[Mon May  6 09:37:16 2013] Detection parameters:
  Position = (317.9, 322.9) = 18 52 37.38 0 40 51.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 336.5 +/- 28.1
  Background counts = 104.8
  Rate = 0.01 +/- 0.0009

[Mon May  6 09:37:17 2013] Off-axis axis estimate = 2.27'
[Mon May  6 12:45:51 2013] Using EEF radius (= 7.56 ")to estimate initial spatial extent for simple fitting
[Mon May  6 12:45:51 2013] Initial guess for spatial extent in simple fitting = 7.56"
[Mon May  6 12:45:51 2013] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.798
[Mon May  6 12:45:51 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 7.56"
[Mon May  6 15:17:50 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_src19.ximg exists
[Mon May  6 15:17:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_src19.csv
[Mon May  6 15:17:50 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_src19_1.ximg exists
[Mon May  6 15:17:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_src19.csv
[Mon May  6 15:17:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 15:17:51 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Mon May  6 15:17:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src19.csv
[Mon May  6 15:17:51 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Mon May  6 15:17:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src19.csv
[Mon May  6 15:17:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 15:18:10 2013] Warning, spatial fit 19 centroid is now closest to src. 13
[Mon May  6 15:18:10 2013] Vigneting correction estimate = 1.000000
[Mon May  6 15:18:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 15:18:10 2013] Assessing source extent using major
[Mon May  6 15:18:10 2013] Source does appear to be extended
[Mon May  6 15:18:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  6 18:27:38 2013] Using EEF radius (= 7.56 ")to estimate initial spatial extent for simple fitting
[Mon May  6 18:27:38 2013] Initial guess for spatial extent in simple fitting = 7.56"
[Mon May  6 18:27:38 2013] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.798
[Mon May  6 18:27:38 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 7.56"
[Mon May  6 20:25:44 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_src18.ximg exists
[Mon May  6 20:25:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_src18.csv
[Mon May  6 20:25:44 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_src18_1.ximg exists
[Mon May  6 20:25:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_src18.csv
[Mon May  6 20:25:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 20:25:44 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Mon May  6 20:25:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_tfrozen_src18.csv
[Mon May  6 20:25:44 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Mon May  6 20:25:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_tfrozen_src18.csv
[Mon May  6 20:25:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 20:26:00 2013] Warning, spatial fit 18 centroid is now closest to src. 13
[Mon May  6 20:26:00 2013] Vigneting correction estimate = 1.000000
[Mon May  6 20:26:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 20:26:00 2013] Assessing source extent using major
[Mon May  6 20:26:00 2013] Source does appear to be extended
[Mon May  6 20:26:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  7 00:17:31 2013] XMMSAS src. selection expression = ellipse(27608.995941, 28046.003143, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May  7 00:17:31 2013] Writing source region out to fullrun_mos2_xmm0550670601_pi300-10000_pass1_cl_src24_src.reg
[Tue May  7 00:17:31 2013] Extracting stamp from image fullrun_mos2_xmm0550670601_pi300-10000_cl_sm2.00.img.gz, (280, 285) - (355, 360)
[Tue May  7 00:17:32 2013] XMMSAS bgd. selection expression = annulus(27608.995941, 28046.003143, 1087.500000, 2175.000000, X, Y) && !ellipse(27296.005157, 27439.589142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27944.046000, 24816.311000, 2057.096059, 994.304029, 316.905700, X, Y) && !ellipse(25211.380200, 25134.146400, 948.584027, 948.584027, 0.000000, X, Y) && !ellipse(28818.316400, 25598.424000, 1213.808035, 783.079223, 142.395400, X, Y) && !ellipse(24575.711200, 25859.834600, 1786.824051, 605.121617, 36.214000, X, Y) && !ellipse(24918.899498, 26581.620400, 1100.032032, 678.696020, 99.729130, X, Y) && !ellipse(28469.906000, 25387.972000, 1996.888057, 1081.904031, 147.694000, X, Y) && !ellipse(26420.125200, 26106.876000, 998.168029, 998.168029, 0.000000, X, Y) && !ellipse(28647.131880, 28100.934000, 1260.248036, 527.414415, 332.766800, X, Y) && !ellipse(25048.120600, 26956.306000, 1778.728051, 846.400024, 113.544800, X, Y) && !ellipse(27260.567800, 30040.503400, 2004.672058, 728.997621, 347.497000, X, Y) && !ellipse(27020.259125, 26401.281525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27542.755615, 29886.320770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28831.347534, 27535.095856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26219.173065, 25536.429626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29856.214600, 30275.620800, 1423.376041, 596.778417, 84.905200, X, Y) && !ellipse(27833.444153, 30286.407135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29752.452000, 27728.114000, 1344.768039, 1344.768039, 0.000000, X, Y) && !ellipse(24160.949800, 29485.568000, 2046.984059, 868.920025, 104.072700, X, Y) && !ellipse(28284.931885, 29181.572449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29384.799011, 29964.922913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24349.707000, 30249.496000, 1303.104037, 772.694422, 112.654100, X, Y) && !ellipse(26892.602661, 27537.283600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26257.102000, 27907.608000, 1154.800033, 963.816028, 105.848300, X, Y)
[Tue May  7 00:17:32 2013] Writing fullrun_mos2_xmm0550670601_pi300-10000_pass1_cl_src24.gif
[Tue May  7 00:35:17 2013] Mean detx,y = (-177.61, 568.63) 
[Tue May  7 00:35:18 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May  7 00:35:24 2013] Binned source spectrum to 10 counts/bin
[Tue May  7 00:35:24 2013] Setting source spectrum file to fullrun_mos2_xmm0550670601_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Tue May  7 00:35:24 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0550670601_pi300-10000_pass1_cl_src24_bgd.pi.gz