[Sun Apr 29 10:13:16 2012] Detection parameters:
  Position = (330.1, 295.0) = 18 52 25.76 0 41 28.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.3 +/- 14.6
  Background counts = 40.9
  Rate = 0.003 +/- 0.0007

[Sun Apr 29 10:13:18 2012] Off-axis axis estimate = 2.31'
[Sun Apr 29 10:58:41 2012] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 10:58:41 2012] Initial guess for spatial extent in simple fitting = 7.58"
[Sun Apr 29 10:58:41 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.795
[Sun Apr 29 10:58:41 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 7.58"
[Sun Apr 29 14:39:29 2012] fullrun_mos1_xmm0550670901_pi300-10000_cl_pass0_src49.ximg exists
[Sun Apr 29 14:39:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670901_pi300-10000_cl_pass0_src49.csv
[Sun Apr 29 14:39:29 2012] fullrun_mos1_xmm0550670901_pi300-10000_cl_pass0_src49_1.ximg exists
[Sun Apr 29 14:39:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670901_pi300-10000_cl_pass0_src49.csv
[Sun Apr 29 14:39:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550670901_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550670901_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 14:39:31 2012] fullrun_mos1_xmm0550670901_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Sun Apr 29 14:39:31 2012] fullrun_mos1_xmm0550670901_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Sun Apr 29 14:39:31 2012] Fit fullrun_mos1_xmm0550670901_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Sun Apr 29 17:38:57 2012] Warning, spatial fit 49 centroid is now closest to src. 39
[Sun Apr 29 17:38:57 2012] Spatial fit model total counts = 680.007000, observed total counts = 679.000000
[Sun Apr 29 17:38:57 2012] Offset between fit and detection position for source 35 = 6.871338 pixels
[Sun Apr 29 17:38:57 2012] Warning, changing simple spatial fit ID from 49 to 55
[Sun Apr 29 17:38:57 2012] 674.669000 total counts/ 498.297000 bgd. counts: snr = 7.901063
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 6.871338 pixels
  Position = (328.9, 288.2) = 18 52 26.11 0 41 1.3
  Extent = 15.6 (15.6-31.2)", rotation angle = 0
  Source counts = 176.4 +/- 26.0
  Background counts = 498.3
  Rate = 0.007 +/- 0.001
[Sun Apr 29 17:38:57 2012] Vigneting correction estimate = 1.000000
[Sun Apr 29 17:38:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr 29 17:38:57 2012] Assessing source extent using major axis lower bound
[Sun Apr 29 17:38:57 2012] Source does appear to be extended
[Sun Apr 29 17:38:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr 29 17:38:57 2012] Source is confused with source 15
[Sun Apr 29 18:29:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Apr 29 18:29:47 2012] Initial guess for spatial extent in simple fitting = 15.60"
[Sun Apr 29 18:29:47 2012] source mask rpix=3.6, npix_max = 66, mask sum = 64, frac = 0.958
[Sun Apr 29 18:29:47 2012] Giving source the simple spatial ID 46 for pass 1, mean size = 15.60"
[Sun Apr 29 22:33:27 2012] fullrun_mos1_xmm0550670901_pi300-10000_cl_pass1_src46.ximg exists
[Sun Apr 29 22:33:27 2012] fullrun_mos1_xmm0550670901_pi300-10000_cl_pass1_src46_1.ximg exists
[Sun Apr 29 22:33:27 2012] Fit fullrun_mos1_xmm0550670901_pi300-10000_cl_pass1_src46 appears to have run properly
[Sun Apr 29 22:33:29 2012] fullrun_mos1_xmm0550670901_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Sun Apr 29 22:33:29 2012] fullrun_mos1_xmm0550670901_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Sun Apr 29 22:33:29 2012] Fit fullrun_mos1_xmm0550670901_pi300-10000_cl_pass1_tfrozen_src46 appears to have run properly
[Mon Apr 30 02:42:28 2012] Source 35 is offset by -0.247701 and -3.634460 pixels which is larger than
2 X fitted extent = 1.671963 x 1.671963, not incorporating fit results
[Mon Apr 30 02:42:28 2012] Source 35 is offset by 6.654023 and 3.971126 pixels which is larger than
2 X fitted extent = 1.467600 x 1.467600, not incorporating fit results
[Mon Apr 30 02:42:28 2012] Warning, spatial fit 46 centroid is now closest to src. 41
[Mon Apr 30 02:42:28 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 02:42:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 02:42:28 2012] Assessing source extent using major axis lower bound
[Mon Apr 30 02:42:28 2012] Source does appear to be extended
[Mon Apr 30 02:42:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 05:33:12 2012] XMMSAS src. selection expression = ellipse(28565.348000, 25025.936000, 935.886027, 935.886027, 0.000000, X, Y)
[Mon Apr 30 05:33:12 2012] Writing source region out to fullrun_mos1_xmm0550670901_pi300-10000_pass1_cl_src35_src.reg
[Mon Apr 30 05:33:12 2012] Extracting stamp from image fullrun_mos1_xmm0550670901_pi300-10000_cl_sm2.00.img.gz, (275, 234) - (383, 342)
[Mon Apr 30 05:33:12 2012] XMMSAS bgd. selection expression = annulus(28565.348000, 25025.936000, 1559.810045, 3119.620090, X, Y) && !ellipse(24779.568000, 21182.564000, 1336.408038, 1336.408038, 0.000000, X, Y) && !ellipse(26297.207800, 22239.737000, 1271.856037, 1271.856037, 0.000000, X, Y) && !ellipse(25783.910000, 23525.408000, 784.826423, 784.826423, 0.000000, X, Y) && !ellipse(26301.666000, 24732.894000, 1263.424036, 1263.424036, 0.000000, X, Y) && !ellipse(26772.935200, 23603.655000, 1200.768035, 1200.768035, 0.000000, X, Y) && !ellipse(27812.638600, 25483.090600, 1155.416033, 1155.416033, 0.000000, X, Y) && !ellipse(25038.618000, 26711.102000, 1116.800032, 1116.800032, 0.000000, X, Y) && !ellipse(25915.384613, 22910.385284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26044.864000, 23587.796000, 1170.912034, 1170.912034, 0.000000, X, Y) && !ellipse(27602.104600, 26403.634000, 1148.080033, 1148.080033, 0.000000, X, Y) && !ellipse(27013.660600, 23611.584800, 1201.728035, 841.168024, 151.783000, X, Y) && !ellipse(25228.256000, 23817.934000, 1334.376038, 1334.376038, 0.000000, X, Y) && !ellipse(26983.994080, 22964.452301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26404.653412, 22915.998016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27779.898000, 25719.488000, 2394.128069, 2394.128069, 0.000000, X, Y) && !ellipse(27084.093994, 24394.209473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27476.756000, 26522.402000, 2344.944067, 2344.944067, 0.000000, X, Y) && !ellipse(26741.444000, 25385.018000, 668.952819, 668.952819, 0.000000, X, Y) && !ellipse(28654.060608, 26052.344299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25801.709534, 25967.152374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26599.511322, 26230.701202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26280.334320, 25769.411102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25556.042328, 27189.121643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29226.150000, 24497.340000, 2495.696072, 2495.696072, 0.000000, X, Y)
[Mon Apr 30 05:33:12 2012] Writing fullrun_mos1_xmm0550670901_pi300-10000_pass1_cl_src35.gif
[Mon Apr 30 05:50:05 2012] Mean detx,y = (-559.50, -3875.64) 
[Mon Apr 30 05:50:06 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Apr 30 05:50:18 2012] Binned source spectrum to 10 counts/bin
[Mon Apr 30 05:50:18 2012] Setting source spectrum file to fullrun_mos1_xmm0550670901_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Mon Apr 30 05:50:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550670901_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Mon Apr 30 14:17:23 2012] Updating aperture counts using extracted products
[Mon Apr 30 14:17:23 2012] Error reading totcts from fullrun_mos1_xmm0550670901_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Mon Apr 30 14:17:25 2012] Calculating source flux in energy range 0.30-8.00
[Mon Apr 30 14:17:25 2012] Using photon index=1.80, rate=0.00676, arf fullrun_mos1_xmm0550670901_pi300-10000_pass1_cl_src35.arf
[Mon Apr 30 14:17:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Apr 30 14:17:26 2012] Updating source flux to 7.3e-14
[Mon Apr 30 14:17:33 2012] Flag b found in src. 35 procflags, skipping spectral fitting
[Mon Apr 30 14:17:33 2012] Flag c found in src. 35 procflags, skipping spectral fitting