[Mon May  6 09:37:16 2013] Detection parameters:
  Position = (321.2, 286.0) = 18 52 36.44 0 38 10.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1013.7 +/- 40.9
  Background counts = 67.9
  Rate = 0.03 +/- 0.001

[Mon May  6 09:37:17 2013] Off-axis axis estimate = 1.88'
[Mon May  6 12:45:51 2013] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Mon May  6 12:45:51 2013] Initial guess for spatial extent in simple fitting = 7.37"
[Mon May  6 12:45:51 2013] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.779
[Mon May  6 12:45:51 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.37"
[Mon May  6 15:17:50 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_src3.ximg exists
[Mon May  6 15:17:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_src3.csv
[Mon May  6 15:17:50 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon May  6 15:17:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_src3.csv
[Mon May  6 15:17:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 15:17:51 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon May  6 15:17:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon May  6 15:17:51 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon May  6 15:17:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon May  6 15:17:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 15:18:10 2013] Warning, spatial fit 3 centroid is now closest to src. 10
[Mon May  6 15:18:10 2013] Spatial fit model total counts = 4540.410000, observed total counts = 4203.000000
[Mon May  6 15:18:10 2013] Offset between fit and detection position for source 9 = 0.705235 pixels
[Mon May  6 15:18:10 2013] Warning, changing simple spatial fit ID from 3 to 11
[Mon May  6 15:18:10 2013] 4753.570000 total counts/ 3238.520000 bgd. counts: snr = 26.622797
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.705235 pixels
  Position = (320.5, 286.1) = 18 52 36.64 0 38 10.5
  Extent = 14.8 (14.8-29.7)", rotation angle = 0
  Source counts = 1515.0 +/- 68.9
  Background counts = 3238.5
  Rate = 0.04 +/- 0.002
[Mon May  6 15:18:10 2013] Vigneting correction estimate = 1.000000
[Mon May  6 15:18:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 15:18:10 2013] Assessing source extent using major axis lower bound
[Mon May  6 15:18:10 2013] Source does appear to be extended
[Mon May  6 15:18:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  6 15:18:10 2013] Source is confused with source 10
[Mon May  6 15:18:10 2013] Source is confused with source 7
[Mon May  6 18:27:38 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May  6 18:27:38 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May  6 18:27:38 2013] Initial guess for spatial extent in simple fitting = 14.83"
[Mon May  6 18:27:38 2013] source mask rpix=3.4, npix_max = 61, mask sum = 37, frac = 0.605
[Mon May  6 18:27:38 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 14.83"
[Mon May  6 20:25:43 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_src3.ximg exists
[Mon May  6 20:25:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_src3.csv
[Mon May  6 20:25:43 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon May  6 20:25:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_src3.csv
[Mon May  6 20:25:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 20:25:44 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon May  6 20:25:44 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon May  6 20:25:44 2013] Fit fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon May  6 20:26:00 2013] Warning, spatial fit 3 centroid is now closest to src. 7
[Mon May  6 20:26:00 2013] Spatial fit model total counts = 4983.240000, observed total counts = 4738.000000
[Mon May  6 20:26:00 2013] Offset between fit and detection position for source 9 = 1.314125 pixels
[Mon May  6 20:26:00 2013] Warning, changing simple spatial fit ID from 3 to 11
[Mon May  6 20:26:00 2013] 5090.490000 total counts/ 3698.650000 bgd. counts: snr = 22.885884
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.314125 pixels
  Position = (321.8, 285.8) = 18 52 36.27 0 38 9.2
  Extent = 25.7 (24.9-51.4)" x 12.4 (10.5-13.9)", rotation angle = 317 (310-321) degrees
  Source counts = 1391.8 +/- 71.3
  Background counts = 3698.7
  Rate = 0.04 +/- 0.002
[Mon May  6 20:26:00 2013] Vigneting correction estimate = 1.000000
[Mon May  6 20:26:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 20:26:00 2013] Assessing source extent using major axis lower bound
[Mon May  6 20:26:00 2013] Source does appear to be extended
[Mon May  6 20:26:00 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.79
[Mon May  6 20:26:00 2013] Source is asymmetric
[Tue May  7 00:17:31 2013] Counts = 1391.840000, rescaling region sizes by 2.000000
[Tue May  7 00:17:31 2013] XMMSAS src. selection expression = ellipse(27944.046000, 24816.311000, 3085.644089, 1491.456043, 316.905700, X, Y)
[Tue May  7 00:17:31 2013] Writing source region out to fullrun_mos2_xmm0550670601_pi300-10000_pass1_cl_src9_src.reg
[Tue May  7 00:17:31 2013] Extracting stamp from image fullrun_mos2_xmm0550670601_pi300-10000_cl_sm2.00.img.gz, (144, 108) - (499, 463)
[Tue May  7 00:17:31 2013] XMMSAS bgd. selection expression = annulus(27944.046000, 24816.311000, 10285.480296, 20570.960592, X, Y) && !ellipse(24829.334240, 19005.697200, 578.540817, 401.776012, 16.459897, X, Y) && !ellipse(27296.005157, 27439.589142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27134.329803, 24412.024719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25211.380200, 25134.146400, 948.584027, 948.584027, 0.000000, X, Y) && !ellipse(28818.316400, 25598.424000, 1213.808035, 783.079223, 142.395400, X, Y) && !ellipse(24575.711200, 25859.834600, 1786.824051, 605.121617, 36.214000, X, Y) && !ellipse(26186.437400, 24147.897600, 1148.384033, 1148.384033, 0.000000, X, Y) && !ellipse(24918.899498, 26581.620400, 1100.032032, 678.696020, 99.729130, X, Y) && !ellipse(28469.906000, 25387.972000, 1996.888057, 1081.904031, 147.694000, X, Y) && !ellipse(26420.125200, 26106.876000, 998.168029, 998.168029, 0.000000, X, Y) && !ellipse(28647.131880, 28100.934000, 1260.248036, 527.414415, 332.766800, X, Y) && !ellipse(25048.120600, 26956.306000, 1778.728051, 846.400024, 113.544800, X, Y) && !ellipse(24186.200000, 26161.253800, 1159.032033, 633.285618, 41.425000, X, Y) && !ellipse(24205.083420, 28054.650200, 1059.328030, 780.796022, 92.170530, X, Y) && !ellipse(27260.567800, 30040.503400, 2004.672058, 728.997621, 347.497000, X, Y) && !ellipse(27608.995941, 28046.003143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27020.259125, 26401.281525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24509.642181, 27259.392303, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27542.755615, 29886.320770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28831.347534, 27535.095856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26219.173065, 25536.429626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26360.293182, 35505.292023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22492.843160, 26847.216200, 416.307212, 287.765608, 128.344000, X, Y) && !ellipse(29856.214600, 30275.620800, 1423.376041, 596.778417, 84.905200, X, Y) && !ellipse(22511.916000, 26710.334000, 704.072820, 454.616013, 87.131430, X, Y) && !ellipse(24562.430800, 23940.300800, 703.426420, 703.426420, 0.000000, X, Y) && !ellipse(27833.444153, 30286.407135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29752.452000, 27728.114000, 1344.768039, 1344.768039, 0.000000, X, Y) && !ellipse(42856.399078, 21711.982056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24258.934000, 28135.864000, 699.130420, 699.130420, 0.000000, X, Y) && !ellipse(24160.949800, 29485.568000, 2046.984059, 868.920025, 104.072700, X, Y) && !ellipse(28284.931885, 29181.572449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21916.874000, 28293.301000, 1781.376051, 443.118413, 277.803400, X, Y) && !ellipse(24944.058075, 24408.453705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22505.282000, 26910.382000, 1272.880037, 442.321613, 94.439350, X, Y) && !ellipse(21258.703820, 14241.358200, 618.545618, 218.179206, 22.457016, X, Y) && !ellipse(29384.799011, 29964.922913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24434.656000, 23911.448000, 1148.104033, 1148.104033, 0.000000, X, Y) && !ellipse(31440.904144, 28766.105499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24349.707000, 30249.496000, 1303.104037, 772.694422, 112.654100, X, Y) && !ellipse(21831.718000, 27356.940000, 1155.896033, 161.593605, 86.555040, X, Y) && !ellipse(24023.389496, 24741.075775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22423.078552, 27787.828094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26892.602661, 27537.283600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22417.005200, 25432.751600, 1874.432054, 568.161616, 93.113663, X, Y) && !ellipse(26257.102000, 27907.608000, 1154.800033, 963.816028, 105.848300, X, Y)
[Tue May  7 00:17:31 2013] Writing fullrun_mos2_xmm0550670601_pi300-10000_pass1_cl_src9.gif
[Tue May  7 00:20:18 2013] Mean detx,y = (-413.35, -2033.38) 
[Tue May  7 00:20:19 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May  7 00:26:31 2013] Binned source spectrum to 10 counts/bin
[Tue May  7 00:26:31 2013] Setting source spectrum file to fullrun_mos2_xmm0550670601_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Tue May  7 00:26:31 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0550670601_pi300-10000_pass1_cl_src9_bgd.pi.gz