[Mon May  6 09:37:17 2013] Detection parameters:
  Position = (284.9, 211.4) = 18 52 46.94 0 32 38.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.3 +/- 12.9
  Background counts = 19.3
  Rate = 0.002 +/- 0.0005

[Mon May  6 09:37:17 2013] Off-axis axis estimate = 6.39'
[Mon May  6 12:45:51 2013] Using EEF radius (= 9.62 ")to estimate initial spatial extent for simple fitting
[Mon May  6 12:45:51 2013] Initial guess for spatial extent in simple fitting = 9.62"
[Mon May  6 12:45:51 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.020
[Mon May  6 12:45:51 2013] Giving source the simple spatial ID 52 for pass 0, mean size = 9.62"
[Mon May  6 15:17:51 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_src52.ximg exists
[Mon May  6 15:17:51 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_src52.csv
[Mon May  6 15:17:51 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_src52_1.ximg exists
[Mon May  6 15:17:51 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_src52.csv
[Mon May  6 15:17:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 15:17:52 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Mon May  6 15:17:52 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src52.csv
[Mon May  6 15:17:52 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Mon May  6 15:17:52 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src52.csv
[Mon May  6 15:17:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 15:18:10 2013] Source 58 is offset by -2.222635 and 6.361088 pixels which is larger than
2 X fitted extent = 8.848736 x 6.341609, not incorporating fit results
[Mon May  6 15:18:10 2013] Vigneting correction estimate = 1.000000
[Mon May  6 15:18:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 15:18:10 2013] Assessing source extent using major
[Mon May  6 15:18:10 2013] Source does appear to be extended
[Mon May  6 15:18:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  6 15:18:10 2013] Deleting source due to low Poisson probability 0.9