[Mon May  6 09:37:16 2013] Detection parameters:
  Position = (329.0, 309.1) = 18 52 34.16 0 39 50.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 639.5 +/- 35.3
  Background counts = 89.5
  Rate = 0.02 +/- 0.001

[Mon May  6 09:37:17 2013] Off-axis axis estimate = 2.35'
[Mon May  6 12:45:51 2013] Using EEF radius (= 7.60 ")to estimate initial spatial extent for simple fitting
[Mon May  6 12:45:51 2013] Initial guess for spatial extent in simple fitting = 7.60"
[Mon May  6 12:45:51 2013] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.792
[Mon May  6 12:45:51 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 7.60"
[Mon May  6 15:17:50 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_src10.ximg exists
[Mon May  6 15:17:50 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_src10_1.ximg exists
[Mon May  6 15:17:50 2013] Fit fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_src10 appears to have run properly
[Mon May  6 15:17:51 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Mon May  6 15:17:51 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Mon May  6 15:17:51 2013] Fit fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Mon May  6 15:18:10 2013] Spatial fit model total counts = 3353.530000, observed total counts = 3229.000000
[Mon May  6 15:18:10 2013] Offset between fit and detection position for source 2 = 0.778454 pixels
[Mon May  6 15:18:10 2013] 3339.761000 total counts/ 2951.610000 bgd. counts: snr = 7.144490
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.778454 pixels
  Position = (328.2, 309.1) = 18 52 34.39 0 39 50.7
  Extent = 15.2 (15.1-30.4)" x 4.9 (4.0-6.3)", rotation angle = 11 (5-18) degrees
  Source counts = 388.2 +/- 57.8
  Background counts = 2951.6
  Rate = 0.01 +/- 0.002
[Mon May  6 15:18:10 2013] Vigneting correction estimate = 1.000000
[Mon May  6 15:18:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 15:18:10 2013] Assessing source extent using major axis lower bound
[Mon May  6 15:18:10 2013] Source does appear to be extended
[Mon May  6 15:18:10 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.41
[Mon May  6 15:18:10 2013] Source is asymmetric
[Mon May  6 15:18:10 2013] Source is confused with source 25
[Mon May  6 18:27:38 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May  6 18:27:38 2013] Initial guess for spatial extent in simple fitting = 10.06"
[Mon May  6 18:27:38 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.138
[Mon May  6 18:27:38 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 10.06"
[Mon May  6 20:25:43 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_src10.ximg exists
[Mon May  6 20:25:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_src10.csv
[Mon May  6 20:25:43 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_src10_1.ximg exists
[Mon May  6 20:25:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_src10.csv
[Mon May  6 20:25:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 20:25:44 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Mon May  6 20:25:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_tfrozen_src10.csv
[Mon May  6 20:25:44 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Mon May  6 20:25:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_tfrozen_src10.csv
[Mon May  6 20:25:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 20:26:00 2013] Warning, spatial fit 10 centroid is now closest to src. 6
[Mon May  6 20:26:00 2013] Spatial fit model total counts = 3152.190000, observed total counts = 3150.000000
[Mon May  6 20:26:00 2013] Offset between fit and detection position for source 2 = 2.484931 pixels
[Mon May  6 20:26:00 2013] Warning, changing simple spatial fit ID from 10 to 22
[Mon May  6 20:26:00 2013] 2997.668900 total counts/ 2919.140000 bgd. counts: snr = 1.453457
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.484931 pixels
  Position = (326.4, 310.8) = 18 52 34.92 0 39 58.0
  Extent = 9.9 (4.7-15.6)" x 5.6 (2.8-10.2)", rotation angle = 0 (359-0) degrees
  Source counts = 78.5 +/- 54.8
  Background counts = 2919.1
  Rate = 0.002 +/- 0.002
  Deleting source due to low Poisson probability