[Tue May 21 00:40:29 2013] Detection parameters:
  Position = (287.9, 313.0) = 18 52 45.69 0 39 57.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 475.4 +/- 33.4
  Background counts = 89.4
  Rate = 0.01 +/- 0.001

[Tue May 21 00:40:35 2013] Off-axis axis estimate = 1.30'
[Tue May 21 00:41:23 2013] Using EEF radius (= 7.08 ")to estimate initial spatial extent for simple fitting
[Tue May 21 00:41:23 2013] Initial guess for spatial extent in simple fitting = 7.08"
[Tue May 21 00:41:23 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.884
[Tue May 21 00:41:23 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 7.08"
[Tue May 21 00:41:25 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src12.ximg exists
[Tue May 21 00:41:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src12.csv
[Tue May 21 00:41:25 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src12_1.ximg exists
[Tue May 21 00:41:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src12.csv
[Tue May 21 00:41:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:41:27 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Tue May 21 00:41:27 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Tue May 21 00:41:27 2013] Fit fullrun_mos2_xmm0550670501_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Tue May 21 00:42:11 2013] Spatial fit model total counts = 2768.360000, observed total counts = 2760.000000
[Tue May 21 00:42:11 2013] Offset between fit and detection position for source 2 = 1.512389 pixels
[Tue May 21 00:42:11 2013] 2638.841000 total counts/ 2201.560000 bgd. counts: snr = 9.319559
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.512389 pixels
  Position = (287.1, 314.2) = 18 52 45.95 0 40 2.2
  Extent = 13.0 (10.6-14.2)", rotation angle = 0
  Source counts = 437.3 +/- 51.4
  Background counts = 2201.6
  Rate = 0.01 +/- 0.002
[Tue May 21 00:42:11 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:42:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:42:11 2013] Assessing source extent using major axis lower bound
[Tue May 21 00:42:11 2013] Source does appear to be extended
[Tue May 21 00:42:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 00:42:11 2013] Source is confused with source 28
[Tue May 21 00:42:11 2013] Source is confused with source 48
[Tue May 21 00:42:39 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 21 00:42:39 2013] Initial guess for spatial extent in simple fitting = 12.97"
[Tue May 21 00:42:39 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.011
[Tue May 21 00:42:39 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 12.97"
[Tue May 21 00:42:40 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src12.ximg exists
[Tue May 21 00:42:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src12.csv
[Tue May 21 00:42:40 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src12_1.ximg exists
[Tue May 21 00:42:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src12.csv
[Tue May 21 00:42:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:42:42 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Tue May 21 00:42:42 2013] fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Tue May 21 00:42:42 2013] Fit fullrun_mos2_xmm0550670501_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Tue May 21 00:43:22 2013] Warning, spatial fit 12 centroid is now closest to src. 22
[Tue May 21 00:43:22 2013] Spatial fit model total counts = 1807.370000, observed total counts = 1824.000000
[Tue May 21 00:43:22 2013] Offset between fit and detection position for source 2 = 3.919623 pixels
[Tue May 21 00:43:22 2013] Warning, changing simple spatial fit ID from 12 to 45
[Tue May 21 00:43:22 2013] 1632.497000 total counts/ 1474.450000 bgd. counts: snr = 4.115961
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 3.919623 pixels
  Position = (287.4, 318.1) = 18 52 45.85 0 40 19.2
  Extent = 12.0 (6.1-14.9)", rotation angle = 0
  Source counts = 158.0 +/- 40.4
  Background counts = 1474.5
  Rate = 0.005 +/- 0.001
[Tue May 21 00:43:22 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:43:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:43:22 2013] Assessing source extent using major axis lower bound
[Tue May 21 00:43:22 2013] Source does appear to be extended
[Tue May 21 00:43:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 09:52:03 2013] XMMSAS src. selection expression = ellipse(24954.964400, 27628.772000, 718.122021, 718.122021, 0.000000, X, Y)
[Wed May 22 09:52:03 2013] Not overwriting source region fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src2_src.reg
[Wed May 22 09:52:03 2013] Extracting stamp from image fullrun_mos2_xmm0550670501_pi300-10000_cl_sm2.00.img.gz, (246, 277) - (329, 359)
[Wed May 22 09:52:03 2013] XMMSAS bgd. selection expression = annulus(24954.964400, 27628.772000, 1196.870034, 2393.740069, X, Y) && !ellipse(27124.762800, 27626.509800, 324.378409, 324.378409, 0.000000, X, Y) && !ellipse(27228.033752, 24749.030243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25215.178000, 25395.666000, 1097.520032, 1097.520032, 0.000000, X, Y) && !ellipse(27974.304077, 25097.306366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24512.224000, 26013.358000, 1124.392032, 1124.392032, 0.000000, X, Y) && !ellipse(26077.916000, 24197.250000, 1925.256055, 1776.752051, 340.123000, X, Y) && !ellipse(25621.422424, 24923.991364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26454.724000, 26315.926000, 1233.504035, 1233.504035, 0.000000, X, Y) && !ellipse(29139.436000, 26668.574000, 2258.696065, 2258.696065, 0.000000, X, Y) && !ellipse(23815.696400, 26565.664400, 1003.504029, 1003.504029, 0.000000, X, Y) && !ellipse(28515.401200, 28155.730800, 1256.320036, 1256.320036, 0.000000, X, Y) && !ellipse(27142.412229, 30139.219315, 1961.360056, 875.993230, 0.077332, X, Y) && !ellipse(22343.960800, 26933.490000, 588.558417, 588.558417, 0.000000, X, Y) && !ellipse(24073.401200, 28187.064000, 926.184027, 926.184027, 0.000000, X, Y) && !ellipse(27527.706000, 27188.588000, 1114.288032, 1114.288032, 0.000000, X, Y) && !ellipse(21975.632800, 27742.202000, 2331.448067, 2331.448067, 0.000000, X, Y) && !ellipse(24229.111786, 27615.261810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27018.209442, 26576.696655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22316.619840, 26603.656000, 1055.856030, 1055.856030, 0.000000, X, Y) && !ellipse(24020.287400, 29872.885240, 1044.568030, 1044.568030, 0.000000, X, Y) && !ellipse(22347.914673, 27532.902802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27305.512817, 25684.168732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21867.576400, 28345.122000, 1353.544039, 1353.544039, 0.000000, X, Y) && !ellipse(28013.978180, 29265.043915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22279.911600, 26066.208000, 1404.960040, 510.257615, 91.563000, X, Y) && !ellipse(26431.522000, 28480.520000, 1197.480034, 1197.480034, 0.000000, X, Y) && !ellipse(24876.763702, 28193.083801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23304.139404, 24912.861481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25720.248000, 27299.336000, 1157.744033, 1157.744033, 0.000000, X, Y)
[Wed May 22 09:52:03 2013] Writing fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src2.gif
[Wed May 22 09:52:05 2013] ../../xmm0550670501/products/events/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0550670501/products/events/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Wed May 22 09:52:05 2013] Mean detx,y = (2294.83, -73.17) 
[Wed May 22 09:52:05 2013] ../../xmm0550670501/products/images/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src2_src.img and ../../xmm0550670501/products/images/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Wed May 22 09:52:05 2013] ../../xmm0550670501/products/spectra/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0550670501/products/spectra/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Wed May 22 09:52:05 2013] Setting source spectrum file to fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May 22 09:52:05 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed May 22 09:52:05 2013] ../../xmm0550670501/products/lightcurves/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0550670501/products/lightcurves/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Wed May 22 13:52:14 2013] Updating aperture counts using extracted products
[Wed May 22 13:52:14 2013] Total counts from fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 1957.00
[Wed May 22 13:52:14 2013] Total counts from fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src2_bgd.pi.gz = 268.00
[Wed May 22 13:52:14 2013] Got source and background scale factors 1597340.000000, 475256.000000
[Wed May 22 13:52:14 2013] User source parameters:
  Position = (287.4, 318.1) = 18 52 45.85 0 40 19.2
  Extent = 12.0 (6.1-14.9)", rotation angle = 0
  Source aperture counts = 1056.2 +/- 45.2
  Background aperture counts = 900.8
  Rate = 0.03 +/- 0.001

[Wed May 22 13:52:24 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 13:52:24 2013] Using photon index=1.80, rate=0.00467, arf fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src2.arf
[Wed May 22 13:52:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 13:52:24 2013] Updating source flux to 8.6e-14
[Wed May 22 13:53:08 2013] Flag c found in src. 2 procflags, skipping spectral fitting
[Wed May 22 13:53:35 2013] xmm0550670501/analysis//spectral/fullrun_mos2_xmm0550670501_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete