[Tue May 21 00:40:20 2013] Detection parameters:
  Position = (314.9, 285.0) = 18 52 37.87 0 37 55.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1609.7 +/- 58.3
  Background counts = 253.8
  Rate = 0.07 +/- 0.003

[Tue May 21 00:40:20 2013] Off-axis axis estimate = 1.54'
[Tue May 21 00:41:17 2013] Using EEF radius (= 7.20 ")to estimate initial spatial extent for simple fitting
[Tue May 21 00:41:17 2013] Initial guess for spatial extent in simple fitting = 7.20"
[Tue May 21 00:41:17 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.861
[Tue May 21 00:41:17 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 7.20"
[Tue May 21 00:41:18 2013] fullrun_pn_xmm0550670501_pi300-10000_cl_pass0_src11.ximg exists
[Tue May 21 00:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550670501_pi300-10000_cl_pass0_src11.csv
[Tue May 21 00:41:18 2013] fullrun_pn_xmm0550670501_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue May 21 00:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550670501_pi300-10000_cl_pass0_src11.csv
[Tue May 21 00:41:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550670501_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550670501_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:41:19 2013] fullrun_pn_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue May 21 00:41:19 2013] fullrun_pn_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue May 21 00:41:19 2013] Fit fullrun_pn_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Tue May 21 00:41:35 2013] Spatial fit model total counts = 8410.600000, observed total counts = 8413.000000
[Tue May 21 00:41:35 2013] Offset between fit and detection position for source 11 = 4.210062 pixels
[Tue May 21 00:41:35 2013] 8715.180000 total counts/ 6350.750000 bgd. counts: snr = 29.669754
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 4.210062 pixels
  Position = (311.0, 283.4) = 18 52 39.00 0 37 48.2
  Extent = 14.4 (14.3-28.8)", rotation angle = 0
  Source counts = 2364.4 +/- 93.4
  Background counts = 6350.8
  Rate = 0.07 +/- 0.003
[Tue May 21 00:41:35 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:41:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:41:35 2013] Assessing source extent using major axis lower bound
[Tue May 21 00:41:35 2013] Source does appear to be extended
[Tue May 21 00:41:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 00:42:34 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 21 00:42:34 2013] Initial guess for spatial extent in simple fitting = 14.40"
[Tue May 21 00:42:34 2013] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.964
[Tue May 21 00:42:34 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 14.40"
[Tue May 21 00:42:35 2013] fullrun_pn_xmm0550670501_pi300-10000_cl_pass1_src11.ximg exists
[Tue May 21 00:42:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550670501_pi300-10000_cl_pass1_src11.csv
[Tue May 21 00:42:35 2013] fullrun_pn_xmm0550670501_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue May 21 00:42:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550670501_pi300-10000_cl_pass1_src11.csv
[Tue May 21 00:42:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550670501_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550670501_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:42:36 2013] fullrun_pn_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue May 21 00:42:36 2013] fullrun_pn_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue May 21 00:42:36 2013] Fit fullrun_pn_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Tue May 21 00:42:50 2013] Source 11 is offset by 0.278506 and 1.620439 pixels which is larger than
2 X fitted extent = 1.601053 x 1.601053, not incorporating fit results
[Tue May 21 00:42:50 2013] Warning, spatial fit 11 centroid is now closest to src. 10
[Tue May 21 00:42:50 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:42:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:42:50 2013] Assessing source extent using major axis lower bound
[Tue May 21 00:42:50 2013] Source does appear to be extended
[Tue May 21 00:42:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 00:43:44 2013] Counts = 2364.430000, rescaling region sizes by 2.000000
[Tue May 21 00:43:44 2013] XMMSAS src. selection expression = ellipse(27009.448000, 24609.552000, 1727.916050, 1727.916050, 0.000000, X, Y)
[Tue May 21 00:43:44 2013] Not overwriting source region fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src11_src.reg
[Tue May 21 00:43:44 2013] Extracting stamp from image fullrun_pn_xmm0550670501_pi300-10000_cl_sm2.00.img.gz, (212, 184) - (410, 383)
[Tue May 21 00:43:44 2013] XMMSAS bgd. selection expression = annulus(27009.448000, 24609.552000, 5759.720166, 11519.440331, X, Y) && !ellipse(27744.962646, 27279.854614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25125.606323, 27170.456787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28153.264000, 27004.320000, 1180.720034, 1180.720034, 0.000000, X, Y) && !ellipse(25990.960000, 24318.414000, 1108.960032, 1108.960032, 0.000000, X, Y) && !ellipse(28329.034000, 27068.219200, 667.133619, 667.133619, 0.000000, X, Y) && !ellipse(26507.036652, 26646.510651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26162.884000, 26381.714000, 1091.264031, 764.427222, 143.842000, X, Y) && !ellipse(28898.766000, 25988.396000, 2361.440068, 2361.440068, 0.000000, X, Y) && !ellipse(25514.636000, 25892.950000, 2182.528063, 2182.528063, 0.000000, X, Y) && !ellipse(25614.155609, 24747.904510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27131.708000, 27613.102000, 361.633610, 361.633610, 0.000000, X, Y) && !ellipse(28980.634000, 26711.062000, 1333.888038, 1333.888038, 0.000000, X, Y) && !ellipse(28525.612946, 28023.140686, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 21 00:43:44 2013] Writing fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src11.gif
[Tue May 21 00:44:04 2013] ../../xmm0550670501/products/events/fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src11_src.evt and ../../xmm0550670501/products/events/fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src11_bgd.evt exist, delete to re-create
[Tue May 21 00:44:05 2013] Mean detx,y = (12.96, 2420.53) 
[Tue May 21 00:44:05 2013] ../../xmm0550670501/products/images/fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src11_src.img and ../../xmm0550670501/products/images/fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src11_bgd.img exist, delete to re-create
[Tue May 21 00:44:05 2013] ../../xmm0550670501/products/spectra/fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src11_src_b10.pi.gz and ../../xmm0550670501/products/spectra/fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src11_bgd.pi exist, delete to re-create
[Tue May 21 00:44:05 2013] Setting source spectrum file to fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue May 21 00:44:05 2013] Setting bgd. spectrum file to fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Tue May 21 00:44:05 2013] ../../xmm0550670501/products/lightcurves/fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src11_src.lc and ../../xmm0550670501/products/lightcurves/fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src11_bgd.lc exist, delete to re-create
[Tue May 21 09:52:01 2013] fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src11.rmf exists, delete to re-create
[Tue May 21 09:52:01 2013] fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src11.arf exists, delete to re-create
[Wed May 22 13:51:55 2013] Updating aperture counts using extracted products
[Wed May 22 13:51:55 2013] Total counts from fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 26194.00
[Wed May 22 13:51:55 2013] Total counts from fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src11_bgd.pi.gz = 0.00
[Wed May 22 13:51:55 2013] Got source and background scale factors 9230106.000000, 195422.000000
[Wed May 22 13:51:55 2013] User source parameters:
  Position = (311.0, 283.4) = 18 52 39.00 0 37 48.2
  Extent = 14.4 (14.3-28.8)", rotation angle = 0
  Source aperture counts = 26194.0 +/- 162.8
  Background aperture counts = 0.0
  Rate = 0.8 +/- 0.005

[Wed May 22 13:51:57 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 13:51:57 2013] Using photon index=1.80, rate=0.0702, arf fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src11.arf
[Wed May 22 13:51:57 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 13:51:57 2013] Updating source flux to 4.4e-13
[Wed May 22 13:53:35 2013] Flag b found in src. 11 procflags, skipping spectral fitting
[Wed May 22 13:53:47 2013] xmm0550670501/analysis//spectral/fullrun_pn_xmm0550670501_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete