[Tue May 21 00:40:29 2013] Detection parameters:
  Position = (326.2, 311.0) = 18 52 34.60 0 39 48.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 587.2 +/- 34.2
  Background counts = 87.9
  Rate = 0.02 +/- 0.001

[Tue May 21 00:40:35 2013] Off-axis axis estimate = 2.21'
[Tue May 21 00:41:23 2013] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Tue May 21 00:41:23 2013] Initial guess for spatial extent in simple fitting = 7.53"
[Tue May 21 00:41:23 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.803
[Tue May 21 00:41:23 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 7.53"
[Tue May 21 00:41:25 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src10.ximg exists
[Tue May 21 00:41:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src10.csv
[Tue May 21 00:41:25 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue May 21 00:41:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src10.csv
[Tue May 21 00:41:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:41:27 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue May 21 00:41:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue May 21 00:41:27 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue May 21 00:41:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue May 21 00:41:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:42:11 2013] Spatial fit model total counts = 7836.110000, observed total counts = 2928.000000
[Tue May 21 00:42:11 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 21 00:42:11 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:42:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:42:11 2013] Assessing source extent using major
[Tue May 21 00:42:11 2013] Source does appear to be extended
[Tue May 21 00:42:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 00:42:11 2013] Source is confused with source 4
[Tue May 21 00:42:39 2013] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Tue May 21 00:42:39 2013] Initial guess for spatial extent in simple fitting = 7.53"
[Tue May 21 00:42:39 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.803
[Tue May 21 00:42:39 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 7.53"
[Tue May 21 00:42:40 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src10.ximg exists
[Tue May 21 00:42:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src10.csv
[Tue May 21 00:42:40 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue May 21 00:42:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src10.csv
[Tue May 21 00:42:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:42:42 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue May 21 00:42:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue May 21 00:42:42 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue May 21 00:42:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue May 21 00:42:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:43:22 2013] Spatial fit model total counts = 7444.350000, observed total counts = 2928.000000
[Tue May 21 00:43:22 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 21 00:43:22 2013] Spatial fit model total counts = 3216.890000, observed total counts = 3209.000000
[Tue May 21 00:43:22 2013] Offset between fit and detection position for source 3 = 0.180451 pixels
[Tue May 21 00:43:22 2013] Warning, changing simple spatial fit ID from 10 to 13
[Tue May 21 00:43:22 2013] 3201.087000 total counts/ 2998.520000 bgd. counts: snr = 3.699263
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.180451 pixels
  Position = (326.1, 311.2) = 18 52 34.63 0 39 48.9
  Extent = 7.2 (4.8-11.1)", rotation angle = 0
  Source counts = 202.6 +/- 56.6
  Background counts = 2998.5
  Rate = 0.006 +/- 0.002
[Tue May 21 00:43:22 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:43:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:43:22 2013] Assessing source extent using major axis lower bound
[Tue May 21 00:43:22 2013] Source does appear to be extended
[Tue May 21 00:43:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 09:52:02 2013] XMMSAS src. selection expression = ellipse(28322.552000, 27023.922400, 429.409212, 429.409212, 0.000000, X, Y)
[Wed May 22 09:52:02 2013] Not overwriting source region fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src3_src.reg
[Wed May 22 09:52:02 2013] Extracting stamp from image fullrun_mos2_xmm0550670501_pi300-10000_cl_sm2.00.img.gz, (301, 286) - (351, 336)
[Wed May 22 09:52:02 2013] XMMSAS bgd. selection expression = annulus(28322.552000, 27023.922400, 715.682021, 1431.364041, X, Y) && !ellipse(27124.762800, 27626.509800, 324.378409, 324.378409, 0.000000, X, Y) && !ellipse(27228.033752, 24749.030243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29153.820200, 26198.730200, 837.952024, 837.952024, 0.000000, X, Y) && !ellipse(27974.304077, 25097.306366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26077.916000, 24197.250000, 1925.256055, 1776.752051, 340.123000, X, Y) && !ellipse(26454.724000, 26315.926000, 1233.504035, 1233.504035, 0.000000, X, Y) && !ellipse(29139.436000, 26668.574000, 2258.696065, 2258.696065, 0.000000, X, Y) && !ellipse(28515.401200, 28155.730800, 1256.320036, 1256.320036, 0.000000, X, Y) && !ellipse(27142.412229, 30139.219315, 1961.360056, 875.993230, 0.077332, X, Y) && !ellipse(29438.857800, 27170.442000, 1292.768037, 1292.768037, 0.000000, X, Y) && !ellipse(27527.706000, 27188.588000, 1114.288032, 1114.288032, 0.000000, X, Y) && !ellipse(27018.209442, 26576.696655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27305.512817, 25684.168732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30617.046000, 28405.700800, 1404.960040, 1404.960040, 0.000000, X, Y) && !ellipse(28013.978180, 29265.043915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26431.522000, 28480.520000, 1197.480034, 1197.480034, 0.000000, X, Y) && !ellipse(28593.602936, 29270.385834, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 22 09:52:02 2013] Writing fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src3.gif
[Wed May 22 09:52:05 2013] ../../xmm0550670501/products/events/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0550670501/products/events/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Wed May 22 09:52:05 2013] Mean detx,y = (-1143.62, -394.27) 
[Wed May 22 09:52:05 2013] ../../xmm0550670501/products/images/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src3_src.img and ../../xmm0550670501/products/images/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Wed May 22 09:52:05 2013] ../../xmm0550670501/products/spectra/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0550670501/products/spectra/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Wed May 22 09:52:05 2013] Setting source spectrum file to fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed May 22 09:52:05 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed May 22 09:52:05 2013] ../../xmm0550670501/products/lightcurves/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0550670501/products/lightcurves/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Wed May 22 13:52:14 2013] Updating aperture counts using extracted products
[Wed May 22 13:52:14 2013] Total counts from fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 1087.00
[Wed May 22 13:52:14 2013] Total counts from fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src3_bgd.pi.gz = 0.00
[Wed May 22 13:52:14 2013] Got source and background scale factors 577600.000000, 0.000000
[Wed May 22 13:52:14 2013] Background scale factor is not positive, halting re-assessment of this source
[Wed May 22 13:52:23 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 13:52:23 2013] Using photon index=1.80, rate=0.00599, arf fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src3.arf
[Wed May 22 13:52:23 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 13:52:23 2013] Updating source flux to 1.1e-13
[Wed May 22 13:53:08 2013] Flag p found in src. 3 procflags, skipping spectral fitting
[Wed May 22 13:53:08 2013] Flag c found in src. 3 procflags, skipping spectral fitting
[Wed May 22 13:53:35 2013] xmm0550670501/analysis//spectral/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete