[Sun Apr 29 10:13:21 2012] Detection parameters:
  Position = (288.0, 245.0) = 18 52 37.96 0 37 53.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 564.2 +/- 32.8
  Background counts = 75.9
  Rate = 0.02 +/- 0.001

[Sun Apr 29 10:13:26 2012] Off-axis axis estimate = 3.95'
[Sun Apr 29 14:39:31 2012] Using EEF radius (= 8.40 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 14:39:31 2012] Initial guess for spatial extent in simple fitting = 8.40"
[Sun Apr 29 14:39:31 2012] source mask rpix=1.9, npix_max = 23, mask sum = 16, frac = 0.677
[Sun Apr 29 14:39:31 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.40"
[Sun Apr 29 17:38:39 2012] fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_src3.ximg exists
[Sun Apr 29 17:38:39 2012] fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Apr 29 17:38:39 2012] Fit fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_src3 appears to have run properly
[Sun Apr 29 17:38:40 2012] fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Apr 29 17:38:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Apr 29 17:38:40 2012] fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Apr 29 17:38:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Apr 29 17:38:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670901_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 17:39:06 2012] Warning, spatial fit 3 centroid is now closest to src. 12
[Sun Apr 29 17:39:06 2012] Spatial fit model total counts = 2964.570000, observed total counts = 2975.000000
[Sun Apr 29 17:39:06 2012] Offset between fit and detection position for source 11 = 3.042638 pixels
[Sun Apr 29 17:39:06 2012] Warning, changing simple spatial fit ID from 3 to 6
[Sun Apr 29 17:39:06 2012] 2776.870000 total counts/ 1766.030000 bgd. counts: snr = 24.053783
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 3.042638 pixels
  Position = (290.5, 246.8) = 18 52 37.24 0 38 1.0
  Extent = 17.1" x 12.7", rotation angle = 154
  Source counts = 1010.8 +/- 52.7
  Background counts = 1766.0
  Rate = 0.04 +/- 0.002
[Sun Apr 29 17:39:06 2012] Vigneting correction estimate = 1.000000
[Sun Apr 29 17:39:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr 29 17:39:06 2012] Assessing source extent using major
[Sun Apr 29 17:39:06 2012] Source does appear to be extended
[Sun Apr 29 17:39:06 2012] Computing asymmetry using major and minor axis, asym = 1.35
[Sun Apr 29 17:39:06 2012] Source is confused with source 9
[Sun Apr 29 17:39:06 2012] Source is confused with source 8
[Sun Apr 29 22:33:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Apr 29 22:33:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Apr 29 22:33:29 2012] Initial guess for spatial extent in simple fitting = 14.94"
[Sun Apr 29 22:33:29 2012] source mask rpix=3.4, npix_max = 61, mask sum = 56, frac = 0.905
[Sun Apr 29 22:33:29 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 14.94"
[Mon Apr 30 02:42:10 2012] fullrun_mos2_xmm0550670901_pi300-10000_cl_pass1_src3.ximg exists
[Mon Apr 30 02:42:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670901_pi300-10000_cl_pass1_src3.csv
[Mon Apr 30 02:42:11 2012] fullrun_mos2_xmm0550670901_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Apr 30 02:42:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670901_pi300-10000_cl_pass1_src3.csv
[Mon Apr 30 02:42:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670901_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670901_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 02:42:12 2012] fullrun_mos2_xmm0550670901_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Apr 30 02:42:12 2012] fullrun_mos2_xmm0550670901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Apr 30 02:42:12 2012] Fit fullrun_mos2_xmm0550670901_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Apr 30 02:42:38 2012] Spatial fit model total counts = 4457.240000, observed total counts = 4114.000000
[Mon Apr 30 02:42:38 2012] Offset between fit and detection position for source 11 = 7.739950 pixels
[Mon Apr 30 02:42:38 2012] 4348.081000 total counts/ 415.541000 bgd. counts: snr = 192.915094
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 7.739950 pixels
  Position = (284.1, 242.5) = 18 52 39.10 0 37 42.3
  Extent = 29.9 (29.3-59.7)", rotation angle = 0
  Source counts = 3932.5 +/- 65.9
  Background counts = 415.5
  Rate = 0.2 +/- 0.003
[Mon Apr 30 02:42:38 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 02:42:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 02:42:38 2012] Assessing source extent using major axis lower bound
[Mon Apr 30 02:42:38 2012] Source does appear to be extended
[Mon Apr 30 02:42:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 09:15:56 2012] Counts = 3932.540000, rescaling region sizes by 2.000000
[Mon Apr 30 09:15:56 2012] XMMSAS src. selection expression = ellipse(24666.184000, 21046.014000, 3584.412103, 3584.412103, 0.000000, X, Y)
[Mon Apr 30 09:15:56 2012] Writing source region out to fullrun_mos2_xmm0550670901_pi300-10000_pass1_cl_src11_src.reg
[Mon Apr 30 09:15:56 2012] Extracting stamp from image fullrun_mos2_xmm0550670901_pi300-10000_cl_sm2.00.img.gz, (78, 36) - (490, 448)
[Mon Apr 30 09:15:56 2012] XMMSAS bgd. selection expression = annulus(24666.184000, 21046.014000, 11948.040344, 23896.080688, X, Y) && !ellipse(22408.001160, 15759.656400, 501.685614, 501.685614, 0.000000, X, Y) && !ellipse(24851.097140, 24200.101800, 345.335210, 345.335210, 0.000000, X, Y) && !ellipse(26138.441000, 22226.420200, 967.640028, 967.640028, 0.000000, X, Y) && !ellipse(22662.691360, 21906.437800, 742.798421, 742.798421, 0.000000, X, Y) && !ellipse(25469.820000, 21547.272000, 1935.280056, 1935.280056, 0.000000, X, Y) && !ellipse(22095.748000, 22611.530800, 1360.648039, 1360.648039, 0.000000, X, Y) && !ellipse(23732.450400, 20831.300200, 1183.728034, 1183.728034, 0.000000, X, Y) && !ellipse(23141.676000, 22203.792000, 1328.464038, 1328.464038, 0.000000, X, Y) && !ellipse(25950.080000, 22035.000000, 1316.680038, 1316.680038, 0.000000, X, Y) && !ellipse(26080.946400, 23618.033200, 1081.384031, 1081.384031, 0.000000, X, Y) && !ellipse(25300.546000, 24266.480000, 594.254417, 594.254417, 0.000000, X, Y) && !ellipse(22564.299600, 23593.548000, 1292.840037, 1292.840037, 0.000000, X, Y) && !ellipse(24883.076600, 26717.095800, 1113.800032, 706.264820, -0.000000, X, Y) && !ellipse(27625.872740, 26446.876800, 1147.584033, 1147.584033, 0.000000, X, Y) && !ellipse(27107.462200, 23541.554000, 1491.000043, 1491.000043, 0.000000, X, Y) && !ellipse(23807.063019, 22828.780304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27748.711200, 25479.309800, 1151.624033, 1151.624033, 0.000000, X, Y) && !ellipse(20069.701000, 23584.460000, 439.373613, 439.373613, 0.000000, X, Y) && !ellipse(26526.491400, 24782.264000, 1167.384034, 1167.384034, 350.814000, X, Y) && !ellipse(21926.057000, 22999.972000, 2501.880072, 2501.880072, 0.000000, X, Y) && !ellipse(21822.152400, 24729.121600, 927.656027, 927.656027, 0.000000, X, Y) && !ellipse(27486.571364, 27064.367291, 965.549091, 782.628882, 77.405471, X, Y) && !ellipse(22471.426636, 23952.853333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26568.314000, 24981.053000, 1105.496032, 1105.496032, 0.000000, X, Y) && !ellipse(27414.982330, 24470.780518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24355.000000, 22870.055389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21814.103200, 26415.747400, 2102.112060, 829.632024, 97.266880, X, Y) && !ellipse(21564.629257, 22249.479462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25073.735016, 24734.557678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19542.591140, 25330.593400, 762.628022, 762.628022, 0.000000, X, Y) && !ellipse(23833.010620, 21694.984558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25429.851440, 22629.281403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28713.980000, 25013.782000, 1011.992029, 1011.992029, 0.000000, X, Y) && !ellipse(25857.406738, 25873.862610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20015.655960, 24038.002777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19403.310400, 24348.546000, 640.772018, 640.772018, 0.000000, X, Y) && !ellipse(28772.315613, 25779.932983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29059.574000, 26827.862000, 1213.584035, 1213.584035, 0.000000, X, Y) && !ellipse(21734.561752, 25878.591217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21784.738000, 26336.146000, 978.344028, 978.344028, 0.000000, X, Y) && !ellipse(24889.756000, 23233.172000, 1250.032036, 1250.032036, 0.000000, X, Y) && !ellipse(21642.382000, 20603.062400, 1456.744042, 1456.744042, 0.000000, X, Y) && !ellipse(26440.360901, 26226.131897, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Apr 30 09:15:56 2012] Writing fullrun_mos2_xmm0550670901_pi300-10000_pass1_cl_src11.gif
[Mon Apr 30 09:16:42 2012] Mean detx,y = (-360.15, 2031.04) 
[Mon Apr 30 09:16:45 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Apr 30 09:27:16 2012] Binned source spectrum to 10 counts/bin
[Mon Apr 30 09:27:16 2012] Setting source spectrum file to fullrun_mos2_xmm0550670901_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Mon Apr 30 09:27:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550670901_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Mon Apr 30 14:17:26 2012] Updating aperture counts using extracted products
[Mon Apr 30 14:17:26 2012] Error reading totcts from fullrun_mos2_xmm0550670901_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Mon Apr 30 14:17:29 2012] Calculating source flux in energy range 0.30-8.00
[Mon Apr 30 14:17:29 2012] Using photon index=1.80, rate=0.151, arf fullrun_mos2_xmm0550670901_pi300-10000_pass1_cl_src11.arf
[Mon Apr 30 14:17:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Apr 30 14:17:29 2012] Updating source flux to 1.5e-12
[Mon Apr 30 14:27:43 2012] Flag c found in src. 11 procflags, skipping spectral fitting