[Tue May 21 00:40:33 2013] Detection parameters:
  Position = (329.2, 337.0) = 18 52 33.72 0 41 43.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.8 +/- 16.9
  Background counts = 90.7
  Rate = 0.002 +/- 0.0006

[Tue May 21 00:40:35 2013] Off-axis axis estimate = 3.58'
[Tue May 21 00:41:24 2013] Using EEF radius (= 8.22 ")to estimate initial spatial extent for simple fitting
[Tue May 21 00:41:24 2013] Initial guess for spatial extent in simple fitting = 8.22"
[Tue May 21 00:41:24 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.876
[Tue May 21 00:41:24 2013] Giving source the simple spatial ID 53 for pass 0, mean size = 8.22"
[Tue May 21 00:41:27 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src53.ximg exists
[Tue May 21 00:41:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src53.csv
[Tue May 21 00:41:27 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src53_1.ximg exists
[Tue May 21 00:41:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src53.csv
[Tue May 21 00:41:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:41:28 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Tue May 21 00:41:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src53.csv
[Tue May 21 00:41:28 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Tue May 21 00:41:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src53.csv
[Tue May 21 00:41:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:42:11 2013] Source 42 is offset by -5.782311 and 6.157883 pixels which is larger than
2 X fitted extent = 2.257802 x 2.257802, not incorporating fit results
[Tue May 21 00:42:11 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:42:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:42:11 2013] Assessing source extent using major
[Tue May 21 00:42:11 2013] Source does appear to be extended
[Tue May 21 00:42:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 00:42:11 2013] Source is confused with source 43
[Tue May 21 00:42:39 2013] Using EEF radius (= 8.22 ")to estimate initial spatial extent for simple fitting
[Tue May 21 00:42:39 2013] Initial guess for spatial extent in simple fitting = 8.22"
[Tue May 21 00:42:39 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.876
[Tue May 21 00:42:39 2013] Giving source the simple spatial ID 49 for pass 1, mean size = 8.22"
[Tue May 21 00:42:42 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src49.ximg exists
[Tue May 21 00:42:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src49.csv
[Tue May 21 00:42:42 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src49_1.ximg exists
[Tue May 21 00:42:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src49.csv
[Tue May 21 00:42:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:42:43 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Tue May 21 00:42:43 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Tue May 21 00:42:43 2013] Fit fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src49 appears to have run properly
[Tue May 21 00:43:22 2013] Warning, spatial fit 49 centroid is now closest to src. 23
[Tue May 21 00:43:22 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:43:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:43:22 2013] Assessing source extent using major
[Tue May 21 00:43:22 2013] Source does appear to be extended
[Tue May 21 00:43:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 09:52:04 2013] XMMSAS src. selection expression = ellipse(28593.602936, 29270.385834, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 09:52:04 2013] Not overwriting source region fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src42_src.reg
[Wed May 22 09:52:04 2013] Extracting stamp from image fullrun_mos2_xmm0550670501_pi300-10000_cl_sm2.00.img.gz, (292, 299) - (367, 374)
[Wed May 22 09:52:04 2013] XMMSAS bgd. selection expression = annulus(28593.602936, 29270.385834, 1087.500000, 2175.000000, X, Y) && !ellipse(27124.762800, 27626.509800, 324.378409, 324.378409, 0.000000, X, Y) && !ellipse(28322.552000, 27023.922400, 572.545616, 572.545616, 0.000000, X, Y) && !ellipse(26454.724000, 26315.926000, 1233.504035, 1233.504035, 0.000000, X, Y) && !ellipse(29139.436000, 26668.574000, 2258.696065, 2258.696065, 0.000000, X, Y) && !ellipse(28515.401200, 28155.730800, 1256.320036, 1256.320036, 0.000000, X, Y) && !ellipse(29523.280000, 30109.646000, 1374.640040, 1374.640040, 0.000000, X, Y) && !ellipse(27142.412229, 30139.219315, 1961.360056, 875.993230, 0.077332, X, Y) && !ellipse(29438.857800, 27170.442000, 1292.768037, 1292.768037, 0.000000, X, Y) && !ellipse(27527.706000, 27188.588000, 1114.288032, 1114.288032, 0.000000, X, Y) && !ellipse(27018.209442, 26576.696655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30617.046000, 28405.700800, 1404.960040, 1404.960040, 0.000000, X, Y) && !ellipse(28013.978180, 29265.043915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31074.446381, 28208.995392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26431.522000, 28480.520000, 1197.480034, 1197.480034, 0.000000, X, Y) && !ellipse(30850.680511, 29523.301270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28851.077057, 30213.502686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25720.248000, 27299.336000, 1157.744033, 1157.744033, 0.000000, X, Y)
[Wed May 22 09:52:04 2013] Writing fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src42.gif
[Wed May 22 10:00:09 2013] Mean detx,y = (-1299.68, 1819.22) 
[Wed May 22 10:00:11 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 10:00:22 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 10:00:22 2013] Setting source spectrum file to fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Wed May 22 10:00:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Wed May 22 13:51:05 2013] Not generating rmf since there are only 70 counts
[Wed May 22 13:51:05 2013] rmf not generated due to insufficient counts
[Wed May 22 13:52:22 2013] Updating aperture counts using extracted products
[Wed May 22 13:52:23 2013] Total counts from fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src42_src_b10.pi.gz = 1115.00
[Wed May 22 13:52:23 2013] Total counts from fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src42_bgd.pi.gz = 150.00
[Wed May 22 13:52:23 2013] Got source and background scale factors 1332800.000000, 442936.000000
[Wed May 22 13:52:23 2013] User source parameters:
  Position = (329.2, 337.0) = 18 52 33.72 0 41 43.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 663.6 +/- 34.4
  Background aperture counts = 451.4
  Rate = 0.02 +/- 0.001

[Wed May 22 13:52:23 2013] Updating counts from extracted products
[Wed May 22 13:52:23 2013] Set source signif. to 663.65/21.25 = 31.24
[Wed May 22 13:52:26 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 13:52:26 2013] Using photon index=1.80, rate=0.0196, arf fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src42.arf
[Wed May 22 13:52:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 13:52:26 2013] Updating source flux to 3.7e-13
[Wed May 22 13:53:08 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 13:53:35 2013] xmm0550670501/analysis//spectral/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src42_pl.csv not found, spectral fit skipped or did not complete