[Sun Apr 29 10:13:17 2012] Detection parameters:
  Position = (333.2, 283.5) = 18 52 24.86 0 40 38.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.5 +/- 13.2
  Background counts = 40.0
  Rate = 0.002 +/- 0.0006

[Sun Apr 29 10:13:18 2012] Off-axis axis estimate = 2.74'
[Sun Apr 29 10:58:41 2012] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 10:58:41 2012] Initial guess for spatial extent in simple fitting = 7.80"
[Sun Apr 29 10:58:41 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.951
[Sun Apr 29 10:58:41 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 7.80"
[Sun Apr 29 14:39:29 2012] fullrun_mos1_xmm0550670901_pi300-10000_cl_pass0_src55.ximg exists
[Sun Apr 29 14:39:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670901_pi300-10000_cl_pass0_src55.csv
[Sun Apr 29 14:39:29 2012] fullrun_mos1_xmm0550670901_pi300-10000_cl_pass0_src55_1.ximg exists
[Sun Apr 29 14:39:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670901_pi300-10000_cl_pass0_src55.csv
[Sun Apr 29 14:39:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550670901_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550670901_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 14:39:31 2012] fullrun_mos1_xmm0550670901_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Sun Apr 29 14:39:31 2012] fullrun_mos1_xmm0550670901_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Sun Apr 29 14:39:31 2012] Fit fullrun_mos1_xmm0550670901_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Sun Apr 29 17:38:57 2012] Spatial fit model total counts = 1219.580000, observed total counts = 1213.000000
[Sun Apr 29 17:38:57 2012] Offset between fit and detection position for source 41 = 3.249429 pixels
[Sun Apr 29 17:38:57 2012] Warning, changing simple spatial fit ID from 55 to 34
[Sun Apr 29 17:38:57 2012] 1190.466000 total counts/ 1027.690000 bgd. counts: snr = 5.077610
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 3.249429 pixels
  Position = (331.8, 286.5) = 18 52 25.26 0 40 53.8
  Extent = 15.0 (14.9-29.9)", rotation angle = 0
  Source counts = 162.8 +/- 34.5
  Background counts = 1027.7
  Rate = 0.006 +/- 0.001
[Sun Apr 29 17:38:57 2012] Vigneting correction estimate = 1.000000
[Sun Apr 29 17:38:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr 29 17:38:57 2012] Assessing source extent using major axis lower bound
[Sun Apr 29 17:38:57 2012] Source does appear to be extended
[Sun Apr 29 17:38:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr 29 17:38:57 2012] Source is confused with source 35
[Sun Apr 29 18:29:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Apr 29 18:29:47 2012] Initial guess for spatial extent in simple fitting = 14.96"
[Sun Apr 29 18:29:47 2012] source mask rpix=3.4, npix_max = 62, mask sum = 56, frac = 0.902
[Sun Apr 29 18:29:47 2012] Giving source the simple spatial ID 50 for pass 1, mean size = 14.96"
[Sun Apr 29 22:33:27 2012] fullrun_mos1_xmm0550670901_pi300-10000_cl_pass1_src50.ximg exists
[Sun Apr 29 22:33:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670901_pi300-10000_cl_pass1_src50.csv
[Sun Apr 29 22:33:27 2012] fullrun_mos1_xmm0550670901_pi300-10000_cl_pass1_src50_1.ximg exists
[Sun Apr 29 22:33:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670901_pi300-10000_cl_pass1_src50.csv
[Sun Apr 29 22:33:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550670901_pi300-10000_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550670901_pi300-10000_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 22:33:29 2012] fullrun_mos1_xmm0550670901_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Sun Apr 29 22:33:29 2012] fullrun_mos1_xmm0550670901_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Sun Apr 29 22:33:29 2012] Fit fullrun_mos1_xmm0550670901_pi300-10000_cl_pass1_tfrozen_src50 appears to have run properly
[Mon Apr 30 02:42:28 2012] Source 41 is offset by -1.473080 and 5.764276 pixels which is larger than
2 X fitted extent = 1.660083 x 1.660083, not incorporating fit results
[Mon Apr 30 02:42:28 2012] Spatial fit model total counts = 1684.990000, observed total counts = 1693.000000
[Mon Apr 30 02:42:28 2012] Offset between fit and detection position for source 41 = 6.389716 pixels
[Mon Apr 30 02:42:28 2012] Warning, changing simple spatial fit ID from 50 to 46
[Mon Apr 30 02:42:28 2012] 1664.928000 total counts/ 887.417000 bgd. counts: snr = 26.100130
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 6.389716 pixels
  Position = (336.5, 282.1) = 18 52 23.90 0 40 34.9
  Extent = 31.2 (29.0-62.4)", rotation angle = 0
  Source counts = 777.5 +/- 40.8
  Background counts = 887.4
  Rate = 0.03 +/- 0.002
[Mon Apr 30 02:42:28 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 02:42:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 02:42:28 2012] Assessing source extent using major axis lower bound
[Mon Apr 30 02:42:28 2012] Source does appear to be extended
[Mon Apr 30 02:42:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 05:33:13 2012] XMMSAS src. selection expression = ellipse(29226.150000, 24497.340000, 1871.772054, 1871.772054, 0.000000, X, Y)
[Mon Apr 30 05:33:13 2012] Writing source region out to fullrun_mos1_xmm0550670901_pi300-10000_pass1_cl_src41_src.reg
[Mon Apr 30 05:33:13 2012] Extracting stamp from image fullrun_mos1_xmm0550670901_pi300-10000_cl_sm2.00.img.gz, (229, 175) - (444, 390)
[Mon Apr 30 05:33:13 2012] XMMSAS bgd. selection expression = annulus(29226.150000, 24497.340000, 3119.620090, 6239.240180, X, Y) && !ellipse(24844.914440, 24232.993400, 301.818409, 301.818409, 0.000000, X, Y) && !ellipse(24779.568000, 21182.564000, 1336.408038, 1336.408038, 0.000000, X, Y) && !ellipse(22957.088000, 21875.332000, 1391.664040, 1391.664040, 0.000000, X, Y) && !ellipse(26297.207800, 22239.737000, 1271.856037, 1271.856037, 0.000000, X, Y) && !ellipse(23980.492188, 21076.368042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22524.010200, 23267.766000, 1281.152037, 1281.152037, 0.000000, X, Y) && !ellipse(25783.910000, 23525.408000, 784.826423, 784.826423, 0.000000, X, Y) && !ellipse(26301.666000, 24732.894000, 1263.424036, 1263.424036, 0.000000, X, Y) && !ellipse(23371.909027, 21099.537155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26772.935200, 23603.655000, 1200.768035, 1200.768035, 0.000000, X, Y) && !ellipse(27812.638600, 25483.090600, 1155.416033, 1155.416033, 0.000000, X, Y) && !ellipse(24123.368000, 22996.370000, 1298.464037, 1298.464037, 0.000000, X, Y) && !ellipse(25038.618000, 26711.102000, 1116.800032, 1116.800032, 0.000000, X, Y) && !ellipse(25915.384613, 22910.385284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26044.864000, 23587.796000, 1170.912034, 1170.912034, 0.000000, X, Y) && !ellipse(23320.783783, 22822.886139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27602.104600, 26403.634000, 1148.080033, 1148.080033, 0.000000, X, Y) && !ellipse(27013.660600, 23611.584800, 1201.728035, 841.168024, 151.783000, X, Y) && !ellipse(25228.256000, 23817.934000, 1334.376038, 1334.376038, 0.000000, X, Y) && !ellipse(26983.994080, 22964.452301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26404.653412, 22915.998016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27779.898000, 25719.488000, 2394.128069, 2394.128069, 0.000000, X, Y) && !ellipse(27084.093994, 24394.209473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27476.756000, 26522.402000, 2344.944067, 2344.944067, 0.000000, X, Y) && !ellipse(26741.444000, 25385.018000, 668.952819, 668.952819, 0.000000, X, Y) && !ellipse(22201.311920, 20855.879807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23140.268000, 21955.794000, 1285.296037, 1285.296037, 0.000000, X, Y) && !ellipse(21874.547000, 26568.586000, 1260.696036, 1260.696036, 0.000000, X, Y) && !ellipse(21906.041000, 26845.172000, 1090.072031, 1090.072031, 0.000000, X, Y) && !ellipse(28654.060608, 26052.344299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25801.709534, 25967.152374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26599.511322, 26230.701202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21755.169200, 25456.086000, 1303.368038, 1303.368038, 0.000000, X, Y) && !ellipse(28565.348000, 25025.936000, 1247.848036, 1247.848036, 0.000000, X, Y) && !ellipse(26280.334320, 25769.411102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25556.042328, 27189.121643, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Apr 30 05:33:13 2012] Writing fullrun_mos1_xmm0550670901_pi300-10000_pass1_cl_src41.gif
[Mon Apr 30 05:51:15 2012] Mean detx,y = (-193.16, -4098.19) 
[Mon Apr 30 05:51:16 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Apr 30 05:52:15 2012] Binned source spectrum to 10 counts/bin
[Mon Apr 30 05:52:15 2012] Setting source spectrum file to fullrun_mos1_xmm0550670901_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Mon Apr 30 05:52:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550670901_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Mon Apr 30 14:17:23 2012] Updating aperture counts using extracted products
[Mon Apr 30 14:17:23 2012] Error reading totcts from fullrun_mos1_xmm0550670901_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Mon Apr 30 14:17:26 2012] Calculating source flux in energy range 0.30-8.00
[Mon Apr 30 14:17:26 2012] Using photon index=1.80, rate=0.0298, arf fullrun_mos1_xmm0550670901_pi300-10000_pass1_cl_src41.arf
[Mon Apr 30 14:17:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Apr 30 14:17:26 2012] Updating source flux to 3e-13
[Mon Apr 30 14:17:33 2012] Flag b found in src. 41 procflags, skipping spectral fitting
[Mon Apr 30 14:17:33 2012] Flag c found in src. 41 procflags, skipping spectral fitting