[Tue May 21 00:40:33 2013] Detection parameters:
  Position = (310.7, 324.8) = 18 52 39.08 0 40 50.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 128.6 +/- 21.2
  Background counts = 105.7
  Rate = 0.004 +/- 0.0007

[Tue May 21 00:40:35 2013] Off-axis axis estimate = 2.11'
[Tue May 21 00:41:24 2013] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Tue May 21 00:41:24 2013] Initial guess for spatial extent in simple fitting = 7.48"
[Tue May 21 00:41:24 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.811
[Tue May 21 00:41:24 2013] Giving source the simple spatial ID 43 for pass 0, mean size = 7.48"
[Tue May 21 00:41:26 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src43.ximg exists
[Tue May 21 00:41:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src43.csv
[Tue May 21 00:41:26 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src43_1.ximg exists
[Tue May 21 00:41:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src43.csv
[Tue May 21 00:41:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:41:28 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Tue May 21 00:41:28 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Tue May 21 00:41:28 2013] Fit fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Tue May 21 00:42:11 2013] Source 44 is offset by -7.976362 and -0.883863 pixels which is larger than
2 X fitted extent = 0.839526 x 0.839526, not incorporating fit results
[Tue May 21 00:42:11 2013] Warning, spatial fit 43 centroid is now closest to src. 15
[Tue May 21 00:42:11 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:42:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:42:11 2013] Assessing source extent using major
[Tue May 21 00:42:11 2013] Source does appear to be extended
[Tue May 21 00:42:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 00:42:11 2013] Source is confused with source 15
[Tue May 21 00:42:39 2013] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Tue May 21 00:42:39 2013] Initial guess for spatial extent in simple fitting = 7.48"
[Tue May 21 00:42:39 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.811
[Tue May 21 00:42:39 2013] Giving source the simple spatial ID 41 for pass 1, mean size = 7.48"
[Tue May 21 00:42:41 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src41.ximg exists
[Tue May 21 00:42:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src41.csv
[Tue May 21 00:42:41 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src41_1.ximg exists
[Tue May 21 00:42:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src41.csv
[Tue May 21 00:42:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:42:43 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Tue May 21 00:42:43 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Tue May 21 00:42:43 2013] Fit fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Tue May 21 00:43:22 2013] Source 44 is offset by -1.582936 and 6.762574 pixels which is larger than
2 X fitted extent = 1.605264 x 1.605264, not incorporating fit results
[Tue May 21 00:43:22 2013] Spatial fit model total counts = 2549.740000, observed total counts = 2541.000000
[Tue May 21 00:43:22 2013] Offset between fit and detection position for source 44 = 7.080387 pixels
[Tue May 21 00:43:22 2013] 2155.591000 total counts/ 1853.590000 bgd. counts: snr = 7.014578
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 7.080387 pixels
  Position = (304.4, 327.9) = 18 52 40.93 0 41 1.8
  Extent = 15.0 (14.9-29.9)", rotation angle = 0
  Source counts = 302.0 +/- 46.4
  Background counts = 1853.6
  Rate = 0.009 +/- 0.001
[Tue May 21 00:43:22 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:43:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:43:22 2013] Assessing source extent using major axis lower bound
[Tue May 21 00:43:22 2013] Source does appear to be extended
[Tue May 21 00:43:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 09:52:04 2013] XMMSAS src. selection expression = ellipse(26431.522000, 28480.520000, 898.110026, 898.110026, 0.000000, X, Y)
[Wed May 22 09:52:04 2013] Not overwriting source region fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src44_src.reg
[Wed May 22 09:52:04 2013] Extracting stamp from image fullrun_mos2_xmm0550670501_pi300-10000_cl_sm2.00.img.gz, (253, 276) - (356, 380)
[Wed May 22 09:52:04 2013] XMMSAS bgd. selection expression = annulus(26431.522000, 28480.520000, 1496.850043, 2993.700086, X, Y) && !ellipse(27124.762800, 27626.509800, 324.378409, 324.378409, 0.000000, X, Y) && !ellipse(27228.033752, 24749.030243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25215.178000, 25395.666000, 1097.520032, 1097.520032, 0.000000, X, Y) && !ellipse(29153.820200, 26198.730200, 837.952024, 837.952024, 0.000000, X, Y) && !ellipse(27974.304077, 25097.306366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24512.224000, 26013.358000, 1124.392032, 1124.392032, 0.000000, X, Y) && !ellipse(26077.916000, 24197.250000, 1925.256055, 1776.752051, 340.123000, X, Y) && !ellipse(25621.422424, 24923.991364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28322.552000, 27023.922400, 572.545616, 572.545616, 0.000000, X, Y) && !ellipse(26454.724000, 26315.926000, 1233.504035, 1233.504035, 0.000000, X, Y) && !ellipse(24954.964400, 27628.772000, 957.496028, 957.496028, 0.000000, X, Y) && !ellipse(29139.436000, 26668.574000, 2258.696065, 2258.696065, 0.000000, X, Y) && !ellipse(23815.696400, 26565.664400, 1003.504029, 1003.504029, 0.000000, X, Y) && !ellipse(28515.401200, 28155.730800, 1256.320036, 1256.320036, 0.000000, X, Y) && !ellipse(29523.280000, 30109.646000, 1374.640040, 1374.640040, 0.000000, X, Y) && !ellipse(27142.412229, 30139.219315, 1961.360056, 875.993230, 0.077332, X, Y) && !ellipse(24073.401200, 28187.064000, 926.184027, 926.184027, 0.000000, X, Y) && !ellipse(29438.857800, 27170.442000, 1292.768037, 1292.768037, 0.000000, X, Y) && !ellipse(27527.706000, 27188.588000, 1114.288032, 1114.288032, 0.000000, X, Y) && !ellipse(21975.632800, 27742.202000, 2331.448067, 2331.448067, 0.000000, X, Y) && !ellipse(24229.111786, 27615.261810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27018.209442, 26576.696655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24020.287400, 29872.885240, 1044.568030, 1044.568030, 0.000000, X, Y) && !ellipse(27305.512817, 25684.168732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30617.046000, 28405.700800, 1404.960040, 1404.960040, 0.000000, X, Y) && !ellipse(28013.978180, 29265.043915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22279.911600, 26066.208000, 1404.960040, 510.257615, 91.563000, X, Y) && !ellipse(24876.763702, 28193.083801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28851.077057, 30213.502686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23304.139404, 24912.861481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25720.248000, 27299.336000, 1157.744033, 1157.744033, 0.000000, X, Y) && !ellipse(28593.602936, 29270.385834, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 22 09:52:04 2013] Writing fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src44.gif
[Wed May 22 09:58:00 2013] Mean detx,y = (709.31, 800.09) 
[Wed May 22 09:58:03 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 09:58:22 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 09:58:22 2013] Setting source spectrum file to fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Wed May 22 09:58:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Wed May 22 13:52:21 2013] Updating aperture counts using extracted products
[Wed May 22 13:52:21 2013] Total counts from fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src44_src_b10.pi.gz = 1683.00
[Wed May 22 13:52:21 2013] Total counts from fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src44_bgd.pi.gz = 657.00
[Wed May 22 13:52:21 2013] Got source and background scale factors 2540800.000000, 1968852.000000
[Wed May 22 13:52:21 2013] User source parameters:
  Position = (304.4, 327.9) = 18 52 40.93 0 41 1.8
  Extent = 15.0 (14.9-29.9)", rotation angle = 0
  Source aperture counts = 835.1 +/- 42.0
  Background aperture counts = 847.9
  Rate = 0.02 +/- 0.001

[Wed May 22 13:52:25 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 13:52:25 2013] Using photon index=1.80, rate=0.00893, arf fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src44.arf
[Wed May 22 13:52:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 13:52:25 2013] Updating source flux to 1.6e-13
[Wed May 22 13:53:08 2013] Flag b found in src. 44 procflags, skipping spectral fitting
[Wed May 22 13:53:08 2013] Flag c found in src. 44 procflags, skipping spectral fitting
[Wed May 22 13:53:35 2013] xmm0550670501/analysis//spectral/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src44_pl.csv not found, spectral fit skipped or did not complete