[Tue May 21 00:40:20 2013] Detection parameters: Position = (340.0, 313.8) = 18 52 30.61 0 40 4.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 260.2 +/- 34.6 Background counts = 391.1 Rate = 0.01 +/- 0.002 [Tue May 21 00:40:20 2013] Off-axis axis estimate = 3.21' [Tue May 21 00:41:17 2013] Using EEF radius (= 8.03 ")to estimate initial spatial extent for simple fitting [Tue May 21 00:41:17 2013] Initial guess for spatial extent in simple fitting = 8.03" [Tue May 21 00:41:17 2013] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.908 [Tue May 21 00:41:17 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 8.03" [Tue May 21 00:41:18 2013] fullrun_pn_xmm0550670501_pi300-10000_cl_pass0_src13.ximg exists [Tue May 21 00:41:18 2013] fullrun_pn_xmm0550670501_pi300-10000_cl_pass0_src13_1.ximg exists [Tue May 21 00:41:18 2013] Fit fullrun_pn_xmm0550670501_pi300-10000_cl_pass0_src13 appears to have run properly [Tue May 21 00:41:19 2013] fullrun_pn_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src13.ximg exists [Tue May 21 00:41:19 2013] fullrun_pn_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists [Tue May 21 00:41:19 2013] Fit fullrun_pn_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly [Tue May 21 00:41:35 2013] Spatial fit model total counts = 5110.200000, observed total counts = 4935.000000 [Tue May 21 00:41:35 2013] Offset between fit and detection position for source 13 = 4.613791 pixels [Tue May 21 00:41:35 2013] 5065.800000 total counts/ 3855.330000 bgd. counts: snr = 19.495001 Spatial fit parameters: Offset between fit and detection position for source 13 = 4.613791 pixels Position = (337.1, 310.2) = 18 52 31.44 0 39 44.5 Extent = 16.1 (16.0-32.1)", rotation angle = 0 Source counts = 1210.5 +/- 71.2 Background counts = 3855.3 Rate = 0.04 +/- 0.002 [Tue May 21 00:41:35 2013] Vigneting correction estimate = 1.000000 [Tue May 21 00:41:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 21 00:41:35 2013] Assessing source extent using major axis lower bound [Tue May 21 00:41:35 2013] Source does appear to be extended [Tue May 21 00:41:35 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 21 00:41:35 2013] Source is confused with source 5 [Tue May 21 00:42:34 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Tue May 21 00:42:34 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Tue May 21 00:42:34 2013] Initial guess for spatial extent in simple fitting = 16.07" [Tue May 21 00:42:34 2013] source mask rpix=3.7, npix_max = 70, mask sum = 64, frac = 0.910 [Tue May 21 00:42:34 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 16.07" [Tue May 21 00:42:35 2013] fullrun_pn_xmm0550670501_pi300-10000_cl_pass1_src13.ximg exists [Tue May 21 00:42:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550670501_pi300-10000_cl_pass1_src13.csv [Tue May 21 00:42:35 2013] fullrun_pn_xmm0550670501_pi300-10000_cl_pass1_src13_1.ximg exists [Tue May 21 00:42:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550670501_pi300-10000_cl_pass1_src13.csv [Tue May 21 00:42:35 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0550670501_pi300-10000_cl_pass1_src13_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0550670501_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 21 00:42:36 2013] fullrun_pn_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src13.ximg exists [Tue May 21 00:42:36 2013] fullrun_pn_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists [Tue May 21 00:42:36 2013] Fit fullrun_pn_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly [Tue May 21 00:42:50 2013] Spatial fit model total counts = 6875.700000, observed total counts = 6875.000000 [Tue May 21 00:42:50 2013] Offset between fit and detection position for source 13 = 4.286689 pixels [Tue May 21 00:42:50 2013] Warning, changing simple spatial fit ID from 13 to 5 [Tue May 21 00:42:50 2013] 5255.130000 total counts/ 4218.890000 bgd. counts: snr = 15.953694 Spatial fit parameters: Offset between fit and detection position for source 13 = 4.286689 pixels Position = (333.7, 307.6) = 18 52 32.43 0 39 33.3 Extent = 16.7 (16.7-16.7)", rotation angle = 0 Source counts = 1036.2 +/- 72.5 Background counts = 4218.9 Rate = 0.03 +/- 0.002 [Tue May 21 00:42:50 2013] Vigneting correction estimate = 1.000000 [Tue May 21 00:42:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 21 00:42:50 2013] Assessing source extent using major axis lower bound [Tue May 21 00:42:50 2013] Source does appear to be extended [Tue May 21 00:42:50 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 21 00:43:44 2013] Counts = 1036.240000, rescaling region sizes by 2.000000 [Tue May 21 00:43:44 2013] XMMSAS src. selection expression = ellipse(28980.634000, 26711.062000, 2000.832058, 2000.832058, 0.000000, X, Y) [Tue May 21 00:43:44 2013] Not overwriting source region fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src13_src.reg [Tue May 21 00:43:44 2013] Extracting stamp from image fullrun_pn_xmm0550670501_pi300-10000_cl_sm2.00.img.gz, (219, 193) - (449, 423) [Tue May 21 00:43:44 2013] XMMSAS bgd. selection expression = annulus(28980.634000, 26711.062000, 6669.440192, 13338.880384, X, Y) && !ellipse(27744.962646, 27279.854614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25125.606323, 27170.456787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28153.264000, 27004.320000, 1180.720034, 1180.720034, 0.000000, X, Y) && !ellipse(25990.960000, 24318.414000, 1108.960032, 1108.960032, 0.000000, X, Y) && !ellipse(28329.034000, 27068.219200, 667.133619, 667.133619, 0.000000, X, Y) && !ellipse(26507.036652, 26646.510651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26162.884000, 26381.714000, 1091.264031, 764.427222, 143.842000, X, Y) && !ellipse(28898.766000, 25988.396000, 2361.440068, 2361.440068, 0.000000, X, Y) && !ellipse(25514.636000, 25892.950000, 2182.528063, 2182.528063, 0.000000, X, Y) && !ellipse(25614.155609, 24747.904510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27009.448000, 24609.552000, 1151.944033, 1151.944033, 0.000000, X, Y) && !ellipse(27131.708000, 27613.102000, 361.633610, 361.633610, 0.000000, X, Y) && !ellipse(28525.612946, 28023.140686, 870.000000, 870.000000, 0.000000, X, Y) [Tue May 21 00:43:44 2013] Writing fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src13.gif [Tue May 21 00:44:07 2013] ../../xmm0550670501/products/events/fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src13_src.evt and ../../xmm0550670501/products/events/fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src13_bgd.evt exist, delete to re-create [Tue May 21 00:44:08 2013] Mean detx,y = (1455.18, 656.57) [Tue May 21 00:44:08 2013] ../../xmm0550670501/products/images/fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src13_src.img and ../../xmm0550670501/products/images/fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src13_bgd.img exist, delete to re-create [Tue May 21 00:44:08 2013] ../../xmm0550670501/products/spectra/fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src13_src_b10.pi.gz and ../../xmm0550670501/products/spectra/fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src13_bgd.pi exist, delete to re-create [Tue May 21 00:44:08 2013] Setting source spectrum file to fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src13_src_b10.pi.gz [Tue May 21 00:44:08 2013] Setting bgd. spectrum file to fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src13_bgd.pi.gz [Tue May 21 00:44:08 2013] ../../xmm0550670501/products/lightcurves/fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src13_src.lc and ../../xmm0550670501/products/lightcurves/fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src13_bgd.lc exist, delete to re-create [Tue May 21 09:52:01 2013] fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src13.rmf exists, delete to re-create [Tue May 21 09:52:01 2013] fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src13.arf exists, delete to re-create [Wed May 22 13:51:55 2013] Updating aperture counts using extracted products [Wed May 22 13:51:56 2013] Total counts from fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 29721.00 [Wed May 22 13:51:56 2013] Total counts from fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src13_bgd.pi.gz = 0.00 [Wed May 22 13:51:56 2013] Got source and background scale factors 9644055.000000, 262066.000000 [Wed May 22 13:51:56 2013] User source parameters: Position = (333.7, 307.6) = 18 52 32.43 0 39 33.3 Extent = 16.7 (16.7-16.7)", rotation angle = 0 Source aperture counts = 29721.0 +/- 173.4 Background aperture counts = 0.0 Rate = 0.9 +/- 0.005 [Wed May 22 13:51:57 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 22 13:51:57 2013] Using photon index=1.80, rate=0.0308, arf fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src13.arf [Wed May 22 13:51:57 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 22 13:51:57 2013] Updating source flux to 1.7e-13 [Wed May 22 13:53:35 2013] Flag c found in src. 13 procflags, skipping spectral fitting [Wed May 22 13:53:47 2013] xmm0550670501/analysis//spectral/fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete