[Sun Apr 29 10:13:16 2012] Detection parameters:
  Position = (253.6, 304.9) = 18 52 47.93 0 42 13.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 137.4 +/- 19.8
  Background counts = 76.5
  Rate = 0.006 +/- 0.0008

[Sun Apr 29 10:13:18 2012] Off-axis axis estimate = 3.28'
[Sun Apr 29 10:58:41 2012] Using EEF radius (= 8.07 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 10:58:41 2012] Initial guess for spatial extent in simple fitting = 8.07"
[Sun Apr 29 10:58:41 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.901
[Sun Apr 29 10:58:41 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 8.07"
[Sun Apr 29 14:39:29 2012] fullrun_mos1_xmm0550670901_pi300-10000_cl_pass0_src36.ximg exists
[Sun Apr 29 14:39:29 2012] fullrun_mos1_xmm0550670901_pi300-10000_cl_pass0_src36_1.ximg exists
[Sun Apr 29 14:39:29 2012] Fit fullrun_mos1_xmm0550670901_pi300-10000_cl_pass0_src36 appears to have run properly
[Sun Apr 29 14:39:31 2012] fullrun_mos1_xmm0550670901_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Sun Apr 29 14:39:31 2012] fullrun_mos1_xmm0550670901_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Sun Apr 29 14:39:31 2012] Fit fullrun_mos1_xmm0550670901_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Sun Apr 29 17:38:57 2012] Warning, spatial fit 36 centroid is now closest to src. 27
[Sun Apr 29 17:38:57 2012] Spatial fit model total counts = 847.983000, observed total counts = 848.000000
[Sun Apr 29 17:38:57 2012] Offset between fit and detection position for source 29 = 3.239366 pixels
[Sun Apr 29 17:38:57 2012] Warning, changing simple spatial fit ID from 36 to 39
[Sun Apr 29 17:38:57 2012] 762.557000 total counts/ 393.279000 bgd. counts: snr = 18.621002
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 3.239366 pixels
  Position = (251.6, 307.4) = 18 52 48.53 0 42 24.9
  Extent = 15.4 (13.4-16.4)", rotation angle = 0
  Source counts = 369.3 +/- 27.6
  Background counts = 393.3
  Rate = 0.01 +/- 0.001
[Sun Apr 29 17:38:57 2012] Vigneting correction estimate = 1.000000
[Sun Apr 29 17:38:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr 29 17:38:57 2012] Assessing source extent using major axis lower bound
[Sun Apr 29 17:38:57 2012] Source does appear to be extended
[Sun Apr 29 17:38:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr 29 17:38:57 2012] Source is confused with source 27
[Sun Apr 29 17:38:57 2012] Source is confused with source 24
[Sun Apr 29 18:29:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Apr 29 18:29:47 2012] Initial guess for spatial extent in simple fitting = 15.39"
[Sun Apr 29 18:29:47 2012] source mask rpix=3.5, npix_max = 65, mask sum = 64, frac = 0.981
[Sun Apr 29 18:29:47 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 15.39"
[Sun Apr 29 22:33:27 2012] fullrun_mos1_xmm0550670901_pi300-10000_cl_pass1_src33.ximg exists
[Sun Apr 29 22:33:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670901_pi300-10000_cl_pass1_src33.csv
[Sun Apr 29 22:33:27 2012] fullrun_mos1_xmm0550670901_pi300-10000_cl_pass1_src33_1.ximg exists
[Sun Apr 29 22:33:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670901_pi300-10000_cl_pass1_src33.csv
[Sun Apr 29 22:33:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550670901_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550670901_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 22:33:28 2012] fullrun_mos1_xmm0550670901_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Sun Apr 29 22:33:28 2012] fullrun_mos1_xmm0550670901_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Sun Apr 29 22:33:28 2012] Fit fullrun_mos1_xmm0550670901_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Mon Apr 30 02:42:28 2012] Warning, spatial fit 33 centroid is now closest to src. 24
[Mon Apr 30 02:42:28 2012] Source 29 is offset by 3.444543 and 3.805908 pixels which is larger than
2 X fitted extent = 1.902078 x 1.902078, not incorporating fit results
[Mon Apr 30 02:42:28 2012] Spatial fit model total counts = 1464.120000, observed total counts = 1466.000000
[Mon Apr 30 02:42:28 2012] Offset between fit and detection position for source 29 = 1.548573 pixels
[Mon Apr 30 02:42:28 2012] Warning, changing simple spatial fit ID from 33 to 51
[Mon Apr 30 02:42:28 2012] 1346.238000 total counts/ 943.644000 bgd. counts: snr = 13.105790
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 1.548573 pixels
  Position = (252.0, 305.9) = 18 52 48.41 0 42 18.5
  Extent = 15.8 (13.5-19.1)", rotation angle = 0
  Source counts = 402.6 +/- 36.7
  Background counts = 943.6
  Rate = 0.02 +/- 0.001
[Mon Apr 30 02:42:28 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 02:42:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 02:42:28 2012] Assessing source extent using major axis lower bound
[Mon Apr 30 02:42:28 2012] Source does appear to be extended
[Mon Apr 30 02:42:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 05:33:12 2012] XMMSAS src. selection expression = ellipse(21874.547000, 26568.586000, 945.522027, 945.522027, 0.000000, X, Y)
[Mon Apr 30 05:33:12 2012] Writing source region out to fullrun_mos1_xmm0550670901_pi300-10000_pass1_cl_src29_src.reg
[Mon Apr 30 05:33:12 2012] Extracting stamp from image fullrun_mos1_xmm0550670901_pi300-10000_cl_sm2.00.img.gz, (198, 252) - (306, 360)
[Mon Apr 30 05:33:12 2012] XMMSAS bgd. selection expression = annulus(21874.547000, 26568.586000, 1575.870045, 3151.740091, X, Y) && !ellipse(24844.914440, 24232.993400, 301.818409, 301.818409, 0.000000, X, Y) && !ellipse(26297.207800, 22239.737000, 1271.856037, 1271.856037, 0.000000, X, Y) && !ellipse(22524.010200, 23267.766000, 1281.152037, 1281.152037, 0.000000, X, Y) && !ellipse(25783.910000, 23525.408000, 784.826423, 784.826423, 0.000000, X, Y) && !ellipse(24123.368000, 22996.370000, 1298.464037, 1298.464037, 0.000000, X, Y) && !ellipse(25038.618000, 26711.102000, 1116.800032, 1116.800032, 0.000000, X, Y) && !ellipse(26044.864000, 23587.796000, 1170.912034, 1170.912034, 0.000000, X, Y) && !ellipse(23320.783783, 22822.886139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25228.256000, 23817.934000, 1334.376038, 1334.376038, 0.000000, X, Y) && !ellipse(20084.516200, 23416.603600, 756.360022, 756.360022, 0.000000, X, Y) && !ellipse(21610.867200, 23148.060000, 1147.792033, 1147.792033, 0.000000, X, Y) && !ellipse(21808.375549, 24738.006561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19407.249800, 24291.900000, 495.677614, 495.677614, 0.000000, X, Y) && !ellipse(19596.407000, 24978.504000, 1456.320042, 1456.320042, 0.000000, X, Y) && !ellipse(21906.041000, 26845.172000, 1090.072031, 1090.072031, 0.000000, X, Y) && !ellipse(25801.709534, 25967.152374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20050.298200, 22950.944000, 851.112024, 851.112024, 0.000000, X, Y) && !ellipse(21755.169200, 25456.086000, 1303.368038, 1303.368038, 0.000000, X, Y) && !ellipse(19434.395706, 23801.994568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25556.042328, 27189.121643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21923.384000, 27100.788000, 846.368024, 846.368024, 0.000000, X, Y) && !ellipse(19968.089400, 22082.474000, 1507.072043, 1507.072043, 0.000000, X, Y)
[Mon Apr 30 05:33:12 2012] Writing fullrun_mos1_xmm0550670901_pi300-10000_pass1_cl_src29.gif
[Mon Apr 30 05:46:51 2012] Mean detx,y = (-2084.02, 2615.41) 
[Mon Apr 30 05:46:52 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Apr 30 05:47:01 2012] Binned source spectrum to 10 counts/bin
[Mon Apr 30 05:47:01 2012] Setting source spectrum file to fullrun_mos1_xmm0550670901_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Mon Apr 30 05:47:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550670901_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Mon Apr 30 14:17:22 2012] Updating aperture counts using extracted products
[Mon Apr 30 14:17:22 2012] Error reading totcts from fullrun_mos1_xmm0550670901_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Mon Apr 30 14:17:25 2012] Calculating source flux in energy range 0.30-8.00
[Mon Apr 30 14:17:25 2012] Using photon index=1.80, rate=0.0154, arf fullrun_mos1_xmm0550670901_pi300-10000_pass1_cl_src29.arf
[Mon Apr 30 14:17:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Apr 30 14:17:25 2012] Updating source flux to 1.5e-13
[Mon Apr 30 14:17:33 2012] Flag b found in src. 29 procflags, skipping spectral fitting
[Mon Apr 30 14:17:33 2012] Flag c found in src. 29 procflags, skipping spectral fitting