[Tue May 21 00:40:33 2013] Detection parameters:
  Position = (282.6, 278.0) = 18 52 47.23 0 37 24.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 168.3 +/- 20.2
  Background counts = 48.2
  Rate = 0.006 +/- 0.0007

[Tue May 21 00:40:35 2013] Off-axis axis estimate = 1.87'
[Tue May 21 00:41:23 2013] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Tue May 21 00:41:23 2013] Initial guess for spatial extent in simple fitting = 7.36"
[Tue May 21 00:41:23 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.040
[Tue May 21 00:41:24 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 7.36"
[Tue May 21 00:41:26 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src30.ximg exists
[Tue May 21 00:41:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src30.csv
[Tue May 21 00:41:26 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src30_1.ximg exists
[Tue May 21 00:41:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src30.csv
[Tue May 21 00:41:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:41:28 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Tue May 21 00:41:28 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Tue May 21 00:41:28 2013] Fit fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Tue May 21 00:42:11 2013] Warning, spatial fit 30 centroid is now closest to src. 53
[Tue May 21 00:42:11 2013] Spatial fit model total counts = 853.980000, observed total counts = 849.000000
[Tue May 21 00:42:11 2013] Offset between fit and detection position for source 36 = 0.651794 pixels
[Tue May 21 00:42:11 2013] Warning, changing simple spatial fit ID from 30 to 55
[Tue May 21 00:42:11 2013] 895.470900 total counts/ 855.238000 bgd. counts: snr = 1.375745
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.651794 pixels
  Position = (282.3, 277.5) = 18 52 47.33 0 37 22.2
  Extent = 6.4 (2.4-14.0)", rotation angle = 0
  Source counts = 40.2 +/- 29.9
  Background counts = 855.2
  Rate = 0.001 +/- 0.0009
  Deleting source due to low Poisson probability