[Tue May 21 00:40:19 2013] Detection parameters:
  Position = (289.4, 312.9) = 18 52 45.28 0 39 57.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 353.2 +/- 32.4
  Background counts = 313.5
  Rate = 0.02 +/- 0.002

[Tue May 21 00:40:20 2013] Off-axis axis estimate = 1.24'
[Tue May 21 00:41:17 2013] Using EEF radius (= 7.05 ")to estimate initial spatial extent for simple fitting
[Tue May 21 00:41:17 2013] Initial guess for spatial extent in simple fitting = 7.05"
[Tue May 21 00:41:17 2013] source mask rpix=1.6, npix_max = 17, mask sum = 12, frac = 0.668
[Tue May 21 00:41:17 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.05"
[Tue May 21 00:41:18 2013] fullrun_pn_xmm0550670501_pi300-10000_cl_pass0_src2.ximg exists
[Tue May 21 00:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550670501_pi300-10000_cl_pass0_src2.csv
[Tue May 21 00:41:18 2013] fullrun_pn_xmm0550670501_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue May 21 00:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550670501_pi300-10000_cl_pass0_src2.csv
[Tue May 21 00:41:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550670501_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550670501_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:41:18 2013] fullrun_pn_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue May 21 00:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue May 21 00:41:18 2013] fullrun_pn_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue May 21 00:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue May 21 00:41:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:41:35 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.203611 pixels away
[Tue May 21 00:41:35 2013] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 15.170311 pixels away
[Tue May 21 00:41:35 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:41:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:41:35 2013] Assessing source extent using major
[Tue May 21 00:41:35 2013] Source does appear to be extended
[Tue May 21 00:41:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 00:42:34 2013] Using EEF radius (= 7.05 ")to estimate initial spatial extent for simple fitting
[Tue May 21 00:42:34 2013] Initial guess for spatial extent in simple fitting = 7.05"
[Tue May 21 00:42:34 2013] source mask rpix=1.6, npix_max = 17, mask sum = 12, frac = 0.668
[Tue May 21 00:42:34 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 7.05"
[Tue May 21 00:42:35 2013] fullrun_pn_xmm0550670501_pi300-10000_cl_pass1_src2.ximg exists
[Tue May 21 00:42:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550670501_pi300-10000_cl_pass1_src2.csv
[Tue May 21 00:42:35 2013] fullrun_pn_xmm0550670501_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue May 21 00:42:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550670501_pi300-10000_cl_pass1_src2.csv
[Tue May 21 00:42:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550670501_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550670501_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:42:35 2013] fullrun_pn_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue May 21 00:42:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src2.csv
[Tue May 21 00:42:35 2013] fullrun_pn_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue May 21 00:42:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src2.csv
[Tue May 21 00:42:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:42:50 2013] Spatial fit model total counts = 5511.050000, observed total counts = 2811.000000
[Tue May 21 00:42:50 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 21 00:42:50 2013] Source 2 is offset by 2.264257 and 8.750814 pixels which is larger than
2 X fitted extent = 6.373334 x 6.373334, not incorporating fit results
[Tue May 21 00:42:50 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:42:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:42:50 2013] Assessing source extent using major
[Tue May 21 00:42:50 2013] Source does appear to be extended
[Tue May 21 00:42:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 00:42:50 2013] Source is confused with source 9
[Tue May 21 00:43:43 2013] XMMSAS src. selection expression = ellipse(25125.606323, 27170.456787, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 21 00:43:43 2013] Not overwriting source region fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src2_src.reg
[Tue May 21 00:43:43 2013] Extracting stamp from image fullrun_pn_xmm0550670501_pi300-10000_cl_sm2.00.img.gz, (252, 275) - (327, 350)
[Tue May 21 00:43:43 2013] XMMSAS bgd. selection expression = annulus(25125.606323, 27170.456787, 1087.500000, 2175.000000, X, Y) && !ellipse(27744.962646, 27279.854614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28153.264000, 27004.320000, 1180.720034, 1180.720034, 0.000000, X, Y) && !ellipse(25990.960000, 24318.414000, 1108.960032, 1108.960032, 0.000000, X, Y) && !ellipse(26507.036652, 26646.510651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26162.884000, 26381.714000, 1091.264031, 764.427222, 143.842000, X, Y) && !ellipse(28898.766000, 25988.396000, 2361.440068, 2361.440068, 0.000000, X, Y) && !ellipse(25514.636000, 25892.950000, 2182.528063, 2182.528063, 0.000000, X, Y) && !ellipse(25614.155609, 24747.904510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27009.448000, 24609.552000, 1151.944033, 1151.944033, 0.000000, X, Y) && !ellipse(27131.708000, 27613.102000, 361.633610, 361.633610, 0.000000, X, Y)
[Tue May 21 00:43:43 2013] Writing fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src2.gif
[Tue May 21 00:43:45 2013] ../../xmm0550670501/products/events/fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0550670501/products/events/fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Tue May 21 00:43:47 2013] Mean detx,y = (-1748.47, 292.23) 
[Tue May 21 00:43:47 2013] ../../xmm0550670501/products/images/fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src2_src.img and ../../xmm0550670501/products/images/fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Tue May 21 00:43:47 2013] ../../xmm0550670501/products/spectra/fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0550670501/products/spectra/fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Tue May 21 00:43:47 2013] Setting source spectrum file to fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue May 21 00:43:47 2013] Setting bgd. spectrum file to fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue May 21 00:43:47 2013] ../../xmm0550670501/products/lightcurves/fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0550670501/products/lightcurves/fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Tue May 21 00:44:15 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 21 00:44:15 2013] rmf not generated due to insufficient counts
[Tue May 21 00:44:15 2013] fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src2.arf exists, delete to re-create
[Wed May 22 13:51:53 2013] Updating aperture counts using extracted products
[Wed May 22 13:51:53 2013] Total counts from fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 2368.00
[Wed May 22 13:51:53 2013] Total counts from fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src2_bgd.pi.gz = 1285.00
[Wed May 22 13:51:53 2013] Got source and background scale factors 864934.000000, 729075.000000
[Wed May 22 13:51:53 2013] User source parameters:
  Position = (289.4, 312.9) = 18 52 45.28 0 39 57.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 843.5 +/- 49.7
  Background aperture counts = 1524.5
  Rate = 0.03 +/- 0.001

[Wed May 22 13:51:53 2013] Updating counts from extracted products
[Wed May 22 13:51:53 2013] Set source signif. to 843.55/39.04 = 21.60
[Wed May 22 13:51:56 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 13:51:56 2013] Using photon index=1.80, rate=0.0251, arf fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src2.arf
[Wed May 22 13:51:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 13:51:56 2013] Updating source flux to 2.6e-13
[Wed May 22 13:53:35 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 13:53:47 2013] xmm0550670501/analysis//spectral/fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete