning, spatial fit 20 centroid is now closest to src. 33
[Sun Apr 29 17:39:06 2012] Vigneting correction estimate = 1.000000
[Sun Apr 29 17:39:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr 29 17:39:06 2012] Assessing source extent using major
[Sun Apr 29 17:39:06 2012] Source does appear to be extended
[Sun Apr 29 17:39:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr 29 17:39:06 2012] Source is confused with source 33
[Sun Apr 29 22:33:29 2012] Using EEF radius (= 6.91 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 22:33:29 2012] Initial guess for spatial extent in simple fitting = 6.91"
[Sun Apr 29 22:33:29 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.917
[Sun Apr 29 22:33:29 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 6.91"
[Mon Apr 30 02:42:11 2012] fullrun_mos2_xmm0550670901_pi300-10000_cl_pass1_src20.ximg exists
[Mon Apr 30 02:42:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670901_pi300-10000_cl_pass1_src20.csv
[Mon Apr 30 02:42:11 2012] fullrun_mos2_xmm0550670901_pi300-10000_cl_pass1_src20_1.ximg exists
[Mon Apr 30 02:42:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670901_pi300-10000_cl_pass1_src20.csv
[Mon Apr 30 02:42:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670901_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670901_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 02:42:12 2012] fullrun_mos2_xmm0550670901_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Mon Apr 30 02:42:12 2012] fullrun_mos2_xmm0550670901_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Mon Apr 30 02:42:12 2012] Fit fullrun_mos2_xmm0550670901_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Mon Apr 30 02:42:38 2012] Source 40 is offset by -3.331415 and 1.712391 pixels which is larger than
2 X fitted extent = 1.920304 x 1.920304, not incorporating fit results
[Mon Apr 30 02:42:38 2012] Warning, spatial fit 20 centroid is now closest to src. 33
[Mon Apr 30 02:42:38 2012] Spatial fit model total counts = 2638.080000, observed total counts = 2482.000000
[Mon Apr 30 02:42:38 2012] Offset between fit and detection position for source 40 = 2.826056 pixels
[Mon Apr 30 02:42:38 2012] Warning, changing simple spatial fit ID from 20 to 25
[Mon Apr 30 02:42:38 2012] 2506.331000 total counts/ 2351.440000 bgd. counts: snr = 3.194179
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 2.826056 pixels
  Position = (305.5, 285.4) = 18 52 32.90 0 40 49.1
  Extent = 14.6" x 14.6", rotation angle = 351
  Source counts = 154.9 +/- 50.1
  Background counts = 2351.4
  Rate = 0.006 +/- 0.002
[Mon Apr 30 02:42:38 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 02:42:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 02:42:38 2012] Assessing source extent using major
[Mon Apr 30 02:42:38 2012] Source does appear to be extended
[Mon Apr 30 02:42:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 09:15:57 2012] XMMSAS src. selection expression = ellipse(26526.491400, 24782.264000, 875.538025, 875.538025, 350.814000, X, Y)
[Mon Apr 30 09:15:57 2012] Writing source region out to fullrun_mos2_xmm0550670901_pi300-10000_pass1_cl_src40_src.reg
[Mon Apr 30 09:15:57 2012] Extracting stamp from image fullrun_mos2_xmm0550670901_pi300-10000_cl_sm2.00.img.gz, (255, 235) - (356, 336)
[Mon Apr 30 09:15:57 2012] XMMSAS bgd. selection expression = annulus(26526.491400, 24782.264000, 1459.230042, 2918.460084, X, Y) && !ellipse(24851.097140, 24200.101800, 345.335210, 345.335210, 0.000000, X, Y) && !ellipse(24666.184000, 21046.014000, 2389.608069, 2389.608069, 0.000000, X, Y) && !ellipse(26138.441000, 22226.420200, 967.640028, 967.640028, 0.000000, X, Y) && !ellipse(25469.820000, 21547.272000, 1935.280056, 1935.280056, 0.000000, X, Y) && !ellipse(23732.450400, 20831.300200, 1183.728034, 1183.728034, 0.000000, X, Y) && !ellipse(23141.676000, 22203.792000, 1328.464038, 1328.464038, 0.000000, X, Y) && !ellipse(25950.080000, 22035.000000, 1316.680038, 1316.680038, 0.000000, X, Y) && !ellipse(26080.946400, 23618.033200, 1081.384031, 1081.384031, 0.000000, X, Y) && !ellipse(25300.546000, 24266.480000, 594.254417, 594.254417, 0.000000, X, Y) && !ellipse(22564.299600, 23593.548000, 1292.840037, 1292.840037, 0.000000, X, Y) && !ellipse(24883.076600, 26717.095800, 1113.800032, 706.264820, -0.000000, X, Y) && !ellipse(27625.872740, 26446.876800, 1147.584033, 1147.584033, 0.000000, X, Y) && !ellipse(27107.462200, 23541.554000, 1491.000043, 1491.000043, 0.000000, X, Y) && !ellipse(23807.063019, 22828.780304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27748.711200, 25479.309800, 1151.624033, 1151.624033, 0.000000, X, Y) && !ellipse(21926.057000, 22999.972000, 2501.880072, 2501.880072, 0.000000, X, Y) && !ellipse(27486.571364, 27064.367291, 965.549091, 782.628882, 77.405471, X, Y) && !ellipse(26568.314000, 24981.053000, 1105.496032, 1105.496032, 0.000000, X, Y) && !ellipse(27414.982330, 24470.780518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24355.000000, 22870.055389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21814.103200, 26415.747400, 2102.112060, 829.632024, 97.266880, X, Y) && !ellipse(25073.735016, 24734.557678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23833.010620, 21694.984558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25429.851440, 22629.281403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28713.980000, 25013.782000, 1011.992029, 1011.992029, 0.000000, X, Y) && !ellipse(25857.406738, 25873.862610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28772.315613, 25779.932983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29059.574000, 26827.862000, 1213.584035, 1213.584035, 0.000000, X, Y) && !ellipse(24889.756000, 23233.172000, 1250.032036, 1250.032036, 0.000000, X, Y) && !ellipse(26440.360901, 26226.131897, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Apr 30 09:15:57 2012] Writing fullrun_mos2_xmm0550670901_pi300-10000_pass1_cl_src40.gif
[Mon Apr 30 09:41:05 2012] Mean detx,y = (1752.88, -441.69) 
[Mon Apr 30 09:41:06 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Apr 30 09:41:15 2012] Binned source spectrum to 10 counts/bin
[Mon Apr 30 09:41:16 2012] Setting source spectrum file to fullrun_mos2_xmm0550670901_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Mon Apr 30 09:41:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550670901_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Mon Apr 30 14:17:27 2012] Updating aperture counts using extracted products
[Mon Apr 30 14:17:27 2012] Error reading totcts from fullrun_mos2_xmm0550670901_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Mon Apr 30 14:17:30 2012] Calculating source flux in energy range 0.30-8.00
[Mon Apr 30 14:17:30 2012] Using photon index=1.80, rate=0.00595, arf fullrun_mos2_xmm0550670901_pi300-10000_pass1_cl_src40.arf
[Mon Apr 30 14:17:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Apr 30 14:17:30 2012] Updating source flux to 6.3e-14
[Mon Apr 30 14:27:43 2012] Flag b found in src. 40 procflags, skipping spectral fitting
[Mon Apr 30 14:27:43 2012] Flag c found in src. 40 procflags, skipping spectral fitting