[Sun Apr 29 10:13:21 2012] Detection parameters:
  Position = (274.4, 241.1) = 18 52 41.91 0 37 36.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 376.1 +/- 27.2
  Background counts = 70.5
  Rate = 0.02 +/- 0.001

[Sun Apr 29 10:13:26 2012] Off-axis axis estimate = 4.51'
[Sun Apr 29 14:39:31 2012] Using EEF radius (= 8.68 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 14:39:31 2012] Initial guess for spatial extent in simple fitting = 8.68"
[Sun Apr 29 14:39:31 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.003
[Sun Apr 29 14:39:31 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 8.68"
[Sun Apr 29 17:38:39 2012] fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_src8.ximg exists
[Sun Apr 29 17:38:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_src8.csv
[Sun Apr 29 17:38:39 2012] fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun Apr 29 17:38:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_src8.csv
[Sun Apr 29 17:38:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 17:38:40 2012] fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun Apr 29 17:38:40 2012] fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun Apr 29 17:38:40 2012] Fit fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Sun Apr 29 17:39:06 2012] Source 12 is offset by -5.601096 and 3.049753 pixels which is larger than
2 X fitted extent = 0.998074 x 0.998074, not incorporating fit results
[Sun Apr 29 17:39:06 2012] Spatial fit model total counts = 2072.320000, observed total counts = 2098.000000
[Sun Apr 29 17:39:06 2012] Offset between fit and detection position for source 12 = 1.172330 pixels
[Sun Apr 29 17:39:06 2012] 2025.909000 total counts/ 946.609000 bgd. counts: snr = 35.079780
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 1.172330 pixels
  Position = (275.1, 240.1) = 18 52 41.70 0 37 32.2
  Extent = 17.4 (14.4-34.7)", rotation angle = 0
  Source counts = 1079.3 +/- 45.0
  Background counts = 946.6
  Rate = 0.04 +/- 0.002
[Sun Apr 29 17:39:06 2012] Vigneting correction estimate = 1.000000
[Sun Apr 29 17:39:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr 29 17:39:06 2012] Assessing source extent using major axis lower bound
[Sun Apr 29 17:39:06 2012] Source does appear to be extended
[Sun Apr 29 17:39:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr 29 17:39:06 2012] Source is confused with source 50
[Sun Apr 29 22:33:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Apr 29 22:33:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Apr 29 22:33:29 2012] Initial guess for spatial extent in simple fitting = 17.37"
[Sun Apr 29 22:33:29 2012] source mask rpix=4.0, npix_max = 80, mask sum = 63, frac = 0.780
[Sun Apr 29 22:33:29 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 17.37"
[Mon Apr 30 02:42:11 2012] fullrun_mos2_xmm0550670901_pi300-10000_cl_pass1_src8.ximg exists
[Mon Apr 30 02:42:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670901_pi300-10000_cl_pass1_src8.csv
[Mon Apr 30 02:42:11 2012] fullrun_mos2_xmm0550670901_pi300-10000_cl_pass1_src8_1.ximg exists
[Mon Apr 30 02:42:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670901_pi300-10000_cl_pass1_src8.csv
[Mon Apr 30 02:42:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670901_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670901_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 02:42:12 2012] fullrun_mos2_xmm0550670901_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Mon Apr 30 02:42:12 2012] fullrun_mos2_xmm0550670901_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Mon Apr 30 02:42:12 2012] Fit fullrun_mos2_xmm0550670901_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Mon Apr 30 02:42:38 2012] Spatial fit model total counts = 4476.450000, observed total counts = 4078.000000
[Mon Apr 30 02:42:38 2012] Offset between fit and detection position for source 12 = 1.790053 pixels
[Mon Apr 30 02:42:38 2012] 4593.667000 total counts/ 4071.510000 bgd. counts: snr = 8.183204
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 1.790053 pixels
  Position = (273.3, 240.0) = 18 52 42.22 0 37 31.6
  Extent = 14.8 (12.2-17.3)", rotation angle = 0
  Source counts = 522.2 +/- 67.8
  Background counts = 4071.5
  Rate = 0.02 +/- 0.003
[Mon Apr 30 02:42:38 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 02:42:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 02:42:38 2012] Assessing source extent using major axis lower bound
[Mon Apr 30 02:42:38 2012] Source does appear to be extended
[Mon Apr 30 02:42:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 09:15:56 2012] XMMSAS src. selection expression = ellipse(23732.450400, 20831.300200, 887.796026, 887.796026, 0.000000, X, Y)
[Mon Apr 30 09:15:56 2012] Writing source region out to fullrun_mos2_xmm0550670901_pi300-10000_pass1_cl_src12_src.reg
[Mon Apr 30 09:15:56 2012] Extracting stamp from image fullrun_mos2_xmm0550670901_pi300-10000_cl_sm2.00.img.gz, (222, 189) - (324, 291)
[Mon Apr 30 09:15:56 2012] XMMSAS bgd. selection expression = annulus(23732.450400, 20831.300200, 1479.660043, 2959.320085, X, Y) && !ellipse(24666.184000, 21046.014000, 2389.608069, 2389.608069, 0.000000, X, Y) && !ellipse(26138.441000, 22226.420200, 967.640028, 967.640028, 0.000000, X, Y) && !ellipse(22662.691360, 21906.437800, 742.798421, 742.798421, 0.000000, X, Y) && !ellipse(25469.820000, 21547.272000, 1935.280056, 1935.280056, 0.000000, X, Y) && !ellipse(22095.748000, 22611.530800, 1360.648039, 1360.648039, 0.000000, X, Y) && !ellipse(23141.676000, 22203.792000, 1328.464038, 1328.464038, 0.000000, X, Y) && !ellipse(25950.080000, 22035.000000, 1316.680038, 1316.680038, 0.000000, X, Y) && !ellipse(26080.946400, 23618.033200, 1081.384031, 1081.384031, 0.000000, X, Y) && !ellipse(25300.546000, 24266.480000, 594.254417, 594.254417, 0.000000, X, Y) && !ellipse(22564.299600, 23593.548000, 1292.840037, 1292.840037, 0.000000, X, Y) && !ellipse(27107.462200, 23541.554000, 1491.000043, 1491.000043, 0.000000, X, Y) && !ellipse(23807.063019, 22828.780304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26526.491400, 24782.264000, 1167.384034, 1167.384034, 350.814000, X, Y) && !ellipse(21926.057000, 22999.972000, 2501.880072, 2501.880072, 0.000000, X, Y) && !ellipse(22471.426636, 23952.853333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27414.982330, 24470.780518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24355.000000, 22870.055389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21564.629257, 22249.479462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23833.010620, 21694.984558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25429.851440, 22629.281403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20015.655960, 24038.002777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24889.756000, 23233.172000, 1250.032036, 1250.032036, 0.000000, X, Y) && !ellipse(21642.382000, 20603.062400, 1456.744042, 1456.744042, 0.000000, X, Y)
[Mon Apr 30 09:15:56 2012] Writing fullrun_mos2_xmm0550670901_pi300-10000_pass1_cl_src12.gif
[Mon Apr 30 09:38:14 2012] Mean detx,y = (-1094.53, 3283.60) 
[Mon Apr 30 09:38:15 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Apr 30 09:38:25 2012] Binned source spectrum to 10 counts/bin
[Mon Apr 30 09:38:25 2012] Setting source spectrum file to fullrun_mos2_xmm0550670901_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Mon Apr 30 09:38:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550670901_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Mon Apr 30 14:17:26 2012] Updating aperture counts using extracted products
[Mon Apr 30 14:17:26 2012] Error reading totcts from fullrun_mos2_xmm0550670901_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Mon Apr 30 14:17:29 2012] Calculating source flux in energy range 0.30-8.00
[Mon Apr 30 14:17:29 2012] Using photon index=1.80, rate=0.0201, arf fullrun_mos2_xmm0550670901_pi300-10000_pass1_cl_src12.arf
[Mon Apr 30 14:17:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Apr 30 14:17:29 2012] Updating source flux to 2.4e-13
[Mon Apr 30 14:27:43 2012] Flag b found in src. 12 procflags, skipping spectral fitting
[Mon Apr 30 14:27:43 2012] Flag c found in src. 12 procflags, skipping spectral fitting