[Mon May  6 09:37:16 2013] Detection parameters:
  Position = (204.3, 471.0) = 18 53 10.33 0 51 37.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.5 +/- 9.0
  Background counts = 11.7
  Rate = 0.001 +/- 0.0003

[Mon May  6 09:37:17 2013] Off-axis axis estimate = 14.25'
[Mon May  6 12:45:51 2013] Using EEF radius (= 13.56 ")to estimate initial spatial extent for simple fitting
[Mon May  6 12:45:51 2013] Initial guess for spatial extent in simple fitting = 13.56"
[Mon May  6 12:45:51 2013] source mask rpix=3.1, npix_max = 52, mask sum = 44, frac = 0.841
[Mon May  6 12:45:51 2013] Giving source the simple spatial ID 59 for pass 0, mean size = 13.56"
[Mon May  6 15:17:51 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_src59.ximg exists
[Mon May  6 15:17:51 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_src59.csv
[Mon May  6 15:17:51 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_src59_1.ximg exists
[Mon May  6 15:17:51 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_src59.csv
[Mon May  6 15:17:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 15:17:52 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Mon May  6 15:17:52 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src59.csv
[Mon May  6 15:17:52 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Mon May  6 15:17:52 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src59.csv
[Mon May  6 15:17:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 15:18:10 2013] Warning, spatial fit 20 centroid is now closest to src. 42
[Mon May  6 15:18:10 2013] Warning, spatial fit 44 centroid is now closest to src. 52
[Mon May  6 15:18:10 2013] Warning, spatial fit 46 centroid is now closest to src. 38
[Mon May  6 15:18:10 2013] Warning, spatial fit 54 centroid is now closest to src. 47
[Mon May  6 15:18:10 2013] Warning: source 59 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 17.416367 pixels away
[Mon May  6 15:18:10 2013] Vigneting correction estimate = 1.000000
[Mon May  6 15:18:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 15:18:10 2013] Assessing source extent using major
[Mon May  6 15:18:10 2013] Source does appear to be extended
[Mon May  6 15:18:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  6 15:18:10 2013] Deleting source due to low Poisson probability 0.9