[Tue May 21 00:40:34 2013] Detection parameters:
  Position = (269.9, 214.0) = 18 52 50.92 0 32 47.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.7 +/- 10.9
  Background counts = 19.6
  Rate = 0.002 +/- 0.0005

[Tue May 21 00:40:35 2013] Off-axis axis estimate = 6.46'
[Tue May 21 00:41:24 2013] Using EEF radius (= 9.66 ")to estimate initial spatial extent for simple fitting
[Tue May 21 00:41:24 2013] Initial guess for spatial extent in simple fitting = 9.66"
[Tue May 21 00:41:24 2013] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.216
[Tue May 21 00:41:24 2013] Giving source the simple spatial ID 54 for pass 0, mean size = 9.66"
[Tue May 21 00:41:27 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src54.ximg exists
[Tue May 21 00:41:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src54.csv
[Tue May 21 00:41:27 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src54_1.ximg exists
[Tue May 21 00:41:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src54.csv
[Tue May 21 00:41:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:41:28 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Tue May 21 00:41:28 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Tue May 21 00:41:28 2013] Fit fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src54 appears to have run properly
[Tue May 21 00:42:11 2013] Spatial fit model total counts = 383.762000, observed total counts = 384.000000
[Tue May 21 00:42:11 2013] Offset between fit and detection position for source 56 = 9.678834 pixels
[Tue May 21 00:42:11 2013] 423.781500 total counts/ 331.630000 bgd. counts: snr = 5.060291
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 9.678834 pixels
  Position = (262.0, 208.3) = 18 52 53.20 0 32 21.6
  Extent = 19.3 (19.3-38.6)", rotation angle = 0
  Source counts = 92.2 +/- 20.6
  Background counts = 331.6
  Rate = 0.003 +/- 0.0006
[Tue May 21 00:42:11 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:42:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:42:11 2013] Assessing source extent using major axis lower bound
[Tue May 21 00:42:11 2013] Source does appear to be extended
[Tue May 21 00:42:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 00:42:39 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 21 00:42:39 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 21 00:42:39 2013] Initial guess for spatial extent in simple fitting = 19.32"
[Tue May 21 00:42:39 2013] source mask rpix=4.4, npix_max = 97, mask sum = 100, frac = 1.024
[Tue May 21 00:42:39 2013] Giving source the simple spatial ID 50 for pass 1, mean size = 19.32"
[Tue May 21 00:42:42 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src50.ximg exists
[Tue May 21 00:42:42 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src50.csv
[Tue May 21 00:42:42 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src50_1.ximg exists
[Tue May 21 00:42:42 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src50.csv
[Tue May 21 00:42:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:42:43 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Tue May 21 00:42:43 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src50.csv
[Tue May 21 00:42:43 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Tue May 21 00:42:43 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src50.csv
[Tue May 21 00:42:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:42:50 2013] Warning, spatial fit 7 centroid is now closest to src. 9
[Tue May 21 00:42:50 2013] Warning, spatial fit 8 centroid is now closest to src. 1
[Tue May 21 00:42:50 2013] Warning, spatial fit 9 centroid is now closest to src. 2
[Tue May 21 00:42:50 2013] Warning, spatial fit 12 centroid is now closest to src. 1
[Tue May 21 00:42:50 2013] Warning, spatial fit 13 centroid is now closest to src. 14
[Tue May 21 00:43:05 2013] Warning, spatial fit 8 centroid is now closest to src. 49
[Tue May 21 00:43:05 2013] Warning, spatial fit 11 centroid is now closest to src. 11
[Tue May 21 00:43:05 2013] Warning, spatial fit 15 centroid is now closest to src. 14
[Tue May 21 00:43:05 2013] Warning, spatial fit 37 centroid is now closest to src. 22
[Tue May 21 00:43:22 2013] Warning, spatial fit 14 centroid is now closest to src. 5
[Tue May 21 00:43:22 2013] Warning, spatial fit 25 centroid is now closest to src. 23
[Tue May 21 00:43:22 2013] Warning, spatial fit 33 centroid is now closest to src. 28
[Tue May 21 00:43:22 2013] Warning, spatial fit 50 centroid is now closest to src. 57
[Tue May 21 00:43:22 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:43:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:43:22 2013] Assessing source extent using major axis lower bound
[Tue May 21 00:43:22 2013] Source does appear to be extended
[Tue May 21 00:43:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 09:52:04 2013] XMMSAS src. selection expression = ellipse(22749.804000, 18077.170000, 1159.146033, 1159.146033, 0.000000, X, Y)
[Wed May 22 09:52:04 2013] Not overwriting source region fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src56_src.reg
[Wed May 22 09:52:04 2013] Extracting stamp from image fullrun_mos2_xmm0550670501_pi300-10000_cl_sm2.00.img.gz, (195, 142) - (329, 275)
[Wed May 22 09:52:04 2013] XMMSAS bgd. selection expression = annulus(22749.804000, 18077.170000, 1931.910056, 3863.820111, X, Y) && !ellipse(24684.217600, 19175.153200, 471.324814, 471.324814, 0.000000, X, Y) && !ellipse(21108.779312, 14452.069946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24606.274628, 18421.216614, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 22 09:52:04 2013] Writing fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src56.gif
[Wed May 22 10:00:29 2013] Mean detx,y = (3868.90, -9530.29) 
[Wed May 22 10:00:31 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 10:01:10 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 10:01:10 2013] Setting source spectrum file to fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Wed May 22 10:01:10 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Wed May 22 13:51:10 2013] Not generating rmf since there are only 92 counts
[Wed May 22 13:51:10 2013] rmf not generated due to insufficient counts
[Wed May 22 13:52:23 2013] Updating aperture counts using extracted products
[Wed May 22 13:52:23 2013] Total counts from fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src56_src_b10.pi.gz = 512.00
[Wed May 22 13:52:23 2013] Total counts from fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src56_bgd.pi.gz = 3779.00
[Wed May 22 13:52:23 2013] Got source and background scale factors 4223180.000000, 30950448.000000
[Wed May 22 13:52:23 2013] User source parameters:
  Position = (262.0, 208.3) = 18 52 53.20 0 32 21.6
  Extent = 19.3 (19.3-38.6)", rotation angle = 0
  Source aperture counts = -3.6 +/- 23.6
  Background aperture counts = 515.6
  Rate = -0.0001 +/- 0.0007

[Wed May 22 13:52:26 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 13:52:26 2013] Using photon index=1.80, rate=0.00273, arf fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src56.arf
[Wed May 22 13:52:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 13:52:26 2013] Updating source flux to 7.9e-14
[Wed May 22 13:53:08 2013] Source 56 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 22 13:53:35 2013] xmm0550670501/analysis//spectral/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src56_pl.csv not found, spectral fit skipped or did not complete