[Mon May  6 09:37:16 2013] Detection parameters:
  Position = (329.9, 323.0) = 18 52 33.89 0 40 50.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 453.8 +/- 31.4
  Background counts = 94.0
  Rate = 0.01 +/- 0.0009

[Mon May  6 09:37:17 2013] Off-axis axis estimate = 2.90'
[Mon May  6 12:45:51 2013] Using EEF radius (= 7.88 ")to estimate initial spatial extent for simple fitting
[Mon May  6 12:45:51 2013] Initial guess for spatial extent in simple fitting = 7.88"
[Mon May  6 12:45:51 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.749
[Mon May  6 12:45:51 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 7.88"
[Mon May  6 15:17:50 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_src13.ximg exists
[Mon May  6 15:17:50 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_src13_1.ximg exists
[Mon May  6 15:17:50 2013] Fit fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_src13 appears to have run properly
[Mon May  6 15:17:51 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Mon May  6 15:17:51 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Mon May  6 15:17:51 2013] Fit fullrun_mos2_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Mon May  6 15:18:10 2013] Spatial fit model total counts = 2785.790000, observed total counts = 2569.000000
[Mon May  6 15:18:10 2013] Offset between fit and detection position for source 17 = 0.562384 pixels
[Mon May  6 15:18:10 2013] 2747.200000 total counts/ 2488.080000 bgd. counts: snr = 5.194799
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.562384 pixels
  Position = (329.8, 323.6) = 18 52 33.92 0 40 53.5
  Extent = 15.8 (10.9-31.5)" x 6.6 (4.7-10.7)", rotation angle = 333 (315-350) degrees
  Source counts = 259.1 +/- 52.4
  Background counts = 2488.1
  Rate = 0.007 +/- 0.001
[Mon May  6 15:18:10 2013] Vigneting correction estimate = 1.000000
[Mon May  6 15:18:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 15:18:10 2013] Assessing source extent using major axis lower bound
[Mon May  6 15:18:10 2013] Source does appear to be extended
[Mon May  6 15:18:10 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.02
[Mon May  6 15:18:10 2013] Source is confused with source 25
[Mon May  6 18:27:38 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May  6 18:27:38 2013] Initial guess for spatial extent in simple fitting = 11.17"
[Mon May  6 18:27:38 2013] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.115
[Mon May  6 18:27:38 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 11.17"
[Mon May  6 20:25:44 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_src13.ximg exists
[Mon May  6 20:25:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_src13.csv
[Mon May  6 20:25:44 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_src13_1.ximg exists
[Mon May  6 20:25:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_src13.csv
[Mon May  6 20:25:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 20:25:44 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Mon May  6 20:25:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_tfrozen_src13.csv
[Mon May  6 20:25:44 2013] fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Mon May  6 20:25:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_tfrozen_src13.csv
[Mon May  6 20:25:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670601_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 20:26:00 2013] Warning, spatial fit 13 centroid is now closest to src. 42
[Mon May  6 20:26:00 2013] Vigneting correction estimate = 1.000000
[Mon May  6 20:26:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 20:26:00 2013] Assessing source extent using major axis lower bound
[Mon May  6 20:26:00 2013] Source does appear to be extended
[Mon May  6 20:26:00 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.02
[Tue May  7 00:17:31 2013] XMMSAS src. selection expression = ellipse(28647.131880, 28100.934000, 945.186027, 395.560811, 332.766800, X, Y)
[Tue May  7 00:17:31 2013] Writing source region out to fullrun_mos2_xmm0550670601_pi300-10000_pass1_cl_src17_src.reg
[Tue May  7 00:17:31 2013] Extracting stamp from image fullrun_mos2_xmm0550670601_pi300-10000_cl_sm2.00.img.gz, (276, 269) - (384, 378)
[Tue May  7 00:17:31 2013] XMMSAS bgd. selection expression = annulus(28647.131880, 28100.934000, 1575.310045, 3150.620091, X, Y) && !ellipse(27296.005157, 27439.589142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27944.046000, 24816.311000, 2057.096059, 994.304029, 316.905700, X, Y) && !ellipse(27134.329803, 24412.024719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25211.380200, 25134.146400, 948.584027, 948.584027, 0.000000, X, Y) && !ellipse(28818.316400, 25598.424000, 1213.808035, 783.079223, 142.395400, X, Y) && !ellipse(24575.711200, 25859.834600, 1786.824051, 605.121617, 36.214000, X, Y) && !ellipse(26186.437400, 24147.897600, 1148.384033, 1148.384033, 0.000000, X, Y) && !ellipse(24918.899498, 26581.620400, 1100.032032, 678.696020, 99.729130, X, Y) && !ellipse(28469.906000, 25387.972000, 1996.888057, 1081.904031, 147.694000, X, Y) && !ellipse(26420.125200, 26106.876000, 998.168029, 998.168029, 0.000000, X, Y) && !ellipse(25048.120600, 26956.306000, 1778.728051, 846.400024, 113.544800, X, Y) && !ellipse(27260.567800, 30040.503400, 2004.672058, 728.997621, 347.497000, X, Y) && !ellipse(27608.995941, 28046.003143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27020.259125, 26401.281525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27542.755615, 29886.320770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28831.347534, 27535.095856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26219.173065, 25536.429626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29856.214600, 30275.620800, 1423.376041, 596.778417, 84.905200, X, Y) && !ellipse(27833.444153, 30286.407135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29752.452000, 27728.114000, 1344.768039, 1344.768039, 0.000000, X, Y) && !ellipse(24160.949800, 29485.568000, 2046.984059, 868.920025, 104.072700, X, Y) && !ellipse(28284.931885, 29181.572449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24944.058075, 24408.453705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29384.799011, 29964.922913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24434.656000, 23911.448000, 1148.104033, 1148.104033, 0.000000, X, Y) && !ellipse(31440.904144, 28766.105499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24349.707000, 30249.496000, 1303.104037, 772.694422, 112.654100, X, Y) && !ellipse(26892.602661, 27537.283600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26257.102000, 27907.608000, 1154.800033, 963.816028, 105.848300, X, Y)
[Tue May  7 00:17:31 2013] Writing fullrun_mos2_xmm0550670601_pi300-10000_pass1_cl_src17.gif
[Tue May  7 00:34:04 2013] Mean detx,y = (-1263.49, 866.42) 
[Tue May  7 00:34:05 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May  7 00:34:11 2013] Binned source spectrum to 10 counts/bin
[Tue May  7 00:34:11 2013] Setting source spectrum file to fullrun_mos2_xmm0550670601_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue May  7 00:34:11 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0550670601_pi300-10000_pass1_cl_src17_bgd.pi.gz