[Mon May 6 09:36:43 2013] Detection parameters: Position = (298.7, 280.0) = 18 52 42.95 0 37 45.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 543.7 +/- 33.7 Background counts = 67.3 Rate = 0.02 +/- 0.001 [Mon May 6 09:36:44 2013] Off-axis axis estimate = 1.33' [Mon May 6 10:16:49 2013] Using EEF radius (= 7.10 ")to estimate initial spatial extent for simple fitting [Mon May 6 10:16:49 2013] Initial guess for spatial extent in simple fitting = 7.10" [Mon May 6 10:16:49 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.881 [Mon May 6 10:16:49 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 7.10" [Mon May 6 12:45:48 2013] fullrun_mos1_xmm0550670601_pi300-10000_cl_pass0_src8.ximg exists [Mon May 6 12:45:48 2013] fullrun_mos1_xmm0550670601_pi300-10000_cl_pass0_src8_1.ximg exists [Mon May 6 12:45:48 2013] Fit fullrun_mos1_xmm0550670601_pi300-10000_cl_pass0_src8 appears to have run properly [Mon May 6 12:45:50 2013] fullrun_mos1_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src8.ximg exists [Mon May 6 12:45:50 2013] fullrun_mos1_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists [Mon May 6 12:45:50 2013] Fit fullrun_mos1_xmm0550670601_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly [Mon May 6 15:18:03 2013] Spatial fit model total counts = 3375.570000, observed total counts = 3371.000000 [Mon May 6 15:18:03 2013] Offset between fit and detection position for source 13 = 3.149770 pixels [Mon May 6 15:18:03 2013] 3373.263000 total counts/ 2650.500000 bgd. counts: snr = 14.038865 Spatial fit parameters: Offset between fit and detection position for source 13 = 3.149770 pixels Position = (301.1, 278.0) = 18 52 42.25 0 37 35.4 Extent = 14.2 (14.2-28.4)", rotation angle = 0 Source counts = 722.8 +/- 58.1 Background counts = 2650.5 Rate = 0.02 +/- 0.002 [Mon May 6 15:18:03 2013] Spatial fit model total counts = 3794.410000, observed total counts = 3794.000000 [Mon May 6 15:18:03 2013] Offset between fit and detection position for source 13 = 1.399684 pixels [Mon May 6 15:18:03 2013] Warning, changing simple spatial fit ID from 8 to 12 [Mon May 6 15:18:03 2013] 3871.884000 total counts/ 3032.730000 bgd. counts: snr = 15.237889 Spatial fit parameters: Offset between fit and detection position for source 13 = 1.399684 pixels Position = (300.4, 279.2) = 18 52 42.46 0 37 40.6 Extent = 13.9 (13.9-27.8)", rotation angle = 0 Source counts = 839.2 +/- 62.2 Background counts = 3032.7 Rate = 0.02 +/- 0.002 [Mon May 6 15:18:03 2013] Vigneting correction estimate = 1.000000 [Mon May 6 15:18:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 15:18:03 2013] Assessing source extent using major axis lower bound [Mon May 6 15:18:03 2013] Source does appear to be extended [Mon May 6 15:18:03 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 6 15:18:03 2013] Source is confused with source 3 [Mon May 6 15:18:03 2013] Source is confused with source 12 [Mon May 6 15:50:21 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Mon May 6 15:50:21 2013] Initial guess for spatial extent in simple fitting = 13.92" [Mon May 6 15:50:21 2013] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.895 [Mon May 6 15:50:21 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 13.92" [Mon May 6 18:27:36 2013] fullrun_mos1_xmm0550670601_pi300-10000_cl_pass1_src8.ximg exists [Mon May 6 18:27:36 2013] fullrun_mos1_xmm0550670601_pi300-10000_cl_pass1_src8_1.ximg exists [Mon May 6 18:27:36 2013] Fit fullrun_mos1_xmm0550670601_pi300-10000_cl_pass1_src8 appears to have run properly [Mon May 6 18:27:37 2013] fullrun_mos1_xmm0550670601_pi300-10000_cl_pass1_tfrozen_src8.ximg exists [Mon May 6 18:27:37 2013] fullrun_mos1_xmm0550670601_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists [Mon May 6 18:27:37 2013] Fit fullrun_mos1_xmm0550670601_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly [Mon May 6 20:25:54 2013] Warning, spatial fit 8 centroid is now closest to src. 48 [Mon May 6 20:25:54 2013] Spatial fit model total counts = 3791.740000, observed total counts = 3794.000000 [Mon May 6 20:25:54 2013] Offset between fit and detection position for source 13 = 0.029765 pixels [Mon May 6 20:25:54 2013] Warning, changing simple spatial fit ID from 8 to 12 [Mon May 6 20:25:54 2013] 3869.120000 total counts/ 3024.800000 bgd. counts: snr = 15.351780 Spatial fit parameters: Offset between fit and detection position for source 13 = 0.029765 pixels Position = (300.4, 279.2) = 18 52 42.45 0 37 40.7 Extent = 13.9 (13.9-27.8)", rotation angle = 0 Source counts = 844.3 +/- 62.2 Background counts = 3024.8 Rate = 0.02 +/- 0.002 [Mon May 6 20:25:54 2013] Vigneting correction estimate = 1.000000 [Mon May 6 20:25:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 20:25:54 2013] Assessing source extent using major axis lower bound [Mon May 6 20:25:54 2013] Source does appear to be extended [Mon May 6 20:25:54 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 6 21:33:37 2013] XMMSAS src. selection expression = ellipse(26088.260000, 24245.252000, 834.966024, 834.966024, 0.000000, X, Y) [Mon May 6 21:33:37 2013] Writing source region out to fullrun_mos1_xmm0550670601_pi300-10000_pass1_cl_src13_src.reg [Mon May 6 21:33:37 2013] Extracting stamp from image fullrun_mos1_xmm0550670601_pi300-10000_cl_sm2.00.img.gz, (252, 231) - (348, 327) [Mon May 6 21:33:37 2013] XMMSAS bgd. selection expression = annulus(26088.260000, 24245.252000, 1391.610040, 2783.220080, X, Y) && !ellipse(27184.056000, 24426.675600, 1978.200057, 1045.320030, 150.425000, X, Y) && !ellipse(28862.662000, 25593.550200, 1250.480036, 722.216021, 142.030500, X, Y) && !ellipse(25231.817400, 25145.144000, 1096.368032, 877.152025, 76.599700, X, Y) && !ellipse(24502.453400, 25869.045600, 1453.168042, 781.475222, 32.381200, X, Y) && !ellipse(26713.666000, 24252.157200, 1145.552033, 832.648024, 337.903800, X, Y) && !ellipse(28280.994000, 26843.236000, 1185.672034, 1185.672034, 0.000000, X, Y) && !ellipse(24995.324620, 26423.857200, 755.909622, 755.909622, 0.000000, X, Y) && !ellipse(26407.942000, 26280.760000, 1107.480032, 711.170420, 354.269530, X, Y) && !ellipse(26737.562225, 26767.078186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25327.642200, 25077.961400, 1973.520057, 1228.920035, 55.004700, X, Y) && !ellipse(27884.148000, 27174.580000, 1880.512054, 485.256814, 123.091000, X, Y) && !ellipse(28668.086000, 25590.644000, 2239.024064, 1410.320041, 118.097400, X, Y) && !ellipse(28815.020600, 28093.330400, 1261.248036, 717.467221, 309.215300, X, Y) && !ellipse(25056.211600, 27302.117800, 1100.256032, 784.742423, 238.406000, X, Y) && !ellipse(28504.684000, 26840.875800, 1834.920053, 605.895217, 11.997800, X, Y) && !ellipse(24248.768000, 26177.146000, 1164.728034, 1164.728034, 0.000000, X, Y) && !ellipse(29079.127000, 26720.470600, 1239.216036, 595.700817, 8.755920, X, Y) && !ellipse(26153.126556, 26863.182281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24220.300000, 28051.349010, 1692.800049, 763.232022, 89.965596, X, Y) && !ellipse(22464.671620, 26273.936200, 1258.200036, 464.756013, 96.942230, X, Y) && !ellipse(24613.244080, 23957.635040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27496.106750, 26262.184540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22487.723800, 27579.214000, 1088.640031, 450.736013, 68.374300, X, Y) && !ellipse(24021.053070, 24760.353943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22486.389020, 25101.188600, 1265.088036, 883.272025, 83.793390, X, Y) && !ellipse(23501.290000, 24292.606000, 1176.496034, 1176.496034, 0.000000, X, Y) && !ellipse(22443.649719, 27777.598267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25255.925781, 23805.735504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29806.526000, 24374.954000, 1264.712036, 1264.712036, 0.000000, X, Y) [Mon May 6 21:33:37 2013] Writing fullrun_mos1_xmm0550670601_pi300-10000_pass1_cl_src13.gif [Mon May 6 21:42:52 2013] Mean detx,y = (-2968.42, -954.40) [Mon May 6 21:42:53 2013] Setting backscal keywords in source and bgd. spectrum [Mon May 6 21:43:00 2013] Binned source spectrum to 10 counts/bin [Mon May 6 21:43:00 2013] Setting source spectrum file to fullrun_mos1_xmm0550670601_pi300-10000_pass1_cl_src13_src_b10.pi.gz [Mon May 6 21:43:00 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0550670601_pi300-10000_pass1_cl_src13_bgd.pi.gz