[Mon May  6 09:36:44 2013] Detection parameters:
  Position = (290.9, 274.2) = 18 52 45.23 0 37 18.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.9 +/- 16.7
  Background counts = 58.0
  Rate = 0.003 +/- 0.0005

[Mon May  6 09:36:44 2013] Off-axis axis estimate = 1.84'
[Mon May  6 10:16:49 2013] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Mon May  6 10:16:49 2013] Initial guess for spatial extent in simple fitting = 7.35"
[Mon May  6 10:16:49 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.834
[Mon May  6 10:16:49 2013] Giving source the simple spatial ID 50 for pass 0, mean size = 7.35"
[Mon May  6 12:45:49 2013] fullrun_mos1_xmm0550670601_pi300-10000_cl_pass0_src50.ximg exists
[Mon May  6 12:45:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670601_pi300-10000_cl_pass0_src50.csv
[Mon May  6 12:45:49 2013] fullrun_mos1_xmm0550670601_pi300-10000_cl_pass0_src50_1.ximg exists
[Mon May  6 12:45:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670601_pi300-10000_cl_pass0_src50.csv
[Mon May  6 12:45:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550670601_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550670601_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 12:45:51 2013] fullrun_mos1_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Mon May  6 12:45:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src50.csv
[Mon May  6 12:45:51 2013] fullrun_mos1_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Mon May  6 12:45:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src50.csv
[Mon May  6 12:45:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 15:18:03 2013] Warning, spatial fit 50 centroid is now closest to src. 51
[Mon May  6 15:18:03 2013] Vigneting correction estimate = 1.000000
[Mon May  6 15:18:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 15:18:03 2013] Assessing source extent using major
[Mon May  6 15:18:03 2013] Source does appear to be extended
[Mon May  6 15:18:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  6 15:50:21 2013] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Mon May  6 15:50:21 2013] Initial guess for spatial extent in simple fitting = 7.35"
[Mon May  6 15:50:21 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.834
[Mon May  6 15:50:21 2013] Giving source the simple spatial ID 49 for pass 1, mean size = 7.35"
[Mon May  6 18:27:37 2013] fullrun_mos1_xmm0550670601_pi300-10000_cl_pass1_src49.ximg exists
[Mon May  6 18:27:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670601_pi300-10000_cl_pass1_src49.csv
[Mon May  6 18:27:37 2013] fullrun_mos1_xmm0550670601_pi300-10000_cl_pass1_src49_1.ximg exists
[Mon May  6 18:27:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670601_pi300-10000_cl_pass1_src49.csv
[Mon May  6 18:27:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550670601_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550670601_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 18:27:38 2013] fullrun_mos1_xmm0550670601_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Mon May  6 18:27:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670601_pi300-10000_cl_pass1_tfrozen_src49.csv
[Mon May  6 18:27:38 2013] fullrun_mos1_xmm0550670601_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Mon May  6 18:27:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550670601_pi300-10000_cl_pass1_tfrozen_src49.csv
[Mon May  6 18:27:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550670601_pi300-10000_cl_pass1_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550670601_pi300-10000_cl_pass1_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 20:25:54 2013] Warning, spatial fit 49 centroid is now closest to src. 51
[Mon May  6 20:25:54 2013] Vigneting correction estimate = 1.000000
[Mon May  6 20:25:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 20:25:54 2013] Assessing source extent using major
[Mon May  6 20:25:54 2013] Source does appear to be extended
[Mon May  6 20:25:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  6 20:25:54 2013] Source is confused with source 12
[Mon May  6 21:33:39 2013] XMMSAS src. selection expression = ellipse(25255.925781, 23805.735504, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May  6 21:33:39 2013] Writing source region out to fullrun_mos1_xmm0550670601_pi300-10000_pass1_cl_src46_src.reg
[Mon May  6 21:33:39 2013] Extracting stamp from image fullrun_mos1_xmm0550670601_pi300-10000_cl_sm2.00.img.gz, (253, 237) - (328, 312)
[Mon May  6 21:33:39 2013] XMMSAS bgd. selection expression = annulus(25255.925781, 23805.735504, 1087.500000, 2175.000000, X, Y) && !ellipse(27184.056000, 24426.675600, 1978.200057, 1045.320030, 150.425000, X, Y) && !ellipse(25231.817400, 25145.144000, 1096.368032, 877.152025, 76.599700, X, Y) && !ellipse(24502.453400, 25869.045600, 1453.168042, 781.475222, 32.381200, X, Y) && !ellipse(26713.666000, 24252.157200, 1145.552033, 832.648024, 337.903800, X, Y) && !ellipse(28280.994000, 26843.236000, 1185.672034, 1185.672034, 0.000000, X, Y) && !ellipse(26088.260000, 24245.252000, 1113.288032, 1113.288032, 0.000000, X, Y) && !ellipse(24995.324620, 26423.857200, 755.909622, 755.909622, 0.000000, X, Y) && !ellipse(26407.942000, 26280.760000, 1107.480032, 711.170420, 354.269530, X, Y) && !ellipse(26737.562225, 26767.078186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25327.642200, 25077.961400, 1973.520057, 1228.920035, 55.004700, X, Y) && !ellipse(27884.148000, 27174.580000, 1880.512054, 485.256814, 123.091000, X, Y) && !ellipse(28668.086000, 25590.644000, 2239.024064, 1410.320041, 118.097400, X, Y) && !ellipse(28504.684000, 26840.875800, 1834.920053, 605.895217, 11.997800, X, Y) && !ellipse(24248.768000, 26177.146000, 1164.728034, 1164.728034, 0.000000, X, Y) && !ellipse(22464.671620, 26273.936200, 1258.200036, 464.756013, 96.942230, X, Y) && !ellipse(24613.244080, 23957.635040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27496.106750, 26262.184540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24021.053070, 24760.353943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22486.389020, 25101.188600, 1265.088036, 883.272025, 83.793390, X, Y) && !ellipse(23501.290000, 24292.606000, 1176.496034, 1176.496034, 0.000000, X, Y)
[Mon May  6 21:33:39 2013] Writing fullrun_mos1_xmm0550670601_pi300-10000_pass1_cl_src46.gif
[Mon May  6 22:04:51 2013] Mean detx,y = (-3509.60, -1709.52) 
[Mon May  6 22:04:51 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May  6 22:05:00 2013] Binned source spectrum to 10 counts/bin
[Mon May  6 22:05:00 2013] Setting source spectrum file to fullrun_mos1_xmm0550670601_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Mon May  6 22:05:00 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0550670601_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Tue May  7 00:14:09 2013] Not generating rmf since there are only 84 counts
[Tue May  7 00:14:09 2013] rmf not generated due to insufficient counts